EdgeStar KC3000TWIN Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

EdgeStar, 8606 Wall St, Suite 1800, Austin, TX 78754
support.edgestar.com • service@edgestar.com • edgestar.com
*Warranty service should be performed by an authorized service representative only.
Exterior Dimensions
Document Type: Dimensional Drawing
Model:
KC3000 KC3000SS
Version:
V1.0 07192018
Front View Side View
33 9/16 “ (853 mm)
23 13/16 “ (605 mm)
35 1/4 “ (896 mm)
25 1/4 “ (642 mm)
20 7/8 “ (530 mm)
23 9/16 “ (599 mm)
EdgeStar, 8606 Wall St, Suite 1800, Austin, TX 78754
support.edgestar.com • service@edgestar.com • edgestar.com
*Warranty service should be performed by an authorized service representative only.
Exterior Dimensions with Tower*
Document Type: Dimensional Drawing
Model:
KC3000 KC3000SS
Version:
V1.0 07192018
*Tower dimensions are approximate and may vary depending on your customized setup. In order for your unit to cool and operate correctly, the tower must be installed per the instructions in the
user’s manual. It is highly recommended that you have the unit onsite before making any modications to countertops or cabinetry in order to accommodate the tower. Improper installation may
void the warranty. EdgeStar and its aliate companies are not responsible for damage incurred through the installation process.
23 9/16 “ (599 mm)
20 7/8 “ (530 mm)
25 1/4 “ (642 mm)
23 13/16 “ (605 mm)
50 7/16 “ (1281 mm)
15 3/16 “ (386 mm)
Front View Side View
2 3/4 “ (70 mm)
35 1/4 “ (896 mm)
3 3/8 “ (86 mm)
48 3/4 “ (1239 mm)
EdgeStar, 8606 Wall St, Suite 1800, Austin, TX 78754
support.edgestar.com • service@edgestar.com • edgestar.com
*Warranty service should be performed by an authorized service representative only.
Document Type: Dimensional Drawing
Model:
KC3000 KC3000SS
Version:
V1.0 07192018
Front View Side View
Interior Dimensions
23 13/16 “ (605 mm)
8 7/16 “
(214 mm)
18 3/8 “ (467 mm)
Top View
28 5/16 “ (719 mm)
16 1/4 “ (413 mm)
9 1/8 “
(232 mm)
8 1/8 “
(206 mm)
3 1/8”
(79 mm)
21 “ (533 mm)
13 1/4 “ (337 mm)
20 1/4 “ (514 mm)
EdgeStar, 8606 Wall St, Suite 1800, Austin, TX 78754
support.edgestar.com • service@edgestar.com • edgestar.com
*Warranty service should be performed by an authorized service representative only.
Door Swing Dimensions
Document Type: Dimensional Drawing
Model:
KC3000 KC3000SS
Version:
V1.0 07192018
39 15/16 “ (1014 mm)
40 11/16 “ (1033 mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

EdgeStar KC3000TWIN Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI