HydroMaxx 406-005-1 Installation guide

Type
Installation guide
Installation Guide for PVC Pipe Slip x Slip 90 degree Elbow
If the pipes needing joined form a 90 degree angle or turn and both ends have smooth ends, you
would use a 90 degree slip (or slip x slip) elbow. Schedule 40 PVC 90 degree ells are designed to
turn the flow of a liquid at a 90 degree angle. Both pipe ends are glued into the ell, forming a 90
degree turn or joint.
Steps:
1. Before you try to fit your ends together wipe down both pipe ends and inside the elbow and
apply PVC glue
2. Once your sealant is applied insert the 2 PVC pipe ends into the 90 degree Elbow.
3. Wipe off excess pipe glue
  • Page 1 1

HydroMaxx 406-005-1 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI