Logik LHDR15 User manual

Brand: Logik

Model: LHDR15

Category: Alarm clocks

Type: User manual

LHDR15

DAB RADIO

LHDR15_IB.indd 1 24/02/2016 08:30

Contents

Safety Warnings .....................................................................................................................................4

Unpacking .............................................................................................................................................. 6

Product Overview ..................................................................................................................................7

Front View .............................................................................................................................................................................7

Rear View ......................................................................................................................................... 8

Power Source .........................................................................................................................................9

Battery Power ......................................................................................................................................................................9

Knowing When to Replace the Batteries ...................................................................................................................9

Mains Power .....................................................................................................................................................................10

Connections .........................................................................................................................................10

Connecting to the Earphones Socket......................................................................................................................10

Basic Operation ...................................................................................................................................11

Powering ON/OFF ...........................................................................................................................................................11

Selecting Modes ..............................................................................................................................................................11

Adjusting the Volume....................................................................................................................................................11

DAB Menu Overview .....................................................................................................................................................11

Setting the Clock Automatically ................................................................................................................................12

Setting the Clock and Date Manually ......................................................................................................................12

Changing the Time Format .........................................................................................................................................12

Changing the Date Format ..........................................................................................................................................12

Setting the Alarm (Mains Operation Only) ............................................................................................................ 13

Activating/Deactivating the Alarm Function .......................................................................................................14

Turning the Alarm O When it Sounds ...................................................................................................................14

Snooze Function (Mains Operation Only) ..............................................................................................................14

Sleep Function ................................................................................................................................................................. 14

System Reset (Mains Operation Only) ..................................................................................................................... 15

Display Backlight .............................................................................................................................................................15

DAB Operation ..................................................................................................................................... 16

DAB Auto Scan .................................................................................................................................................................16

Secondary Services ........................................................................................................................................................16

Manual Tuning ................................................................................................................................................................. 17

Pruning Radio Stations .................................................................................................................................................17

Storing Stations ............................................................................................................................................................... 17

Recalling a Stored Station ............................................................................................................................................17

DAB Display Modes ........................................................................................................................................................ 18

LHDR15_IB.indd 2 24/02/2016 08:30

FM Operation .......................................................................................................................................19

Switching between DAB and FM Mode ..................................................................................................................19

Auto Scan ...........................................................................................................................................................................19

Manual Scan .....................................................................................................................................................................19

FM Menu Overview ........................................................................................................................................................19

Scan Settings ....................................................................................................................................................................20

Audio Setting ...................................................................................................................................................................20

Storing Stations ............................................................................................................................................................... 20

Recalling a Stored Station ............................................................................................................................................20

FM Display Modes ..........................................................................................................................................................21

Maintenance ........................................................................................................................................22

Hints and Tips ......................................................................................................................................22

Specication ........................................................................................................................................22

LHDR15_IB.indd 3 24/02/2016 08:30

• Read all the instructions carefully before using

the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a

third party make sure to include this manual.

• Check that the voltage marked on the rating

label matches your mains voltage.

Damage

• Please inspect the unit for damage after

unpacking.

• Do not continue to operate the unit if you are

in any doubt about it working normally, or if it

is damaged in any way – switch o, withdraw

the mains plug and consult your dealer.

Location of Unit

• The unit must be placed on a at stable

surface and should not be subjected to

vibrations.

• Do not place the unit on sloped or unstable

surfaces as the unit may fall o or tip over.

• The mains socket must be located near the

unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature

• Avoid extreme degrees of temperature, either

hot or cold. Place the unit well away from heat

sources such as radiators or gas/electric res.

• Avoid exposure to direct sunlight and other

sources of heat.

Naked Flames

• Never place any type of candle or naked ame

on the top of or near the unit.

Moisture

• To reduce the risk of re, electric shock or

product damage, do not expose this unit

to rain, moisture, dripping or splashing. No

objects lled with liquids, such as vases,

should be placed on the unit.

• If you spill any liquid into the unit, it can cause

serious damage. Switch it o at the mains

immediately. Withdraw the mains plug and

consult your dealer.

Safety Warnings

Ventilation

• To prevent the risk of electric shock or re

hazard due to overheating, ensure that

curtains and other materials do not obstruct

the ventilation vents.

• Do not install or place this unit in a bookcase,

built-in cabinet or in another conned space.

Ensure the unit is well ventilated.

Safety

• Always disconnect the unit from the mains

supply before connecting/disconnecting

other devices or moving the unit.

• Unplug the unit from the mains socket during

a lightning storm.

Mains Cable

• Make sure the unit or unit stand is not resting

on top of the mains cable, as the weight of the

unit may damage the mains cable and create

a safety hazard.

• If the mains cable is damaged it must be

replaced by the manufacturer, its service

agent, or similarly qualied persons in order to

avoid a hazard.

Interference

• Do not place the unit on or near appliances

which may cause electromagnetic

interference. If you do, it may adversely aect

the operating performance of the unit, and

cause a distorted picture or sound.

Batteries

• Batteries used in the unit are easily swallowed

by young children and this is dangerous.

• Keep loose batteries away from young

children and make sure that the battery

holder tray is secure in the unit. Seek

medical advice if you believe a cell has been

swallowed.

• Please dispose of batteries correctly by

following the guidance in this manual.

LHDR15_IB.indd 4 24/02/2016 08:30

Supervision

• Children should be supervised to ensure that

they do not play with the unit and the remote

control.

• Never let anyone especially children push

anything into the holes, slots or any other

openings in the case - this could result in a

fatal electric shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of

uninsulated “dangerous voltage” within the

unit’s enclosure that may be of sucient

magnitude to constitute a risk of electric

shock.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

manual accompanying the unit.

Service

• To reduce the risk of electric shock, do not

remove screws. The unit does not contain

any user-serviceable parts. Please leave all

maintenance work to qualied personnel.

• Do not open any xed covers as this may

expose dangerous voltages.

Maintenance

• Ensure to unplug the unit from the mains

socket before cleaning.

• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may

damage the unit’s surface.

• Do not use liquids to clean the unit.

LHDR15_IB.indd 5 24/02/2016 08:30

Thank you for purchasing your new Logik DAB Radio.

We recommend that you spend some time reading this instruction

manual in order that you fully understand all the operational features

it oers. You will also nd some hints and tips to help you resolve

any issues.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so

according to local regulations.

The following items are included:

DAB Radio

Mains Adaptor

PRESET

VOLUME

ALARM

MODE

INFOSNOOZE

SELECT

If items are missing, or damaged please contact Partmaster (UK only).

Tel: 0344 800 3456 for assistance.

LHDR15_IB.indd 6 24/02/2016 08:30

1. Speaker

2. MODE Button

STANDBY Button

4. ALARM/SNOOZE

Button

5. MENU/INFO Button

6. VOLUME Control

7. SELECT Button

8. LCD Display

button

10.

button

11. PRESET Button

Product Overview

Front View

PRESET

VOLUME

ALARM

MODE

INFOSNOOZE

SELECT

5 64 7

LHDR15_IB.indd 7 24/02/2016 08:30

Rear View

1. DAB/FM Aerial

2. Mains Adaptor Socket

3. Earphones Socket

4. Battery Compartment Door

LHDR15_IB.indd 8 24/02/2016 08:30

Power Source

Your unit can be battery powered or mains powered, we recommend for prolonged use to

use the mains power.

Battery Power

Insert 4 x 1.5V AA battery (not included) into the battery compartment located at the rear

of the unit.

Battery Life (Approximate Hours) volume set to 50%

DAB FM

Battery Type

Alkaline (Size AA)

17 17

Using your radio at high volume will reduce your battery life.

Knowing When to Replace the Batteries

• When the batteries lose power, the sound becomes weak and distorted.

• When the batteries are completely exhausted, the power is turned o.

Always switch the unit o after use to conserve the battery life.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which

could cause personal injury or damage to property.

• Install the batteries correctly by following the polarity (+ and –) indications in the

battery compartment.

• Use only the types of the batteries which are indicated in this manual.

• Do not install new batteries with used ones and do not mix dierent types of batteries.

• Do not dispose of the used batteries as domestic waste. Dispose of them in accordance

with local regulations.

• If you are not going to use the unit for a long time, remove the batteries to avoid

damage from battery leakage and corrosion.

• Due to the short battery life span of some alkaline batteries. It is recommended to use

rechargeable batteries. You will need to purchase a charger to charge the rechargeable

batteries. This saves cost and is more environmentally friendly.

Alarm and System function are not

available under battery power.

LHDR15_IB.indd 9 24/02/2016 08:30

Mains Power

This unit will automatically scan for DAB radio stations

when switched on for the rst time. Before connecting

the power cable, fully extend the aerial vertically to

ensure best reception.

Before using, connect the supplied power cable to the mains cable socket at the rear

of the unit and to the mains socket.

Connections

Connecting to the Earphones Socket

1. Connect earphones (3.5mm stereo mini plug) to the earphones socket.

2. Always set the volume level to minimum then slowly increase the volume to obtain the

desired volume level.

3. When the earphones are connected, the speaker will automatically mute.

Long-term exposure to loud music may cause hearing damage. It is best to avoid

extreme volume when using earphones, especially for extended periods.

LHDR15_IB.indd 10 24/02/2016 08:30

Basic Operation

Powering ON/OFF

• When you rst switch the unit on it will be in STANDBY mode. Press the STANDBY

button to switch it on. The rst time the unit is switched on it will scan for available radio

stations.

• Press the

STANDBY button again to switch the unit back to standby mode.

• To switch the unit o completely, disconnect the mains plug from the mains socket.

Selecting Modes

Press the MODE button to switch between DAB and FM mode.

Adjusting the Volume

Adjust the volume to the desired level by turning the VOLUME control.

DAB Menu Overview

Below is a map of the menu structure of the unit to help you see how to navigate through

the menus.

1. Press and hold the MENU/INFO button to enter the menu.

2. Use the

or button to scroll through the options.

3. Press the SELECT button to select an item in the menu.

Menu Full Scan

Manual Tune

Prune

System Time Set Time/Date

Auto Update

Set 12/24 Hour

Set Date Format

Sleep

Factory Reset

Backlight

SW Version

LHDR15_IB.indd 11 24/02/2016 08:30

Setting the Clock Automatically

The clock on this unit can automatically synchronize with the time transmitted by either

DAB or some FM radio stations, so there is no need to set it manually.

In order for the clock to synchronise to the current local time you may have to leave it on

one DAB station for a short period of time. Manual clock setting is not required.

1. Press and hold the MENU/INFO button to enter the menu.

2. Select “System” - “Time” - “Auto Update”. Choose “Update From DAB”, “Update

From FM” or “Update From Any”.

3. Press SELECT to conrm your selection.

Setting the Clock and Date Manually

You can manually set the time and date if you wish. Make sure you have set AUTO UPDATE

to ‘NO UPDATE’. If you don’t do this the unit will automatically nd the correct time from

a radio station and change the time you have set.

1. Press and hold the MENU/INFO button to enter the menu.

2. Select “System” - “Time” - “Set Time/Date”. Set the time and date using the

and buttons.

3. Press SELECT to conrm your selection.

Changing the Time Format

You can set the time format to either a 12 hour clock or a 24 hour clock.

1. Press and hold the MENU/INFO button to enter the menu.

2. Select “System” - “Time” - “Set 12/24 Hour”. Then choose either “Set 12 Hour”

or “Set 24 Hour” using the

and buttons.

3. Press SELECT to conrm your selection.

Changing the Date Format

The way the date is displayed can be changed depending way you prefer. You can choose

“DD-MM-YYYY” or “MM-DD-YYYY”.

1. Press and hold the MENU/INFO button to enter the menu.

2. Select “System” - “Time” - “Set Date Format”. Then choose the date format using

the

and buttons.

3. Press SELECT to conrm your selection.

LHDR15_IB.indd 12 24/02/2016 08:30

Setting the Alarm (Mains Operation Only)

Make sure you have preset FM and DAB stations before setting the Alarm.

1. The unit has two alarms. Press the ALARM/SNOOZE button to set alarm 1 or alarm 2.

The display will show “Alarm # Setup”.

2. Press the SELECT button, then use the

and

buttons to set the hour. Press SELECT to conrm.

3. The minute digits will ash. Use the

and

buttons to set the minutes. Press SELECT button

to conrm.

4. If the time format is set to 12 hour clock choose AM

or PM. Use the

and buttons to set, then press

SELECT to conrm.

5. Use the

and buttons to select the alarm

duration (90/60/45/30/15 minutes). Press SELECT

to conrm.

6. Use the

and buttons to select the type of alarm

(Buzzer/FM/DAB). Press SELECT to conrm.

7. If you have chosen FM or DAB, use the

and

buttons to select the last listened to radio station or

a preset radio station. Press the SELECT button

to conrm.

8. Use the

and buttons to select the day(s) the

alarm is set for (daily/weekdays/weekends/once).

Press SELECT to conrm.

9. Use the

and buttons to select the alarm wake

up volume level. Press SELECT to conrm.

10. Use the

and buttons to select alarm on or o.

Press SELECT to conrm.

11. When set, the alarm icon and number will appear

on the display in Standby mode.

LHDR15_IB.indd 13 24/02/2016 08:30

Activating/Deactivating the Alarm Function

These changes must be made with the unit in standby mode.

1. To activate or deactivate the alarm function, press the ALARM/SNOOZE button, then

press the

or buttons to select “Alarm On” or “Alarm O”.

2. Press the SELECT button to conrm.

If you have activated the alarm function and the wake-up mode is DAB or FM,

make sure that the volume is at a sucient level for you to hear.

Turning the Alarm O When it Sounds

• When the alarm sounds press the STANDBY button to switch the alarm o.

Snooze Function (Mains Operation Only)

When the alarm has been triggered, press the

ALARM/SNOOZE button to temporarily switch o the

alarm. Press the ALARM/SNOOZE button to select a

time 5 - 10 - 15 - 30 minutes. The display will show

“Zz” to indicate that snooze is on and the display will

show the minutes remaining before the alarm sounds again.

If one alarm goes o while the other is in snooze mode, snooze mode will

be cancelled.

Sleep Function

This function allows you to program the unit to switch o by itself after a set period of time.

1. Press and hold the MENU/INFO button to enter the menu.

2. Press the

or button until “System” shows on the display.

3. Press SELECT to conrm.

4. Press the

or button until “Sleep” shows on the display.

5. Press SELECT to conrm.

6. Press the

or button to select from Sleep o/10/20/30/60/70/80/90 minutes.

7. Press SELECT to conrm.

8. When the sleep timer is zero, the unit will switch to STANDBY mode.

LHDR15_IB.indd 14 24/02/2016 08:30

System Reset (Mains Operation Only)

There may be times when you need to reset your unit back to the factory settings,

especially if you have moved house or if you experience reception problems.

If you move to another part of the country and pick up the local and national DAB stations

in that area, your previously tuned channels may no longer be available.

1. Press and hold the MENU/INFO button to enter the menu.

2. Press the

or button until “System” shows on

the display.

3. Press SELECT to conrm.

4. Press the

or button until “Factory Reset” shows on the display.

5. Press SELECT to conrm

6. Press the

button to select “Yes” .

7. Press the SELECT button to conrm. “Restarting...”

shows on the display. After the reset is complete,

the unit will go to standby mode.

8. Press the

STANDBY button again to turn the unit on, the unit will then start scanning

for DAB channels immediately.

After the system reset, all the tuned stations, DAB and FM preset stations and

alarm settings will be erased.

Display Backlight

In mains power mode there are three backlight levels to choose from.

1. Press and hold the MENU/INFO button to enter the menu.

2. Press the

or button until “System” shows on the display.

3. Press SELECT to conrm.

4. Press the

or button until “Backlight” shows on the display.

5. Press SELECT to conrm.

6. Press the

or button to select “Low”, “Medium” or “High”.

7. Press SELECT to conrm.

There are no backlight settings in battery mode.

LHDR15_IB.indd 15 24/02/2016 08:30

DAB Operation

Ensure that you fully extend the aerial vertically before switching the unit on. When the unit

is connected to the mains power and then switched on from standby for the rst time, or

you have just performed a factory reset the unit will automatically enter into the DAB mode

and perform auto scan function.

During the scan the display will show “Scanning ...”

together with a slide bar that indicates the progress

of the scan and the amount of stations that have been

found so far.

Once the scan has nished, the unit will select the rst

alphanumerically found station.

To scroll through the found stations, press the

or button and then press the

SELECT button to listen to the selected station.

DAB Auto Scan

The auto scan will search for the entire DAB Band III channels. After the scan has nished,

the rst alphanumerically found station will be automatically selected.

Full auto scan will not replace the DAB stations in memory it will add to it. If

you want to remove all the previous scanned stations, system reset or Prune is

required.

1. Press and hold the MENU/INFO button to enter the menu.

2. Press the

or button to select “Full scan”.

3. Press SELECT to conrm. The display will show “Scanning …” and a progressing

slide bar.

4. All the stations found will be stored automatically. To scroll through these stations, press

the

or button and then press the SELECT button to listen to the selected station.

Secondary Services

You may see a “<” symbol after the name of the station, this indicates that there are

secondary services available to that station. These secondary services contain extra

services that are related to the primary station. e.g. a sports station may want to add extra

commentaries. The secondary services are inserted directly after the primary station in the

station list.

To select the secondary station, press the SELECT button when the “<” appears in

the display before the station name. When the secondary service ends, the unit will

automatically switch back to the primary station.

LHDR15_IB.indd 16 24/02/2016 08:30

Manual Tuning

As well as the auto scan function, you can manually tune the radio. This can help if you

know your radio has missed stations. You will need to know which multiplex the missing

radio station is in.

1. Press and hold the MENU/INFO button to enter

the menu.

2. Use the

or button to select “Manual tune”.

3. Press the SELECT button to conrm the selection.

4. Use the

or button to cycle through the

multiplex list, which are numbered from 5A to 13F.

5. You won’t see any new radio stations or hear

anything while in manual tune. To nd the newly

tuned in stations search through the Station List.

Pruning Radio Stations

If you have tuned in your radio at more than one location (home and work) it will still have

stored all the radio stations it found, although some may now be a very poor reception.

The prune feature will delete all of the stations that are not available or are very

poor reception.

1. Press and hold the MENU/INFO button to enter the menu.

2. Use the

or button to select “Prune”.

3. Press the SELECT button to conrm the selection.

4. Use the

or button to select “ Ye s”.

5. Press SELECT to conrm. All stored stations that are poor reception or from another

location will now be deleted.

Storing Stations

You can store up to 10 DAB stations to the memory. This will enable you to access your

favourite stations quickly and easily and also enables you to choose one of the stations to

switch on when you set an alarm.

1. To store a preset, you must rst be listening to the station that you would like to save.

2. Press and hold the PRESET button. “Preset Store”

will show on the display.

3. Use the

and buttons to select your desired

preset station number and then press the SELECT

button to conrm.

4. The station will be stored and the screen will then show “Preset # Stored“.

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing

the PRESET button.

2. Press the

or button to select your desired preset station number.

3. Press the SELECT button to conrm the selection.

4. If you choose a preset that hasn’t been allocated a station, “Preset Empty“ will be displayed.

LHDR15_IB.indd 17 24/02/2016 08:30

DAB Display Modes

Every time you press the MENU/INFO button, the lower segment of the display will cycle

through the following display modes:

DLS (Dynamic Label Segment)

Dynamic label segment is a scrolling message that the broadcaster may include with their

transmissions. The message usually includes information, such as program details etc.

Signal Strength

The display will show a slide bar to indicate the signal strength, the stronger the signal,

the longer the bar will be from left to right.

Programme Type

This describes the “Style” or “genre” of music that is being broadcast e.g. “Rock” or

“Classical”. If the information is not available, the display will show “<Programme Type>”.

Multiplex Name

A multiplex is a collection of radio stations that are bundled and transmitted on one frequency.

There are national and local multiplexes. Local ones contain stations that are specic to

that area.

DAB – unlike normal radio, groups together several radio stations and transmits

them on one frequency.

Channel Number/Frequency

The number and frequency of the present station will be displayed.

Signal Error

This shows the quality of the signal reception, with 0 being the best quality reception.

Audio Bit Rate

The display will show the digital audio bit rate being received.

Power Status

The display will show the power source being used. If the power source is battery it will

show the battery capacity.

Time

The broadcaster (radio station) provides clock information automatically so there’s no need

to manually set this information.

Date

The broadcaster (radio station) provides date information automatically so there’s no need

to manually set this information.

LHDR15_IB.indd 18 24/02/2016 08:30

FM Operation

Switching between DAB and FM Mode

Press the MODE button to switch between DAB and FM mode.

Auto Scan

Ensure that you fully extend the aerial vertically before starting the auto scan. To

automatically search for the next FM station, press the SELECT button to start the auto scan.

The display will show “Scanning ...” . Once a station has been found, the scanning will stop

automatically.

Manual Scan

To search for FM stations manually, press the or buttons. Each press of the or

buttons will change the frequency by 0.05 MHz. Press and hold the or buttons to

automatically search for the next available radio station.

FM Menu Overview

Below is a map of the menu structure of your radio to help you see how to navigate

through the menus.

1. Press and hold the MENU/INFO button to enter the menu.

2. Use the

or button to scroll through the options.

3. Press the SELECT button to select an item in the menu.

Menu Scan Setting

Audio Setting

System

Time

Strong Stations Only

All Stations

Forced Mono

Stereo Allowed

Set Time/Date

Auto Update

Set 12/24 Hour

Set Date Format

SW Version

Backlight

Factory Reset

Sleep

LHDR15_IB.indd 19 24/02/2016 08:30

Scan Settings

You can set your radio to tune in just the strongest stations or all stations.

1. Press and hold the MENU/INFO button to enter the menu.

2. Use the

or button to select “Scan Setting”.

3. Press SELECT to conrm.

4. Use the

or button to choose “All stations” or “Strong stations only”.

5. Press SELECT to conrm your selection.

Audio Setting

The unit will automatically switch between stereo and mono mode, but you can override

this and switch this function manually. This can be helpful when receiving poor signal

reception.

1. Press and hold the MENU/INFO button to enter the menu.

2. Use the

or button to select “Audio Setting”.

3. Press SELECT to conrm.

4. Use the

or button to choose “Stereo allowed” or “Forced mono”.

5. Press SELECT to conrm your selection.

Storing Stations

You can store up to 10 FM stations to the memory. This will enable you to access your

favourite stations quickly and easily.

1. To store a preset, you must rst be listening to the station that you would like to save.

2. Press and hold the PRESET button. “Preset Store” will show on the display.

3. Use the

and buttons to select your desired

preset station number and then press the SELECT

button to conrm.

4. The station will be stored and the screen will then show “Preset # Stored“.

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing

the PRESET button.

2. Press the

or button to select your desired preset station number.

3. Press the SELECT button to conrm the selection.

4. If you choose a preset that hasn’t been allocated a station, “Preset Empty“ will be displayed.

LHDR15_IB.indd 20 24/02/2016 08:30

Page is loading ...

Logik LHDR15 User manual

Brand: Logik

Model: LHDR15

Category: Alarm clocks

Type: User manual

Download PDF

report

Logik LHDR15 User manual

Logik LHDR15 User manual

Related papers

Other documents