HydroMaxx 406-005-1 Installation guide

Installation Guide for PVC Pipe Slip x Slip 90 degree Elbow

If the pipes needing joined form a 90 degree angle or turn and both ends have smooth ends, you

would use a 90 degree slip (or slip x slip) elbow. Schedule 40 PVC 90 degree ells are designed to

turn the flow of a liquid at a 90 degree angle. Both pipe ends are glued into the ell, forming a 90

degree turn or joint.

Steps:

1. Before you try to fit your ends together wipe down both pipe ends and inside the elbow and

apply PVC glue

2. Once your sealant is applied insert the 2 PVC pipe ends into the 90 degree Elbow.

3. Wipe off excess pipe glue