OUTER UP 90 FLANGE IS OUTSIDE AND
AGAINST BBQ PERIMETER RING AS SHOWN
REAR
BOTTOM
VIEW
ALFRESCO WIND SHIELD
AWS-30, AWS-36, AWS-42 & AWS-5 6
WIND SH I ELD I N STALLATION
Last revised: MARCH 16, 2015
LIFT BBQ FROM ONE SIDE AT A TIME AND PLACE WIND
SHIELD UNDER THE BBQ PERIMETER RING
WIND SHIELD
PIC. 1
WOODEN BLOCK MAY BE USE
TO SUPPORT BBQ
PIC. 2
NOTES:
WOOD BLOCKS MAY BE USE TO ASSIST IN
LIFTING AND SUPPORTING THE BBQ WHILE
PLACING WIND SHIELD UNDER THE BBQ
PERIMETER RING (SEE PIC. 2)
WIND SHIELD USES 90 DEG UP FLANGE’S
ON 3 LOCATIONS TO LOCK UNDER THE BBQ.
(ONLY 2 LOCATIONS FOR THE AWS-30)
OUTER FLANGE’S MUST FIT ON THE OUTSIDE
OF BBQ PERIMETER RING (SEE PIC.4)
INSIDE FLANGE’S MUST FIT ON THE INSIDE
AND UNDER THE BBQ PERIMETER RING
(SEE PIC.3)
UP 90 FLANGE TO FIT OUTSIDE
OF BBQ PERIMETER RING
(SEE PIC 4)
UP 90 FLANGE TO FIT
INSIDE OF BBQ PERIMETER
RING (SEE PIC 3)
PIC. 3
PIC. 4
INSERTING OUTER UP 90
FLANGE INSIDE OF BBQ
PERIMETER RING
BBQ PERIMETER
RING