Merlin Sonic X User manual

Brand: Merlin

Model: Sonic X

Type: User manual

Thank you for purchasing this Merlin Product. Please read the

instruction manual carefully before using the product.

The documentation provided will allow you to fully enjoy all the

features this unit has to offer.

Please save this manual for future reference.

Product Content

- A pair of wireless earphones (Left and Right)

- Charging Base/Dock

- Charging Cable

- QR Code stub for the product page and user manual

Instruction

Charging the Base

- The base can be charged from any USB port like smartphone’s USB

charger, Computer’s USB port, and Car USB charger with the use of

the included Micro USB cable

- And a blue LED indicator just below the charging port can tell the

charging status of the base by a certain number of flashing.

1 – Flash means 25% full;

2 – Flash means 50% full;

3 – Flash means 75% full;

4 – Flash means 100% full

Charging the Earphones

- Insert the earphones properly to their corresponding seats and

close the cover gently.

- Observe the LED of the earphones to know their charging status.

If the LED flashes by fading on and off means that it is charging and

once it is full, the LED will turn off.

Pairing

Solo Use

- Tap and hold either Left or Right earphone for about 5 seconds to

turn the device ON and eventually put it in pairing mode.

- Open your Bluetooth in smartphone and pair it with “SonicX”

Dual Use

- Tap and hold both earphones for about 3 seconds to turn them ON

and eventually get in sync and be in pairing mode. Please take note

that both earphones has their way of connecting to each other and

automatically manages to put the right earphone into pairing

mode. So, always keep your smartphone at your right pocket to

avoid signal interference.

- If in case that you decided to use both from solo then all you have

to do is to simply turn ON the other side and wait until it gets

synchronized.

Touch Navigation (Playback Mode)

- Both earphones has touch panel with commands as follow:

Switch ON – tap and hold for about 3 seconds

Switch OFF – tap and hold for about 8 seconds

Tap (once) – Play/Pause

Tap (twice) – Volume+ (Left) or Volume- (Right)

Tap (hold) – Next Track (Left) or Previous Track (Right)

Touch Navigation (Call Mode)

Tap (once) – Answer/End the call

Tap (twice) – Call Volume+ (Left) or Call Volume- (Right)

Tap (hold) – Reject Incoming call

FAQ

Q) Why is the device not charging?

A) Possible reasons are faulty charging cable or faulty charger

(power source). This can be sorted out by using a different

charging cable or a different power source like your

smartphone’s USB charger or a computer. Make sure that the

LED indicator of the base is flashing.

Q) Why there is signal interference during Playback or Phone Call.

A) Human body contains a lot of water which hinders

electromagnetic waves. So please make sure that your

smartphone is located somewhere within the line of sight of

the right earphone.

Maintenance

1. Retain these instructions for future use.

2. Clean the product with a damp cloth and mild soap.

3. Do not expose this product to rain or moisture.

4. Be careful not to turn or twist the cables used in this product

too much as it can lead to malfunction and failure.

5. This product is not designed to be submerged in water and

will malfunction if this occurs.

6. This product has no user serviceable items inside. Do not

open this product as the user risk injury and would void the

warranty.

7. Keep unit away from strong magnetic fields to avoid

interference with the product.

Merlin Sonic X User manual

Merlin Sonic X User manual

Merlin Sonic X User manual

Related papers

Other documents