Eisen Home EH-LEDB-3627 Operating instructions

Bluetooth - Turn On/O, Pair Device

Plug in the mirror and hold for 3 seconds until you hear a power on tone.

Hold again for 3 seconds to turn o until you hear a power o tone.

Activate Bluetooth on your mobile device. Search for “Eisen-smartLED-Mirror” in your settings and tap to connect.

Once your device is connected, play any song or audio ﬁle.

Audio - Skipping Songs, Volume Adjustment, Pausing Tracks

Tap once to pause, then once again to resume audio

Tap to skip to the previous song in the playlist

Hold to lower the volume

Tap to skip to the next song in the playlist

Hold to increase the volume

LED Light - Turn On/O, Dim

Tap to turn on the LED light, then once again to turn it o

When the LED light is on, hold to dim, or let go and hold again to increase the brightness

smartLED Illuminated Mirror with Bluetooth Speakers

INSTRUCTION MANUAL

www.eisenhome.com

If any questions or concerns arise, please contact us via email at [email protected], or give us a call at (424) 341-3183

This manual is also suitable for

Download PDF