Hampton Bay 1015VKIT-WH is a 3-light LED track light kit with a white finish. It is dimmable and has a swivel design that provides 350° horizontal and 90° vertical adjustability. The kit includes three track lights, one track, one floating power canopy, and one floating live end connector. It is designed for indoor use only and should not be installed in damp or wet locations. The track light kit is easy to install and can be used to create a variety of lighting configurations. It is perfect for use in kitchens, living rooms, bedrooms, and other areas of the home.
Hampton Bay 1015VKIT-WH is a 3-light LED track light kit with a white finish. It is dimmable and has a swivel design that provides 350° horizontal and 90° vertical adjustability. The kit includes three track lights, one track, one floating power canopy, and one floating live end connector. It is designed for indoor use only and should not be installed in damp or wet locations. The track light kit is easy to install and can be used to create a variety of lighting configurations. It is perfect for use in kitchens, living rooms, bedrooms, and other areas of the home.
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this track light kit. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Hampton Bay!
Model #1015VKIT
USE AND CARE GUIDE
3-LIGHT LED TRACK LIGHT KIT
WHITE FINISH
Questions, problems, missing parts? Before returning to the store
,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
UPC #847658003140
SKU #1001279383
2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................3
Pre-Installation .....................................3
Installation ........................................5
Safety Information
Read these installation instructions and review the diagrams
thoroughly before installing the track system. Save these
instructions and refer to them when additions or changes in the track
conguration are made.
□ This track light kit is rated at 120 volts, single-phase, 3-wire
with grounded neutral, 60Hz, 4.6W x 3.
WARNING: To prevent the risk of re and electric shock,
do not attempt to connect power tools, extensions cords,
appliances, etc to the track system.
WARNING:This equipment has been tested and found
to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules and ICES-005 of the
IC Rules. These limits are designed to provide reasonable
installation protection. This equipment generates and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving area.
Increase the separation between the equipment and the
receiver.
Connect the equipment into a different outlet and circuit
from the receiver outlet and circuit.
Consult the dealer or an experienced radio/TV technician for
help.
WARNING: Changes or modication to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
WARNING: Do not cut any sections of the track.
WARNING: Do not install any track light assembly closer
than 6 in. from any curtain, or similar combustible material.
WARNING: Always disconnect electrical power before
adding to or changing the conguration of the track.
WARNING: Do not attempt to energize anything other
than track lights on the track.
CAUTION: For indoor and dry location use only. Do not
install in damp or wet locations.
CAUTION: The LED cannot be replaced.
CAUTION: Do not stare directly into the LED light.
CAUTION: To reduce the risk of re and electric shock,
use only with Hampton Bay’s LED track luminaire, model
1015V, max 3 pieces. Ceiling mount only.
CAUTION: Do not install any part of this track system less
than 7 ft. (2.2 m) above the oor.
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
LIMITED WARRANTY
The manufacturer warrants this product to be free from defects in materials and workmanship for a period of ve (5) years from date
of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modications,
alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or
used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product
as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material
workmanship. The manufacturer specically disclaims any liability and shall not be liable for any consequential or incidental loss or
damage, including labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Installation
PRODUCT FEATURES
□ High output LED that provides a warm light
□ Swivel design provides 350° horizontally and adjustable up to 90° vertically
□ Dimmable
□ Track luminaire can be located anywhere along the track section
PLANNING INSTALLATION
Before you begin installation, check to ensure all parts listed in the Hardware Included and Package Contents sections are contained within
the packaging and that there is no damage to any of the parts. If any part appears missing or damaged, do not install or use this light.
Contact customer service.
TOOLS REQUIRED
Phillips screwdriver Safety goggles
4
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
BB
AA
CC
Part Description Quantity
AA Toggle bolt 2
BB Plastic anchor 2
CC Wire connector 3
PACKAGE CONTENTS
E
A
B
D
C
Part Description Quantity
A Floating power canopy 1
B Track light 3
C Track 1
D Mounting plate with setscrews
(Preassembled to Floating power canopy (A))
1
E Floating live end connector
(Preassembled to Floating power canopy (A))
1
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Connecting the live end connector to
the track
CAUTION: When the oating live-end connector is twisted
into position, ensure that the two copper tabs at the base
of the connector align with the two copper bars inside the
track. This is necessary to maintain polarity.
The track (C) and oating live end connector (E) must be
assembled so that polarity between the conductors is maintained.
□ Remove the oating power canopy (A) from the mounting
plate (D) and oating power connector (E).
□ Align the connector tab (1) of the oating live end
connector (E) with the indentation (2) on the track (C).
Insert the live end connector into the track (C) so that the
base of connector (E) ts ush against the track (C).
□ Twist the connector (E) clockwise one-quarter turn so that
the connector tab (1) ts snugly against the track (C).
IMPORTANT: The oating live end connector (E) should
be positioned along the track (C) so that it will align with
the outlet box after the track is installed to the ceiling. The
canopy (A) must enclose the oating live-end connector (E)
and cover the outlet box. The plastic canopy (A) should not
cover the track mounting attachment holes. It should attach
to the mounting plate (D) with the two setscrews after the
electrical connections are made.
E
1
2
C
D
2
Attaching the mounting plate to the
track
□ Place the mounting plate (D) on the back side of the
track (C) so that the preassembled setscrews (1) on the
mounting plate (D) will t over the ridges on both sides of
the track (C). This will ensure grounding continuity.
□ Remove the preassembled setscrews (1) from the
mounting plate (D).
□ Center the mounting plate (D) with the oating live end
connector (E), position the oating power canopy (A) over
the connector (E) and mounting plate (D), and install the
setscrews (1) on both sides of the track (C).
□ Pass the wires from the oating live end connector (E)
through the hole in the mounting plate (D) up toward the
ceiling outlet box.
E
1
A
D
C
6
Installation (continued)
3
Making the electrical connections
□ When removing the supply wires from the ceiling outlet
box, ensure that the white supply and black supply wires
are on one side of the track (C) and the green ground wire
is on the other side.
□ Connect the white wire (N) from the supply circuit to the
white wire from the oating power canopy (A).
□ Connect the black wire (L) from the supply circuit to the
black wire from the oating power canopy (A).
□ Connect the green ground wire (G) from the supply circuit
to the green conductor of the oating power canopy (A).
□ Secure the connections with wire connectors (CC).
N
G
L
CC
A
C
□ The xture is dimmable, compatible with these dimmers
sold at The Home Deport store, marked with product
Model# and SKU# (Lutron brand: DVWCL-153PH-WH /
530826; CTCL-153PDH-WH / 267858; TGCL-153PH-WH /
527401; S-600PR-WH / 396682; TG-600PR-WH / 400017;
Leviton brand: R62-06683-0IW / 534006; R12-06672-1LW /
1000024040.) If using a triac dimmer, refer to this diagram
for wiring schematic:
Dimmer
Green
Ground
White
L
N
Black
□ Make sure the lights are in a single loop and a single pole
with the dimmers, and the total wattage of the lights do
not exceed the dimmer wattage capacity. Please refer to
wattage capacity on dimmer packaging.
□ Please contact customer service if you have any further
question on the lights or dimmers.
4
Attaching the track to the ceiling
□ Raise the track assembly to the ceiling. Mark the mounting
hole locations with a pencil. Ensure the oating live end
connector (A) is positioned over the ceiling outlet box.
□ Drill a hole suitable for the fasteners you will be using
(either toggle bolts (AA) or plastic anchors (BB)). The toggle
bolts (AA) supplied with the track (C) require 5/8 in. holes.
□ If using toggle bolts (AA), remove the wings from the bolts
(AA) and position them on the other side of the ceiling.
Insert the bolts (AA) into the holes at both ends of the track
(C), through the pre-drilled holes in the ceiling and into the
wings.
□ Screw the bolts (AA) into the wings until the track is about
1/4 in. from the ceiling. Do not fully tighten the bolts (AA)
until all electrical connections have been made and are
working properly.
A
AA
AA
C
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
5
Installing the track lights onto the
track
□ Push the top portion of the track light (B) into the slot on
the track (C).
□ Pull down the locking tab on the adaptor portion of the
track light (B).
□ Turn the two copper conductors (1) on the track light (B)
90° toward the ground groove (2) on the track (C).
B
1
2
C
6
Locking the track lights onto the track
□ Rotate the adaptor 90° to lock the LED track light (B) into a
section of the track (C).
□ Once the light is locked securely, you can swivel the LED
track light (B) 350° horizontally and 90° vertically.
□ To remove the track lights, pull down on the locking tab
and at the same time, rotate the adaptor 90°.
C
B
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Hampton Bay 1015VKIT-WH is a 3-light LED track light kit with a white finish. It is dimmable and has a swivel design that provides 350° horizontal and 90° vertical adjustability. The kit includes three track lights, one track, one floating power canopy, and one floating live end connector. It is designed for indoor use only and should not be installed in damp or wet locations. The track light kit is easy to install and can be used to create a variety of lighting configurations. It is perfect for use in kitchens, living rooms, bedrooms, and other areas of the home.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hampton Bay CFL-F319001A BN Operating instructions
-
Hampton Bay 18759-4 Operating instructions
-
Hampton Bay 5A1600N-SN User guide
-
Hampton Bay ECP13-LED User guide
-
Hampton Bay 804029 Installation guide
-
Hampton Bay 814020 Installation guide
-
Hampton Bay 804089 Installation guide
-
Hampton Bay YG529-WH Installation guide
-
Hampton Bay YG187-WH Installation guide
Other documents
-
ecolight UC1051-WH2-30LF0-E User guide
-
Sunco Lighting S-600H-2PH-WH Installation guide
-
Schlage Top Mount - Sliding Door Barn Door Hardware - 8ft Installation guide
-
mirrea GDSD02 User manual
-
Satco TP241 Operating instructions
-
Sunco Lighting S-600H-2PH-WH 150W User guide
-
WAC Lighting H System Connector Operating instructions
-
-
Air Cool 161646014 Operating instructions
-
Unbranded 8239255776 Operating instructions
