Suzuki HDP Easy Assembly Manual

Brand: Suzuki

Model: HDP

Type: Easy Assembly Manual

IF YOU HAVE ANY QUESTIONS OR PROBLEMS,

CALL THIS TOLL FREE HELP LINE.

STOP!

DO NOT ASSEMBLE YOUR PIANO

BEFORE READING THIS GUIDE!

•

8OO

•

854

•

1594

Easy

Assembly

Guide

The Name You Know

Suzuki Home Digital Piano

ATTENTION!

Use these instructions for Piano Assembly.

D4 D4

D5 D6

1. Un p a c k i n g Yo U r ne w Digital pi a n o

2. at t a c h i n g St a n D le g S t o pe D a l Bo a r D

D. Parts enclosed:

E. Hardware enclosed:

E1. Four (4) 3/4" Machine Screws

E2. Four (4) 1/2" Machine Screws

E3. Two (2) 1/2" Machine Screws

E4. Four (4) 1/2" Wood Screws

E5. Phillips Screw Driver

E6. Bendable Wire Holders

with Screws (Pedal Wire)

E7. Headphone Holder and

Screws

D1. Piano

D2. Pedal Board

D3. Privacy Board

D4. Two (2) Stand Legs

D5. Power Cord

D6. Hardware and Phillips

Screw Driver

A. Carefully unpack the Piano

components and set aside.

IMPORTANT!

Be sure to unpack the Hardware

and Power Supply from the

protective foam pieces.

B. Using 2 people, lift your new

Piano out of the carton and place

on a soft surface such as a carpet

or blanket.

C. Remove the protective outer packing

materials from the Piano.

IMPORTANT!

Use only your hands to remove the protective

materials. Sharp tools may damage the piano.

The finish of your Piano is now exposed.

Take care not to let foreign objects come into

contact with the Piano.

A. Slide the Pedal

Board over the "L"

Bracket on the bottom

of the Stand Leg and

align the holes.

B. Attach the Pedal

Board to the Stand

Legs using four 3/4"

Machine Screws (E1).

"L" Bracket

Pedal Board

(Continued)

3. at t a c h i n g t h e pr i v a c Y Bo a r D

3. at t ac h i n g t h e pr i v a c Y Bo a r D

A. Align the Privacy Board to the backside

of the Leg Stands.

B. Align the holes in the Privacy Board with the Threaded

Holes of the Leg Bracket. Install using two 1/2" Machine Screws

(E3) into the Privacy Board.

IMPORTANT!

Do not tighten them at this time.

C. Align the 4 small holes at the bottom of the Privacy

Board with the holes in the Pedal Board. Install

four 1/2” Wood Screws (E4) prior to tightening them.

IMPORTANT!

Do not over tighten the screws.

4. at t a c h i n g t h e pi a n o

t o t h e St a n D

A. Using two people, lift the Piano onto the Leg Stands

and Pedal Board assembly.

Questions?

Call 1•800•854•1594

4. at t a c h i n g t h e pi a n o t o t h e St a n D

en j o Y Yo U r ne w SU z U k i Digital pi a n o !

The Name You Know

C. Locate the Power Cord

and plug it into the Receptacle

on the bottom of the Piano.

Plug the Power Cord into an

appropriate wall socket.

D. Refer to the Owner’s

Manual for piano operation.

Stand

Positioning

5. co n n e c t i o n S & po w e r

Power

Receptacle

BACK

FRONT

Connection

Jacks

Stand

Positioning

Headphone

Jacks

Holes for Optional

Headphone Clip

A. Piano Bottom Attachments and Connections.

B. Slide the Piano onto the Stand

so the Position Pin is in the Slot of

the Rear Stand Bracket.

C. Align the Bracket Holes

with the Threaded Inserts.

D. Secure the Piano to

the Stand using four 1/2"

Machine Screws (E2).

Rear Stand

Bracket

Piano Bottom

Piano Stand

Position Pin

Bracket

Holes

(continued)

B. Place the piano in its final position then turn the

Pedal Brace Knob down to the firmly touch the floor.

Check and tigthen all screws at this time.

Suzuki HDP Easy Assembly Manual

Suzuki HDP Easy Assembly Manual

Suzuki HDP Easy Assembly Manual

Related papers

Other documents