2. LIGHT MY BRICKS
  3. 10305

LIGHT MY BRICKS 10305 Operating instructions

  • Hello! I've reviewed the Installation Guide for the Light My Bricks Light Kit 10305. This guide provides detailed instructions for installing LED lights on your LEGO Lion Knights’ Castle set, including connecting various lights, expansion boards, and cables. I'm ready to assist you with any questions you have about the installation process or troubleshooting.
  • What is included in the package?
    How do I connect the cable connectors to the expansion boards?
    What should I do if a light is not working?
LEGO LION KNIGHTS’ CASTLE #10305
LIGHT KIT
INSTALLATION GUIDE
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO THE LION KNIGHTS’ CASTLE 10305
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
The Lion Knights’ Castle 10305 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
1 x White 30cm Bit Light
2 x Yellow 30cm Bit Light
2 x Blue 30cm Bit Light
13 x Orange 30cm Bit Light *
3 x Warm White 30cm Large Bit Light
9 x Orange 30cm Large Bit Light *
2 x 2-Port Expansion Board
9 x 6-Port Expansion Board *
4 x Flicker Eects Board
• 30 x Round Plate 1x1 w/ Open Stud - Black *
• 1 x Candle Flame
• 2 x Round Plate 1x1 - Trans Orange
• 4 x Round Plate 2x2 w/ Rounded Bottom - Trans Clear
• 4 x Tile 1x1 W Clip Round Edges - Black
• 4 x Plate 1x1 Mod Rounded w Handle - Black
• 1 x Plate 1x2 MW Stud Jumper - Black
• 1 x Round Plate 1x1 - Trans Blue
6 x 5cm Connecting Cable
1 x 15cm Connecting Cable
3 x 30cm Connecting Cable
5 x 50cm Connecting Cable *
1 x USB Power Cable
14 x Adhesive Squares
* Indicates components which include spares
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
72
73
78
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
BLUEPRINT
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
2
Black Round Plate 1x1
w/ Open Stud
Orange 30cm Large Bit Light
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
3
Black 1x1 Plate Modified Plate
Rounded w/ Handle
Black 1x1 Tile w/ Clip
Rounded Edges
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
4
Black Round Plate 1x1
w/ Open Stud
Orange 30cm Large Bit Light Black Round Plate 1x1
w/ Open Stud
Thread both of
the cables through
the Open Stud
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5
6-Port Expansion Board
Orange 30cm Large Bit Light Plate 2x2 W Rounded Bottom -
Trans Clear
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6
Warm White 30cm Large Bit Light
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
7
30cm Connecting Cable
2-Port Expansion Board
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8
Adhesive Square
Black Round Plate 1x1
w/ Open Stud
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Push the cables
up to the ceiling so
they are not visible
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
96-Port Expansion Board
15cm Connecting Cable
50cm Connecting Cable
LEGO Lion Knights’ Castle 10305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
Thread the 50cm
Connecting Cable
from the previous
step through the
Round Plate 1x1 w/
Open Stud - Black
Ensure to only lift
up the plate as much
as shown. Lifting too
far will cause the
Large Orange Bit
Light you installed
previously to come
loose.
Black Round Plate 1x1
w/ Open Stud
/