Creative CB2530 User manual

i

English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Norsk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Polski. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Magyar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

CB2530 Headphones.book Page i Thursday, January 13, 2005 2:55 PM

ii

CB2530 Headphones.book Page ii Thursday, January 13, 2005 2:55 PM

1

English

Creative Digital Wireless

Headphones CB2530

ON/OFF

switch

Bluetooth LED

POWER LED

VOLUME jog dial

Adjustable headband

Battery cap

CB2530 Headphones.book Page 1 Thursday, January 13, 2005 2:55 PM

2

Audio Adapter

ON/OFF button

POWER/Bluetooth

LED

3.5mm

minijack

CB2530 Headphones.book Page 2 Thursday, January 13, 2005 2:55 PM

3

Getting Started

1

Insert batteries in your headphones

1. Lift the battery cap on the left headphone and insert the batteries as shown in Figure 1.

Your Creative Digital Wireless Headphones are supplied with three AAA batteries (two

for headphones and one for audio adapter).

Figure 1

CB2530 Headphones.book Page 3 Thursday, January 13, 2005 2:55 PM

4

2

Insert a battery in your audio adapter

1. Slide the audio adapter cover back and insert the battery as shown in Figure 2.

3

Change the headphone ring (optional)

To remove the ring, push the ring tab down and lift it away from the headphone, as shown

in Figure 3.

Figure 2

Figure 3

CB2530 Headphones.book Page 4 Thursday, January 13, 2005 2:55 PM

5

4

Pair your headphones and audio adapter

1. Connect your audio adapter's 3.5 mm minijack to the headphone jack of your audio

output device, as shown in Figure 4.

2. On your audio adapter, press and hold the ON/OFF button until the POWER/

Bluetooth LED lights up in blue.

3. Switch on your headphones. The POWER LED lights up in red. The Bluetooth LED

lights up in blue.

When the Bluetooth LEDs on your audio adpter and headphones blink, the devices are

paired and connected.

• You can pair the headphones and audio adapter before or after connecting the audio

adapter’s minijack to the headphone jack.

Figure 4

CB2530 Headphones.book Page 5 Thursday, January 13, 2005 2:55 PM

6

4. Keep your headphones within 10 meters of the audio adapter, as shown in Figure 5.

• Make sure that your headphones are within the working distance of the audio

adapter. When the headphones are out of working range, the Bluetooth LED on both

the headphones and the audio adapter remains lit in blue.

• To reconnect the headphones and the audio adapter, bring the two devices closer.

• When battery levels are too low, during the last 10 minutes before your headphones

turn off,

• the POWER LED blinks red.

• your headphones beep every 30 seconds.

• Pairing your headphones with a new device can take up to 15 seconds. Subsequent

pairing with the same device will take significantly less time.

Figure 5

CB2530 Headphones.book Page 6 Thursday, January 13, 2005 2:55 PM

7

Using Your Headphones

1

Adjust the headphone volume

2

Turn off your headphones and adapter

1. Switch off your headphones.

2. On your audio adapter, press and hold the ON/OFF button until the POWER/

Bluetooth LED blinks.

• If the audio adapter is not connected to your headphones for more than two

minutes, the audio adapter automatically turns off.

Figure 6

To increase the

volume, turn the

VOLUME jog

dial toward the

plus + sign.

To d e c rease the

volume, turn the

VOLUME jog dial

toward the

minus – sign.

To mute the

audio, press the

VOLUME jog dial.

CB2530 Headphones.book Page 7 Thursday, January 13, 2005 2:55 PM

8

General Specifications

Bluetooth version

1.2

Bluetooth 2.4 GHz Class 2 Radio, up to a radius of 10 meters

(Varies depending on environment)

Supported Bluetooth profile

Advanced Audio Distribution Profile (A2DP)

Audio adapter weight

20 g (including battery)

Headphone weight

203 g (including batteries)

Battery type

AAA Alkaline or rechargeable

Signal-to-Noise Ratio

>85dB

Play time*

Up to 8 hours

*may vary depending on usage.

CB2530 Headphones.book Page 8 Thursday, January 13, 2005 2:55 PM

9

More Information

Register your product!

Enjoy a host of benefits by registering your product during installation, or at

www.creative.com/register. Benefits include:

• Service and product support from Creative.

• Exclusive updates on promotions and events.

Please note that your warranty rights are not dependent on product registration.

For more information on Creative Customer Support Services and Warranty go to

www.europe.creative.com/support.

Creative Knowledge Base

Resolve and troubleshoot technical queries at Creative's 24-hour self-help

Knowledge Base. Go to www.creative.com and select your region.

notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this document may be

reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording,

Bluetooth is a registered trademark of the Bluetooth SIG, Inc., USA. All other products are trademarks or registered

trademarks of their respective owners and are hereby recognised as such. All specifications are subject to change without

prior notice. Actual contents may differ slightly from those pictured.

CB2530 Headphones.book Page 9 Thursday, January 13, 2005 2:55 PM

10

Safety Information

General Safety

• Do not listen to audio at high volume levels for prolonged periods of time.

Servicing

Do not attempt to service the product on your own. Refer all servicing to your local

Customer Support Services center.

For removable batteries

• The battery must be recycled or disposed of properly. Contact local agencies for

recycling and disposal information.

• Do not allow metal objects to touch the terminals of your battery.

• If there is leakage, an offensive odor, discoloration or deformation during charging or

use, remove the battery and do not use it again. Clean your hands well before touching

food or sensitive areas, for example, your eyes.

Improper handling of your headphones and audio adapter may void the warranty.

For more information on Creative Customer Support Services and Warranty go to

www.europe.creative.com/support

CB2530 Headphones.book Page 10 Thursday, January 13, 2005 2:55 PM

11

Français

Creative Digital Wireless

Headphones CB2530

MARCHE/

ARRET

Bouton

DEL Bluetooth

DEL

ALIMENTATION

Molette du

VOLUME

Serre-tête ajustable

Compartiment

des piles

CB2530 Headphones.book Page 11 Thursday, January 13, 2005 2:55 PM

12

Adaptateur audio

Bouton MARCHE/

ARRET

ALIMENTATION/

Bluetooth

DEL

3,5 mm

mini-prise

CB2530 Headphones.book Page 12 Thursday, January 13, 2005 2:55 PM

13

Démarrage

1

Insérer les piles dans le casque

1. Soulevez le couvercle du compartiment des piles situé du côté gauche du casque et

insérez les piles comme illustré à la Figure 1.

Votre casque Creative Digital Wireless Headphones est livré avec 3 piles AAA (deux

pour le casque et une pour l’adaptateur audio).

Figure 1

CB2530 Headphones.book Page 13 Thursday, January 13, 2005 2:55 PM

14

2

Insertion d’une pile dans l’adaptateur

audio

1. Faites glisser le couvercle de l’adaptateur audio vers l’arrière et insérez les piles comme

illustré à la Figure 2.

3

Changer l’anneau du casque (facultatif)

Pour enlever l’anneau, poussez l’ergot de l’anneau vers le bas et séparez celui-ci du casque,

comme illustré à la Figure 3.

Figure 2

Figure 3

CB2530 Headphones.book Page 14 Thursday, January 13, 2005 2:55 PM

15

4

Connecter le casque à l’adaptateur audio

1. Connectez la mini-prise de 3,5 mm de l’adaptateur audio à la prise casque de votre

périphérique de sortie audio, comme illustré à la Figure 4.

2. Sur l’adaptateur audio, appuyez sur le bouton ON/OFF (MARCHE/ARRET) et

maintenez-le enfoncé jusqu’à ce que la DEL POWER/Bluetooth (ALIMENTATION/

Bluetooth) s’allume en bleu.

3. Mettez votre casque sous tension. La DEL POWER (ALIMENTATION) s’allume en

rouge. La DEL Bluetooth s’allume en bleu.

Lorsque les DEL Bluetooth de l’adaptateur audio et du casque clignotent, les

périphériques sont connectés.

• Vous pouvez connecter le casque et l’adaptateur audio avant ou après la connexion

de la mini-prise de l’adaptateur audio à la prise casque.

Figure 4

CB2530 Headphones.book Page 15 Thursday, January 13, 2005 2:55 PM

16

4. Votre casque doit toujours se trouver à une distance maximum de 10 mètres de

l’adaptateur audio, comme illustré à la Figure 5.

• Assurez-vous que le casque se trouve dans la distance de fonctionnement de

l’adaptateur audio. Lorsque le casque se trouve hors de la portée de fonctionnement,

la LED Bluetooth du casque et de l’adaptateur audio reste allumée en bleu.

• Pour reconnecter le casque et l’adaptateur audio, rapprochez les deux périphériques.

• Lorsque le niveau des piles est trop faible, durant les 10 dernières minutes avant que

votre casque ne se mette hors tension,

• la LED POWER (ALIMENTATION) clignote en rouge ;

• votre casque émet un son toutes les 30 secondes.

• La connexion de votre casque à un autre périphérique peut prendre jusqu’à 15

secondes. Une connexion ultérieure au même périphérique prendra moins de temps.

Figure 5

CB2530 Headphones.book Page 16 Thursday, January 13, 2005 2:55 PM

17

Utilisation de votre casque

1

Régler le volume du casque

2

Mettre le casque et l’adaptateur hors

tension

1. Eteignez votre casque.

2. Sur l’adaptateur audio, appuyez sur le bouton ON/OFF (MARCHE/ARRET) et

maintenez-le enfoncé jusqu’à ce que la DEL POWER/Bluetooth (ALIMENTATION/

Bluetooth) clignote.

• Si l’adaptateur audio n’est pas connecté au casque pendant plus de deux minutes, il

s’éteint automatiquement.

Figure 6

Pour augmenter le

volume, tournez

la molette

VOLUME vers le

signe +.

Pour diminuer le

volume, tournez

la molette

VOLUME vers le

signe -.

Pour couper le son,

appuyez sur la

molette VOLUME.

CB2530 Headphones.book Page 17 Thursday, January 13, 2005 2:55 PM

18

Caractéristiques générales

Version Bluetooth

1.2

Radio classe 2 Bluetooth 2,4 GHz, avec une portée maximum de 10 mètres

Varie en fonction de l’environnement

Profil Bluetooth pris en charge

A2DP (Advanced Audio Distribution Profile, profil de distribution audio avancé)

Poids de l’adaptateur audio

20 g (piles incluses)

Poids du casque

203 g (piles incluses)

Type de piles

Piles AAA alcalines ou rechargeables

Rapport signal/bruit

>85 dB

Durée de lecture*

Jusqu’à 8 heures

*peut varier en fonction de l’utilisation.

CB2530 Headphones.book Page 18 Thursday, January 13, 2005 2:55 PM

Page is loading ...

Creative CB2530 User manual

Creative CB2530 User manual

in other languages

Related papers

Other documents