Panasonic TX32DTX40 Operating instructions

Brand: Panasonic

Model: TX32DTX40

Category: CRT TVs

Type: Operating instructions

TQB8E4062

Operating Instructions

Colour Television with

Integrated Digital Terrestrial Decoder

(U.K. Standard)

TX--32DTX40

Dear Panasonic Customer,

We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction

bookwillallowyou tousethe TV as quickly as possible.Werecommend thatyouthenreadthecomplete instructionbook,andkeep itto

refer to as you explore the range of advanced features that this TV offers.

ThisTVhasalowpowerconsumptionmakingitverycosteffectivetorun.Also,wheninStandbymodethepowerconsumptionis

merely 1,2W. This instruction book is produced using recycled paper.

Analogue and Digital television --- what are they?

Analoguetransmissionisthesystemthathasbeenusedformanyyearsforbroadcastingtelevisionprogrammes.Withcontinuous

improvementsintechnologyitisnow possibletotransmitprogrammesinadigital format, allowing clearerpictures, morestations

and other services to be displayed on screen. Digital television is provided in three different ways; it can be sent along a cable

connection directtoyourhouse, broadcastfroma satellite,orbroadcastusingtraditionalland based(terrestrial) transmitters.The

firsttwo optionsrequire youtohavean extra‘set top box’decoderand in the caseof satellite,a receiving dish mounted outdoors.

Whileallowingyou toreceivetraditionalanaloguetransmissions in theusual way,this televisioncan alsoreceiveterrestrialdigital

services using an integrated (Digital VideoBroadcasting) decoder. This allows you toenjoy the new era of digital terrestrial

television, including interactive services, without the need for a ‘set top box’ or satellite dish --- an adequate roof or loft mounted

antenna is all you need.

Page Page

Warnings and Precautions 3........................

Accessories 4.....................................

Inserting the Remote Control Batteries 4............

Front Panel Controls 4.............................

Remote Control 5.................................

Quick Start Guide 6................................

Using the On Screen Displays 10...................

Aspect Controls 11................................

Multi window 13...................................

Picture Menu 14...................................

Sound Menu 15...................................

Setup Menu 16....................................

Analogue Tuning Menu -- overview 17...............

Analogue Tuning Menu -- Programme edit 18.........

DVB Auto setup 20................................

Analogue Auto setup 20............................

Analogue Tuning Menu -- Manual Tuning 21..........

Shipping condition 21.............................

Analogue Tuning Menu -- Owner I.D. 22..............

Manual tuning --- Front Panel Controls 23............

DVB S ystem Setup 24.............................

Common Interface Module Menu 25.................

Favourites Setup Menu 26..........................

Information Banner 26.............................

System Update Menu 27...........................

System Update Notification 27......................

DVB Timer Programming Menu 28..................

TV Guide 30......................................

Q-- Link 31........................................

VCR / DVD Recorder Installation 32.................

Teletext Operation 33..............................

Audio / Video (AV) Connections 36..................

Fro nt connections 36................................

Socket Information 36................................

Rear connections 37.................................

Troubleshooting 38................................

Foryourguidance 40..............................

Specifications 40..................................

WELCOME

CONTENTS

Example 2

Example 1

D This TV set is designed to operate on 220-- 240V, 50Hz A.C.

D Topreventdamagewhichmightresultinelectricshockorfire,

donotexposethisTVsettorainorexcessivemoisture.ThisTV

must not be exposed to dripping or splashing water and

objectsfilledwithliquid,suchas vases,must notbe placedon

top of or above the TV.

D WARNING : HIGH VOLTAGE !!!

Donotremovetherearcoveraslivepartsareaccessiblewhen

it is removed. There are no user serviceable parts inside.

D TV Games / Home Computers

Extended use of TV games or home computers with any

television setcan causea permanent‘shadow’on thescreen.

This type of irreversible picture tube damage, can be limited

by observing the following points:

D Reduce the brightness and contrast levels to a minimum

viewing level.

D Donotoperatethetelevisionsetforacontinuousperiodof

time while using TV games or home computers.

D This type of picture tube damage, is not an operating

defect, and as such is not covered by the Panasonic

warranty.

D Ensurethatthemainsplugiseasilyaccessibleatalltimes.The

On/Off switch on this model does not fully disconnect the TV

from the mains supply. Remove the mains plug from the wall

socket when the TV set is not used for a prolonged period of

time.

Note:

D If the set is not switched off when the TV station stops

transmitting, it will automatically go to standby mode after

30minutes.This functionwillnotoperatewhen the TV isin

AV mode.

D Cabinet and picture tube care

Removethemainsplugfromthewallsocket.Thecabinetand

picture tube can be cleaned with a soft cloth moistened with

mild detergent and water. Do not use solutions containing

benzol or petroleum. TV sets can produce static electricity,

care must be taken whenever touching the TV screen.

D Adequateventilationis essentialto preventfailure ofelectrical

components,werecommend that a gap ofat least 5cm is left

allaroundthistelevisionreceivereven whenit isplacedinside

a cabinet or between shelves. Ventilation should not be

impededbycoveringtheventilationopeningswith itemssuch

as newspapers, table---cloths and curtains

D AvoidexposingtheTV settodirectsunlightandothersources

ofheat.Topreventfireneverplaceanytypeofcandleornaked

flame on top or near the TV set.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREF ULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the

fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362.

Check for the ASTA mark

ASA

or the BSI mark on the body of the fuse.

If thefittedplug hasaremovablefusecoveryou mustensurethatitisrefittedwhenthefuseis

replaced. If you lose the fuse cover the plug must not be used until a replacement cover is

obtained.Replacementfuse coverscanbe purchasedthroughyourlocalPanasonicdealer.

Theplug fitted to thisappliance incorporates a mainsfilter circuit. If this is removedor

replaced with a non-- filtered plug this television will no longer meet the European

standards for Electromagnetic Compatibility (EMC). If thefitted p lug is unsuitablefor

the socket outlet in your home an appropriate adapter should be used.

Nonetheless,ifthefittedplugis replaced,the fuseshould b e takenoutand thecut-- off

plug disposed of safely. There is danger of severe electrical shockif the cut off plug is

inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.

If in any doubt please consult a qualified electrician.

Howtoreplacethefuse(forplugtypeshowninexample1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit

securely into the mains plug (see example 1).

Howtoreplacethefuse(forplugtypeshowninexample2):

Lift open thefuse compartment,in the mains plug, with a screwdriver, andreplace the fuse,

then press the fuse cover down securely (see example 2).

IMPORTANT

:-- The wires in the mains lead of this appliance are coloured in accordance with the following code :--

BLUE : NEUTRAL BROWN : LIVE

Asthecoloursofthewiresinthemainsleadofthisappliancemaynotcorrespondtothemarkingsidentifyingtheterminalsinyourplug,

proceed as follo ws :--

1. The BLUE

wire must be connected to the terminal marked ‘N’ or col oured black.

2. The BROWN

wire must be connected to the terminal marked ‘L’ or coloured red.

IMPORTANT NOTE

: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug,

marked with the letter ‘E’ or the earth symbol.

WARNINGS AND PRECAUTIONS

Batteries,packagingand oldequipmentshould

not be disposed of as domestic waste, but in

accordance with the applicable regulations.

Remote Control Transmitter

EUR7636010

Batteries for the Remote Control

Transmitter. (2 x R6 (UM3) size)

Check that you have the accessories and items show n

Operating Instruction book

TQB8E4062

TV Guarantee

CRT Guarantee

VS --- 32PXM

(Video cabinet)

Whilst squeezing the recessed catch, lift the

battery cover away from the remote control

Insert batteries ---note co rrect

polarity (+ and --- )

Replace the battery cover

Notes:

D Make sure that the batteries are fitted the correct way round.

D Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

D Do not mix different battery types, i.e. Alkaline and Manganese. Do not use rechargeable (Ni-- Cad) batteries.

Press here and open flap to expose TV controls, front AV3 and headphone terminals

MAINS Power On/Off switch.

STR (Normalisation store)

Used to store tuning and othe r function settings.

F (Function select)

Displays the On Screen Display functions, press

repeatedly to select from the available functions ---

Volume, Contrast, Brightness, Colour, Sharpness,

Tint (in NTSC mode), Bass, Treble, Balance, Tuning

mode (only when viewing analogue transmissions)

and Geomagnetic Correction.

--- /V +/

Increases or decreases the programme

position by one. When a function i s

displayed, press to increase or decrease

the selected function.

TV/AV select

(see page 9).

Headphone socket

(see page 36).

RCA Audio/Video sockets

(see page 36).

S --- VHS socket

(see page 36).

Indicator LED’s

Red indicates Standby mode.

Orange indicates DVB system

active for recording or DVB

tuner lock on.

ACCESSORIES

INSERTING THE REMOTE CONTROL BATTERIES

FRONT PANEL CONTROLS

Aspect control button (see page 11).

TV/AV --- Switch between viewing TV or AV input (see page 9).

Standby On/Off switch

Switches TV On or Off standby. Switches DVB system on or off standby if tuner lock is not set.

Numeric Keys used for:--- Programme / channel change ; Teletext page

selection (see page 33); When in Standby mode, switches TV on.

Menu --- Press to access the Picture, Sound and Setup menus (see page 10).

Mute --- Sound mute On/Off.

Direct channel access During analogue TV viewing or when in the Tuning

menu, press and then enter channel number using the numeric buttons.

TV / Text button (see page 33).

Multi function buttons --- red, green, yellow and blue. Used for the selection, navigation and

operation of various functions.

N(Normalise)button will recall stored settings.

Cursor buttons to make selections and adjustments.

Mode --- Switch between viewing DVB and Analogue modes.

Dolby Virtual on/off.

Direct TV Record button (see page 31).

Guide ---DisplaystheDVBTVGuide(seepage30).

Exit the menu system.

OK button to confirm selections and choices. Press after selecting

programme positions 1---99 (0---9 in Analogue mode) to avoid delay.

STTL --- Displays subtitles (if available).

i --- Shows status information for the current Programme position (see page 26).

Index --- Selects the nearest teletext index page (see page 33).

Volume increase/decrease(seepage10).

Channel number up and down, teletext page selection (see page 10).

Throughout this book, buttons relevant to the operations described will be as shown in the following example:---

Open the Main menu (1)

Move to Setup menu (2)

Access Setup menu (3)

Hold --- Freezes the current teletext page (see page 33) Stills the picture, press again

to return to watching the current programme

MULT I WINDOW button (see page 13)

Standby --- Press to switch the VCR, DVD or DVD Recorder to standby mode. Press

again to switch back on.

Play --- Press to playback the tape or DVD.

VCR / DVD switch --- Use this switch to select whether controls

operate DVD equipment or your VCR.

Record --- Press this button to start recording.

Programme Up / Down --- Press to increase or decrease the programme position by one.

Skip/FastForward/Cue

VCR: Press to fast forward the tape. In Play mode, press to view the picture rapidly forward (Cue).

DVD: Press once to skip to the next track. In play mode press and hold to view the picture rapidly

forward.

Skip / Rewind / Review

VCR: Press to rewind the tape. In Play mode, press to view the picture rapidly in reverse (Review).

DVD: Press once to skip to the previous track. In play mode press and hold to view the picture

rapidly in reverse.

Stop --- Press to stop the tape or DVD.

Pause / Still --- Press in playback mode, the picture will pause. Press again to restart play.

The Remote Control is capable of operating some functions of selected Panasonic

VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have

different functions, so to ensure compatibility please refer to the equipment’s instruction

book or consult your dealer for details.

(1) (2) (3)

(Standby On / O ff)

(Cursor buttons)

(Status

)

(Multi function buttons)

(Channel) (Volume)(Mute)

(Dolby Virtual)

(Skip)

(Stop) (Pause / Still) (Play)

(Standby)

REMOTE CONTROL

Connection and setting up options

Note:-- Please ensure that the unit is not connected to the mains before any leads are attached or removed.

Mains

Socket

RF Connection

D Connect the RF cable into the TV Aerial socket ( ).

Connection of TV using an RF cable only

Aerial

Input

socket

Scart Connectio ns

D The VCR / DVD Recorder can also be connected to the TV using a Scartcable, if you are using a Scart equipped VCR

/DVDRecorder.

D Use the TV’s AV2 Scart socket for any VCR. Always use a “fully wired” Scart cable.

D Use the TV’s AV1 or AV4 Scart socket for any DVD Reco rder. Always use a “fully wired” Scart cable.

RF Connection

D ConnecttheRF cabletothe“AerialIn”soc ketoftheVCR/DVDRecorderandan RFcablefromtheVCR/ DVDRecorder

AerialOutsockettotheTVAerialsocket( ).

Notes :

Ifusinga

“Q-- Link”

VCR /DVD Recorder, thenthe AV1ScartoftheVCR/DVDRecordermustbe connected totheAV2socket

oftheTV.IfyourVCRorDVDRecorderisnota

“Q-- Link”

device,pleaseconsulttheoperatinginstructionbookforthatproduct.

Further information on Q-- Link can be found on page 31.

Connection of TV and VCR or DVD Recorder using Scart and RF cables

VCR / DVD Recorder

Mains

Socket

Aerial

Output

socket

Aerial

Input

socket

Aerial

Input

socket

AV2 Scart socket

DVDR

VCR

Notes:

D A Satellite Receiver can be connect ed to any available Scart socket. If all sockets are in use, please refer to your VCR or DVD

Recorder operating instruction manual for further connection o ptions.

D Additional equipment and cables are not supplied.

D Further details of audio/ video connections can be found on pages 36 and 37.

D Further information for VCR or DVD Recorder installation with this TV can be found on page 32.

QUICK START GUIDE

Programmes will appear immediately if your dealer

has programmed the TV for you.

If the TV has not been programmed for you then

Auto setup will begin.

First, the TV will search for analogue stations:

Ensure that the VCR or DVD Recorder is in

Standby mode.

Plug the TV into mains socket and switch ON.

When the search for analogue stations is complete, the

TV will continue to search for DVB stations.

TV stations will be located, sorted into order and stored

ready for use.

D DVB Stations: Are sorted by their logical channel number

D Analogue Stations: Are sorted into channel order.

Stations are sorted into the following order:

The sorted programme order depends upon the TV signal, the

broadcasting system, and reception conditions.

Mains

Socket

TV to VCR or DVD Recorder Download

If a “Q-- Link”, “

NEXT VIEWLINK”

or compatible recording device

has been connected to a Scart socket before starting Step 1,

programme information will be downloaded to that device.

Onlytheanalogueprogrammepositionswillbedownloadedto

the recording device, in the correct order. See page 31.

Not all VCRs / DVD Recorders support this download of

programme information, some may require to be started

manually.

Refer to the recording device’s operating instruction book.

If a recording device other than those described above has

been connected, then there will be no download operation, the

TV is now ready for use.

Notes :

If the recording device has not accepted download data from the TV, you may need to select the Download option from the device’s

menu system.

Refer to the recording device’s operating instruction book.

If Q-- Link is not operating correctly, check the following :

D The Scart cable is connected to the TV’s Scart socket.

D The Scart cable is connected to the recording device’s compatible (Q-- Link,

NEXT V IEWLINK

or similar technology) Scart socket.

D The Scart cable is a “fully wired” type.

For further information on Q-- Link and connecting equipment, see pages 31, 36 and 37.

QUICK START GUIDE

(9)(6)

(8)

To view a list of the stations that have been found, press the

GUIDE button (5) on the remote control (see page 30).

Use the cursor buttons (6) to move the cursor bar up and down

the list. Use the programme change button (7) to step through

the guide page by page.

To view the selected programme press the OK button (8).

Categories

To make stations easier to find, specific stations can be listed by

category; press the left or right cursor button (9) to choose a category.

The chosen category name is shown on screen.

For example, if you select ‘Free TV’, only ‘free --- to --- air’ stations will be

listed --- you can view any of these now.

If you select ‘Pay TV’, only subscription stations will be listed --- you

will need to contact the service provider to find out how to subscribe to

these stations.

A separate guide is available when viewing analogue mode. In this

guide, use the cursor buttons (6 & 9) to move the cursor bar around

the list, use the programme change button (7) to step through the

guidepagebypage.PresstheOK button (8) to view the selected

programme.

Both guides can be cleared from the screen using the EXIT button

(10).

(5)

(10)

Owner ID

As an added feature, this TV has the option of adding a

security code (Owner ID) and personal details into its memory,

so that in the unfortunate event of theft it will help the Police to

trace the owner.

Using the numeric buttons, 0 to 9 on your

remote control (1), enter required 4 digit

Owner ID PIN NUMBER.

(2) (3) (4)

(1)

Enter NAME, HOUSE NUMBER and POSTCODE.

If a 4 digit PIN NUMBER was entered above, you will be taken

automatically to the NAME line.

If not, using the left or right cursor buttons (2) move to the NAME line.

Change character using the up or down cursor buttons (3).

Select the character position using the left or right cursor buttons (2).

Repeat above until NAME, HOUSE NUMBER and POSTCODE are

entered.

Press the OK button (4) to store the details.

Press the OK button (4) again, when you are asked “Are you sure ?”.

For further information on Owner I.D., see page 22.

A space is provided on page 22 to write down the PIN

NUMBER for future reference.

(7)

QUICK START GUIDE

Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the

screen (colour purity). The Geomagnetic Correction feature can be used to eliminate them, if necessary:

First, ensure the Auto setup and Q---Link download procedures are complete.

The screen should not be showing any On---Screen Display menus.

Open the flap on the television’s front panel.

Press and release here to open flap

Press the F button (1) repeatedly until the Geomagnetic Correction feature is displayed .

Press the + or --- buttons (2) or (3) repeatedly until the picture appears to be level.

Press the F button (1) again to return to normal viewing.

Close the flap to prevent damage.

You are now ready to begin viewing programmes.

To switch between analogue and DVB modes , press the Mode button (4).

To switch to AV mode, press the TV/AV button (5).

-- /v

(1) (2) (3)

Press the Red (6), Green (7), Yellow (8) or blue (9) multi function button (whilst the

options remain on screen) to choose which AV source to view. Should the options

disappear, press any multi function button (6), (7), (8) or (9) to restore them.

Press the TV/AV button (5) to exit from AV mode.

The AV Select menu will allow you to choose which AV source to view. AV select menu

(5) (6) (7) (8)(4) (9)

AdjustthevolumeusingtheVolume button (10).

Change programme positions using the Channel button (11).

(11)(10)

QUICK START GUIDE

1010

This TV has a comprehensive system of On Sc reen Display (OSD) menus to access

adjustments and options

Some selections, for example, Contrast, Brightness, Colour and Sharpness

will allow you to increase or decrease their level.

Some selections, for example, Off timer, allow a change of setting to be made.

Some selections, for example Tuning menu, will lead to a further menu.

The up and down CURSOR buttons (2) are used to move the cursor up and down the

PICTURE, SOUND and SET UP menus.

The left and right CURSOR (3) or OK (4) buttons are used to access the menus.

The OK button (4) is used to store settings after adjustments have been

made or options have been set, in the DVB Setup menu for example.

The EXIT button (5) is used to exit the menu system and return to the

normal viewing screen.

Menu Title

The up and down CURSOR buttons (4) are used to move the cursor up

and down the menus.

The left and rightCURSOR buttons (5) are used to access menus,adjust

levels or to select from a range of options.

Selection bar

Sub-- menus

Indicator for options

ON SCREEN HELP

’Instructions’ box

The Help box is not

showninthemenu

pictures in this

instruction book due to

space limitations.

(1)

(2) (3) (4)

(5)

Press the Menu button (1) to access the Main menu

USING THE ON SCREEN DISPLAYS

The widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect,

including widescreen ‘cinema format’ pictures.

Press the ASPECT button (1) repeatedly to move through the

seven aspect options: Panasonic Auto, 16:9, 14:9, 4:3, Zoom1,

Zoom2 and Zoom3.

Pressthe ASPECTbutton (1)thenusetheRed (2)orGreen(3)

buttons to move in either direction through the seven aspect

options.

(1)

(2)

(3)

Panasonic Auto

PanasonicAutodeterminesthebestaspectratiotousetofillyour

screen. It does this using a four step process to determine if the

picture being viewed is a widescreen picture.

IfPanasonic Autodetectsawidescreensignalitswitches intothe

appropriate 16:9 or 14:9 widescreen mode. If Panasonic Auto

does not detect a widescreen signal then this advanced TV set

enhances the picture for optimum viewing pleasure.

The text shown on the screen indicates how Panasonic Auto

determined which ratio to use:

’WIDE’ appears in the top left of the screen if a widescreen

identification signal (WSS) is found or a signal found through a

Scartsocket.PanasonicAutoswitchestotheappropriate16:9or

14:9 widescreen ratio. This function will also work in any

aspect mode.

’Panasonic Auto’ appears in the top left of the screen if black

stripes above and below the picture are detected. Panasonic

Auto chooses the best ratio and expands the picture to fill the

screen.Thisprocesscan take severalminutes,depending onthe

darkness of the picture.

Notes:

D If, in Panasonic Auto mode, you experience

problems with the screen display size when

playing back widescreen for mat recordings from

your VCR then it is possible that the tracking

control of your VCR requires adjustment (your

VCR instruction book will contain adjustment

details).

D The widescreen aspectratiosofdifferent films and

programmes can vary. If these are wider than a

standard 16:9 aspect picture then a black band

may bevisibleatthe top and bottomof thescreen.

ASPECT CONTROLS

’Panasonic Auto’ appears

in the top left of the screen,

The best ratio is chosen

and the picture expanded

to fill the screen.

’WIDE’ appears in the top

left of the screen,

Panasonic Auto switches

to the appropriate 16:9 or

14:9 widescreen ratio.

WIDE

Panasonic Auto

Press the ASPEC T button,

then use the RED or

GREEN buttons to move

in either direction through

the seven aspect options.

1212

ASPECT CONTROLS

16:9

14:9

4:3

16:9 will display a true

16:9 (anamorphic)picture

withnoaspectdistortions.

14:9 will display a 14:9

letterbox or 4:3 picture with

no aspect distortions.

4:3 will display a 4:3

picture at its standard 4:3

size with no aspect

distortions.

Zoom1

Zoom1 will display 16:9

letterbox or 4:3 pictures

withnoaspectdistortions.

Zoom2

Zoom2 will display 16:9

anamorphic letterbox

pictures as a full screen

display with no aspect

distortions.

Zoom3

Zoom 3 will display 21:9 letterbox

pictures as a full screen display

withno aspectdistortions16:9will

displaythepictureatitsmaximum

sizebutwithslightstretching.

PresstheMULTIWINDOWbutton(1),repeatedly, whilsttheonscreenselectorkeysareonscreen,tomove

between thepicture and picture feature,picture in picturefeature orpicture out of picture (4:3aspect

mode only) and normal viewing.

The on screen selector keys (corresponding to the four coloured buttons on the remote control (2))that

appear for the features clear after a few seconds. If you want to select an operation when the keys are not

shown, press the MULTI WINDOW button (1) once more and the keys will reappear.

Picture and picture

Allowstwopicturestobeviewedatthesametime.Pressthegreenbutton(2)toselectthe

contentsoftherightwindow,switchingbetweendisplayinga DVBTVchannel,Analogue

TV channel and all AV sources in turn.

Press the yellow button (2) to swap the contents of the two windows.

Whist the on screen selector keys are shown, use the remote control to select a TV

channel to appear in the right window. When the on screen selector keys are not

displayed, use the remote control to select a TV channel to appear in the left window.

Press the blue button (2) to return to normal viewing.

Allows two pictures to be viewed at the same time.

Presstheredbutton(2)tochangethelocationofthe

smaller window.

Press the green button (2) to select the contents of

thesmallerwindow, switchingbetweendisplayinga

DVB TV channel, Analogue TV channel and all AV

sources in turn.

Press the yellow button (2) to swap the contents of

the two windows.

Whist the on screen selector keys are shown, use

the remote control to select a TV channel to appear

in the smaller window. When the on screen selector

keys are not displayed, use the remote control to

select a TV channel to appear in the main window.

Press the blue button (2) to return to normal

viewing.

Picture out of picture (4:3 aspect mode only)

This feature allows two programmes to be viewed at the same time, as picture in picture

does. The difference is how the two programmes are displayed: in picture in picture the

smaller window appears within the main image; in picture out of picture the smaller

window appears to the right of the main image.

Press the green button(2) to select the contentsof the smallerwindow, switchingbetween

displaying a DVB TV channel, Analogue TV channel and all AV sources in turn.

Press the yellow button (2) to swap the contents of the two windows.

Whist the on screen selectorkeys are shown, use theremote controlto selecta TV channel

to appear in the smaller window. When the on screen selector keys are not displayed, use

the remote control to select a TV channel to appear in the main window.

Press the blue button (2)toreturntonormalviewing.

Picture and text (analogue only)

Press the TEXT button (3), followed by the MULTI

WINDOW button (1) to move between viewing

teletext and the picture and text feature. Picture

and text lets you see the current programme and a

page of teletext side by side.

Whilst using this feature, the remote contro l affects

theteletextpage; if youwishtomakechangestothe

programme viewed press the TEXT button (3) to

return to watching the programme on its own then

make the desired changes.

MULTI WINDOW

Picture out of picture mode

Thetwoprogrammeshavebeen

swapped, the p rogramme in the

smaller window has become the

main window programme. Also, the

location of the smaller window has

been changed.

Picture and picture mode

Picture in picture mode

TELETEXT mode

Picture and text mode

(1) (2) (3)

Picture in picture

1414

Using the Menu button (1),opentheMain Menu.

Access the Picture menu.

Move to your choice (2).

Increase or decrease levels or set options (3).

Press the EXIT button (4) to exit the Picture menu.

(Depending upon your signal source, some options may

not be available).

(1) (2) (3) (4)

The Viewing mode menu allows you to

select three different screen settings ---

Dynamic, Normal and Cinema.

In eachViewing mode setting, Contrast,

Brightness, Tint (in NTSC only), Colour,

Sharpness and Colour balance can be

adjusted to suit your particular viewing

requirement (for example, you may

require different settings for viewing

sport, films, news etc.)

Changes will be stored automatically.

By analysing and processing the

incoming picture, all three modes

feature automatic enhancement.

The Contrast, Brightness, Colour and

Sharpnesslevelscanbeadjustedtosuit

your own preferences.

The Tint adjustment will only appear as

a menuitem ifyou havean NTSCsignal

source connected to the TV and will

allow adjustment of the hue.

TheColourbalancesettingallowsyou

to se t the ov e ral l colour ton e of the

picture.

P-- NR will automatically reduce

unwanted picture noise.

PICTURE MENU

Contrast

Tint

Colour

Brightness

Sharpness

Colour balance

P-- NR

Viewing mode

Using the Menu button (1),opentheMain Menu.

Access the Sound menu.

Move to your choice (2).

Increase or decrease levels or set options (3).

Press the EXIT button (4) to exit the Sound menu.

(1) (2) (3)

(4)

(5)

Bass adjustment will emphasise the

lower, deeper frequencies and can be

increased or decreased.

Treble adjustment will emphasise the

sharper, higher frequencies and can be

increased or decreased.

Balance affects the levels of sound

between the left and right speakers.

Adjustment can be made so that the

level from the speakers will suit your

listening position.

The headphone volume can be

adjusted independently of the TV

speakers so that everyone can enjoy

listening at their own comfort level.

(Not available with DVB progr ammes).

Select On to provide stereo sound

reproduction. Select Off for FM Mono

sound output.

If Nicam Mono is being transmitted

select either FM Mono (Off), Nicam

Mono I (M1) or Nicam Mono II (M2).

The options depend upon the signal

being transmitted.

If reception deteriorates it is advisable

to switch to FM Mono (Off).

Multi audio, which will only appear

when a DVB programme is selected,

allows you to select an alternative

sound track. The number of options

available depends on each broadcast.

The sound can be improved during

Music or Speech modeby selecting the

appropriate function.

Dolby Virtual uses two speakers to

simulate the surround effect produced

by a multichannel system. Dolby Virtual

feature works with Dolby encoded

signal only. Dolby Virtual can also be

controlled using the Dolby Virtual

button (5) on your remote control.

SOUND MENU

Bass

Treble

NICAM

Balance

Mode

Multi audio

...

Dolby virtual

Headphone

volume

1616

The Setup menu provides access to various advanced features and also to the Tuning menu

Using the Menu button (1),opentheMain Menu.

Access the Setup menu.

Move to your choice (2).

Increase or decrease levels, set options or access further

menus (3).

Press the EXIT button (4) to exit the Setup menu.

(1) (2) (3)

(4)

TheDVBTimer programmingmenuallowsyoutoenter

programme times at which the DVB tuner must switch

on, ready for recording .See page 28.

DVB tuner lock prevents you from accidentally

changing programme position while recording a DVB

broadcast.IftheTVisswitchedintostandbymodewhile

DVB tuner lockison, the DVB tunerwillremainactiveto

ensure recording can still take place.

DVB Auto Setup allows you to clear all current digital

tuning data, and scan for new services. See page 20.

DVB System Setup provides access to various

specialised DVB options. See page 24.

ThisTV continuallyscansforupdatedDVBservic esand

notifies you of any changes. Set to ON to receive

notification.SettoOFF ifyoudonotwishtobeinformed

of any updates.

Allows you to clear all tuning information and reset all

control levels back to factory settings. See page 21.

You may wish to lock a DVB programme channel to

prevent access to it. Set to ON to lock the current

programme position. Set to OFF to unlock.

When a programme position is locked, Direct Channel

Access using the ’C’ and numeric keys on the remote

control is not available.

AV2outoffersyouachoiceofsignalstosendtotheAV2SCARTsocket. Youcanchoosefromthesignalscurrently

tuned on the Analogue or DVB tuners, or Monitor --- the picture displayed on screen.

The Teletext option allows you to choose between F ASTEXT or LIST mode. See page 33.

OfftimerwillswitchtheTV offwithin a presettimewhichyoucanchoosefrom between0to90minutesin 15minute

intervals.

Volume correction(in AV mode only) allowsyoutoadjust the volumelevelofeachAVinputtocompensateforany

differences in audio levels from external equipment.

The Tuning menu provides an entry to many other analogue feat ures including Programme edit and Autosetup.

Seepage17.

Letsyoucontrol anypicture movement.SettoON tocorrectminorpicturemovement.SettoOFF tohave noflicker

reduction at all.

Controls what you see when you switch the TV set on. Set to TV to view picture from your TV tuner.

Set to AV to view input from any live equipment attached to a scart socket on your TV (eg. set top box, digital

converter box etc.)

Not e: ---

The external equipment must be switched on and transmitting a signal for auto matic switching to occur

If you notice a slight tilt to the picture or if there are coloured patches at the corners of the screen, use this feature

toeliminatethem.SeeStep6,page9(QuickStartGuide).

SETUP MENU

SetupmenuinAnalogueMode

SetupmenuinDVBMode

SetupmenuinAVMode

Off timer

Teletext

Volume correction

DVBtunerlock

DVB

Timer Programming

DVB System Setup

Analogue

Tuning M enu

DVB Auto Setup

New Service

Message

Shipping condition

Child Lock

AV2 out

Flicker reduc tion

Geomagnetic

Power on

Preference

In Analogue mode

Using the Menu button (1),opentheMain Menu.

Access the Setup menu.

Move to Tuning menu (2).

Access Tuning menu (3).

Move to your choice (2).

Access further menus (3).

Press the EXIT button to exit (4).

(1) (2) (3)

(4)

Accessingthe Programmeedit menu will allow stations to be moved, added,

deleted, named or locked.

Seepage18.

Auto setup allows you to clear all current analogue tuning data, and scan for

newservices.Seepage20.

Allows individual programme positions to be tuned manually. See page 21.

Allows you to clear all tuning information and reset all control levels back to

factory settings. See page 21.

Allows you to enter a security code and address information. See page 22.

ANALOGUE TUNING MENU -- overview

Manual tuning

Programme edit

Shipping Condition

Owner ID

Auto setup

1818

The Programme edit menu allows you to edit the analogue programme position settings

Using the Menu button (1),opentheMain Menu.

Access the Setup menu.

Move to Tuning menu (2).

Access Tuning menu (3).

Move to Programme edit menu (2).

Access Programme edit menu (3).

Make required changes (see sections below).

Press OK button (4) to store changes.

If you have finished in the Programme edit menu, press the EXIT

button (5) to return to normal viewing.

(1) (2) (3) (4) (5)

To delete an unwanted programme position

Ensure that the cursor is in the Prog. Column.

Choose the programme position (2).

Press the Red button (7) on remote control.

Press the Red button (7) again to confirm.

If you have finished in the Programme edit menu, press the EXIT

button (5) to return to normal viewing.

(7)

To add a programme position

Choose the programme position where the new programme is to

be inserted (2).

Press the Green button (8).

Press the Green button (8) again to confirm.

The blank programme can then be tuned (see page 21), named

(see page 19) or locked (see page 19).

Press the OK button (4) to store the programme position.

Press the Setup button (1) to return to the Programme edit menu.

If you have finished in the Programme edit menu, press the EXIT

button (5) to return to normal viewing.

(8)

ANALOGUE TUNING MENU -- PROGRAMME EDIT

To move a programme to another position

Choose the programme position to be moved (1).

Press the Yellow button (2) on remote control.

Choose the new position (1).

Press the Yellow button (2) again to confirm.

Press the OK button (3) to store your changes.

If you have finished in the Programme edit menu, press the EXIT

button (4) to return to normal viewing.

(1) (2) (3) (4)

To rename a programme position

Choose the programme position (1).

Move to the Name column (5).

Choose the new character (1).

Move to the next character position (5).

Continue until renaming is done.

Press OK to store (3).

If you have finished in the Programme edit menu, press the EXIT

button (4) to return to normal viewing.

(5)

To lock a programme position to prevent

access

Choose the programme position (1).

Move to the Lock column (5).

Select either On or Off (1).

Press the OK button (3) to store.

If you have finished in the Programme edit menu, press the EXIT

button (4) to return to normal viewing.

To copy programme information to a

compatible recording device

Ensure that the cursor is in the Prog. Column.

Press the Blue button (6) on the remote control.

Programme data will now be sent to the recording device(s). This might take a while, depending on the number of stations stored.

If the message “Feature not available” appears on the screen, the television is unable to send programme information to the

recording device(s). See the device’s handboo k for further information.

If you have finished in the Programme edit menu, press the EXIT button (5) to return to normal viewing.

(6)

ANALOGUE TUNING MENU -- PROGRAMME EDIT

2020

(1) (2) (3) (4)

DVB MODE

Using the Menu button (1),opentheMain Menu.

Access the Setup menu.

Move to DVB Auto Setup (2).

Access DVB Auto Setup (3).

Press OK to start DVB Auto Setup (4).

The TV will search for, locate and sort into order your local stations. If a compatible recording device is

connected via the AV sockets, programme data will be sent to the device via Q-- Link (see page 31).

Once this operation is completed, the TV will display programme position 1.

(1) (2) (3) (4)

ANAL OGUE MODE

Using the Menu button (1),opentheMain Menu.

Access the Setup menu.

Move to Tuning menu (2).

Access Tuning menu (3).

Move to Auto setup (2).

Access Auto setup (3).

Press OK to start Auto setup (4).

The TV will search for, locate and sort into order your local stations. If a compatible recording device is

connected via the AV sockets, programme data will be sent to the device via Q-- Link (see page 31).

Once this operation is completed, the TV will display programme position 1.

DVB AUTO SETUP

ANALOGUE AUTO SETUP

Page is loading ...

Panasonic TX32DTX40 Operating instructions

Brand: Panasonic

Model: TX32DTX40

Category: CRT TVs

Type: Operating instructions

Download PDF

report

Panasonic TX32DTX40 Operating instructions

Panasonic TX32DTX40 Operating instructions

Related papers

Other documents