2. Satco
  3. TP241

Satco TP241 Operating instructions

  • Hello! I've reviewed the installation instructions for the SATCO track lighting models TP240, TP241, and TP242. This document outlines the process for safely mounting and adjusting your new system, including disconnecting power and using the quick-release button for cable adjustments. I'm ready to answer any questions you have!
  • What should I do first before installation?
    How do I secure the track?
    How do I adjust the cable length?
Toggle bolt
Canopy
Canopy Cable holder
Galvanized cable
Quick-release button
Track Cable holder
Strain Relief
Installation Instructions
ITEM NO. : TP240 TP241 TP242
Bolt
Track
Ceiling
1. Make sure Power is disconnected. Pass Bolt through keyhole slots in track and secure to Track Cable holder.
2. Pass the Canopy cable holder through Ceiling cover plate into Ceiling, and tighten with Toggle bolt.
3. Adjust cable length using Quick-release button.
/