Whirlpool SW8 AM2C XWR Daily Reference Guide

Brand: Whirlpool

Model: SW8 AM2C XWR

Type: Daily Reference Guide

Whirlpool SW8 AM2C XWR is a feature-packed refrigerator designed to keep your food fresh and organized. Its 6th Sense Fresh Control automatically adjusts the temperature and humidity levels to maintain optimal conditions for food preservation. The Fast Cool function quickly chills food and drinks, while the Vacation mode helps save energy when you're away. The built-in water dispenser provides easy access to fresh, filtered water, and the adjustable shelves and door bins allow for flexible storage options.

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting the

appliance to the power supply.

Connect the appliance to the power supply and turn the thermostat

knob to switch on the appliance.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available).

CONTROL PANEL

1. On/standby

2. Temperature display

3. Fast cool button

4. Alarm indicator

5. Temperature button

6. 6th sense fresh control

3.2.6.

ON/STANDBY

To put the product in Stand-by, press and hold the button

for 3

seconds. All the icons turn o except On/Standby indicator

. To

reactivate the appliance press once (briey) this button. (seethe

Instructions for Use)

FAST COOL BUTTON

Using Fast Cool function it is possible to increase the cooling

capacity in the refrigerator compartment. The use of this function

is recommended when placing a very high quantity of food in the

refrigerator compartment. Press the Fast Cool button

to activate

Fast Cool function. When activated, the Fast Cool indicator turns on.

The function is automatically disabled after 6 hours, or can be manually

disabled by pressing Fast Cool button

again.

STOP ALARM BUTTON

Press in case of alarm to mute the acoustic alarm.

TEMPERATURE BUTTON

Press the temperature button

to change the temperature: thevalue

changes cyclically between 8°C ad 2°C.

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

6TH SENSE FRESH CONTROL

This function automatically works to ensure the optimal conditions to

preserve the stored food. To deactivate the “6thSense Fresh Control”,

press and hold Fast Cool

and Stop Alarm buttons at the same

time for 3seconds until an audible signal sounds and “6th Sense Fresh

Control” icon

turns o as conrmation that the feature has been

deactivated. To reactivate this function repeat the same procedure.

Note: Deactivation of the function switch-o the FAN in the fridge.

FAN

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food. By default, the fan is

switched on. To switch o the FAN press and hold Fast Cool

and

Stop alarm

buttons at the same time for 3 seconds until an audible

signal sounds and “6

Sense Fresh Control” icon will turn o as

conrmation that the fan has been switched o. To switch on the FAN

repeat the same procedure. As a conrmation audible signal sounds

and the icon turns on.

Note: Reasons why switch o the fan look for “ENERGY-SAVING TIPS” in the

Instructions for Use.

VACATION BUTTON

This function can be activated to reduce the energy consumption of

the appliance during a prolonged period of time.

Before activating the feature, all perishable food should be removed

from the refrigeration compartment and make sure that the door

is closed properly, since the refrigerator will maintain asuitable

temperature to prevent the formation of unpleasant odors (+12°C). To

activate/ deactivate press the Vacation mode button for 3 seconds.

When the function is enabled, the related symbol will light up

and the temperature of the refrigerator compartment will be set

to a higher setpoint (thetemperature display will show the new

temperature setpoint of +12°C). Changing the temperature setpoint

will automatically deactivate the function.

HOW TO STORE FOOD AND BEVERAGE

Legend

FREEZER ZONE

TEMPERATE ZONE

Suggested for the storage of tropical fruit, cans, drinks,

eggs, sauces, pickles, butter, jam

COOL ZONE

Suggested for the storage of cheese, milk, daily food,

delicatessen, yogurt

COOLEST ZONE

Suggested for the storage of cold cuts, desserts, sh and

meat

FRUIT & VEGETABLE DRAWER

UTILISATION AND MAINTENANCE OF THE WATER DISPENCER AND FILTER

WATER DISPENSER

FIRST USE

The rst time you use the water dispenser or after a long period left

not used wash the tank and the lter with water. The water dispenser

provides fresh, ltered water, without the need of opening the

refrigerator door. This will reduce the number of times the door is

opened, thus also reducing energy consumption of the product.

FITTING AND REPLACING THE ACTIVE CARBON FILTER

The water lter should be removed from the foil bag (found in the

crisper drawer (item 7). Follow the instructions provided with the lter.

Important: If the lter is left dry for an extended period of time, its

performance may be reduced. Immerse the lter in water for a few

seconds to reinstate optimum performance.

PROCEDURE TO CLEAN THE STOP FROST ACCESSOR

To ll the tank, rotate the cap in the direction ofthe arrow.

1. Water tank (g. 1)

The water tank is made of antibacterial material. This prevents

and reduces the proliferation of bacteria. An internal container,

with an active carbon ltered ensures water ltration. To ll the

tank: rotate the water inlet towards you and ll with water, using

a jug or other suitable container. Once the tank is full, close the

water inlet by moving it back to its original position. Always

use drinking water only: any other liquid may impair product

performance.

Tank

Fig. 1

Obtaining ltered water (g. 2)

After lling the tank, the water may not be immediately available.

This is because the ltering process may require a few minutes

(depending on the amount of water in the tank).

To dispense water: with the refrigerator door closed, press the

water dispenser tab with the glass. If for safety reason water

delivery must be prevented, simply press the stop at the back of

the tab. To release water delivery, move the stop back to its

original position. It is recommended to drink the supplied water

from the dispenser in 6 hours.

Activation

device

Stop

Water drip tray

Fig. 2

Cleaning the water tank (g. 3-4-5-6-7-8)

Periodically clean the water tank with running water. Twice a year

it is recommended to keep healthy the unit using specic products

based on diluted chlorine that not modify the material properties

and rinse with current water.

To clean the tank, proceed as follows:

(g. 3) release and remove the water tank by lifting it and pulling

towards you. Place the tank on a at surface, remove and wash the

top cover.

Note: the tank must be retted in its position as soon as possible, to

prevent the refrigerator from overheating.

Fig. 3

(g. 4) remove the internal container and the lter, and wash them

separately. When washing the lter, only use clean water (no

detergent or sharp tools). To clean the disk lter, rst remove it

from the container.

Fig. 4

5. (g. 5) for a more thorough cleaning, remove the valve cap (the

tting connecting the tank to the refrigerator) by rotating it

anticlockwise. Cleanthe cap. Important: do not pull on the valve

body (g. 6).

Fig. 5 Fig. 6

(g. 7) replace the valve cap by rotating clockwise.

Fig. 7

7. (g. 8) t the tank back in place by placing it between the lateral

guides of the door and pushing it in position, ensuring that the

valve is back in its original seat. Check that the there are no gaps

between the rubber seal of the tank and the door.

Fig. 8

WATER FILTER DURATION

To ensure optimum performance you should change the water lter

according with the following table:

Water consumption (average) Filter duration

3,0 l/day 4 months

4,5 l/day 3 months

6,0 l/day 2 months

Filter replacement is not covered by product warranty. To order more

water lter cartridges, please contact your after-sales service.

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The appliance doesn’t work. There may be an appliance power

supply problem.

Make sure:

• there is not a power failure;

• the plug is properly inserted in the power socket and the double-

pole switch (if present) is in the correct position (on);

• the household electrical system protection devices function;

• the power cable is not broken;

The inside light does not

work.

It may be necessary to replace the light

bulb.

Disconnect the appliance from the power supply and contact the

Technical Assistance Service if you need a replacement.

The internal temperature

of the compartments is not

cold enough.

The reasons could vary (see “Solution”)

column.

Check that:

• the doors are closed properly;

• the appliance is not installed near a heat source;

• the temperature is appropriately set;

• the circulation of air through the ventilation grilles on the base of

the appliance is not obstructed.

There is water on the

bottom of the refrigerator

compartment.

The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and

Maintenance").

The front edge of the

appliance that the door

gaskets seal against is hot.

This is not a problem. It prevents

condensation from forming.

A solution is not needed.

The temperature of the

refrigerator compartment is

too cold.

• The set temperature is too cold. • Try to set a less cold temperature.

• Turn o the fan (if present) described in the paragraph “FAN”.

19515372400

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website docs . whirlpool . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication

plate.

Whirlpool SW8 AM2C XWR Daily Reference Guide

Whirlpool SW8 AM2C XWR Daily Reference Guide

Whirlpool SW8 AM2C XWR Daily Reference Guide

Related papers

Other documents