EdgeStar KC1000SS User guide

Type
User guide

This manual is also suitable for

EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754
www.edgestar.com • contact@edgestar.com
*Warranty service should be performed by an authorized service representative only.
Exterior Dimensions
Document Type: Dimensional Drawing
Model: BR1000S, KC1000SSS
Version: 2.0 01012019
17 1/2 “ (445 mm)
18 1/4“ (464 mm)
33 1/4 “ (845mm)
Top View
Side View
17 1/2“ (445 mm)
19 1/16 “ (485 mm)
12 7/8 “ (327 mm) 5 7/16 “ (138 mm)
Front View
33 1/4 “ (845 mm)
8 13/16 “ (224 mm)
EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754
www.edgestar.com • contact@edgestar.com
*Warranty service should be performed by an authorized service representative only.
Exterior Dimensions withTower*
Document Type: Dimensional Drawing
Model: BR1000SS,KC1000SS
Version: 2.0 01012019
*Tower dimensions are approximate and may vary depending on your customized setup. In order for your unit to cool and operate correctly, the tower must be installed per the instructions in the
user’s manual. It is highly recommended that you have the unit onsite before making any modications to countertops or cabinetry in order to accommodate the tower. Improper installation may
void the warranty. EdgeStar and its aliate companies are not responsible for damage incurred through the installation process.
Top View
17 1/2“ (445 mm)
19 1/16 “ (485 mm)
12 7/8 “ (327 mm)
5 7/16 “ (138 mm)
6 7/16 “ (163 mm)
12 5/16 “ (313 mm)
18 1/4“ (464mm)
33 1/4 “ (845mm)
33 1/4 “ (845mm)
17 1/2 “ (445mm)
11 7/8 “ (302 mm)
5 7/16 “ (138 mm)
Front View Side View
EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754
www.edgestar.com • contact@edgestar.com
*Warranty service should be performed by an authorized service representative only.
Interior Dimensions
Document Type: Dimensional Drawing
Model: BR1000SS, KC1000SS
Version: 2.0 01012019
Side View
Top View
14 7/8 “ (378 mm)
29 5/16 “ (745 mm)
15 “ (381 mm)
15 3/8 “ (390 mm)
EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754
www.edgestar.com • contact@edgestar.com
*Warranty service should be performed by an authorized service representative only.
Door Swing
Document Type: Dimensional Drawing
Model: BR1000SS, KC1000SS
Version: 2.0 01012019
17 1/2 “ (445 mm)
34 3/4” (883 mm)
1 9/16 “ (39 mm)
2 3/16 “ (56mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

EdgeStar KC1000SS User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI