2. Kinetik
  3. NCT2 Series

Kinetik NCT2 Series Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Kinetik NCT2 Series Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
AG-607
Blood Glucose
Monitoring System
Quick Start Guide
WT1 & WT1/A
Wireless Tens
Pain Reliever
Quick Start Guide
AT100
Bluetooth
Activity Tracker
Quick Start Guide
NCT2
Non-Contact
Thermometer
Exercise caution before using
the thermometer –
check warnings inside the manual.
Unpack thermometer
and
insert batteries.
1
Condition the
thermometer at room
temperature for
30 minutes before using
device for the first time.
2
Open protective cap.
3
Measuring baby’s
forehead temperature:
Simply press
4/A
For measuring surfaces:
First press .
Then
press and hold again,
and finally press SCAN.
4/B
Measuring room temperature:
The device will automatically
enter this mode
after 60 seconds of
being turned on
with no operation.
4/ C
Hold thermometer 1-3cm
from measurement and
press SCAN button.
Scan is complete when
a triple beep is heard.
Reading will be
displayed on screen.
5
Kinetik NCT2 UK QS Guide 20180328
for more information visit :
kinetikwellbeing.com
for more information visit :
kinetikwellbeing.com
for more information visit :
kinetikwellbeing.com
for more information visit :
kinetikwellbeing.com
/