Place base frame (C) on top of Legs (B) and align the holes. Insert large allen screw (H-2) and
tighten it with Allen Key (T1) until fully secured.Repeat the step tp secure all connections. Please
ensure all connections are fully tighten. Turn the piece in upright position. Product is ready to use.
Place table top (A) upside down on a non-marring padded surface. Align Leg (B) onto table
top (A) as shown in the diagram. Insert small allen screw (H-1) into aligned holes of leg (B)
and table top (A). Tighten small allen screw (H-1) with allen key (T-1). Repeat the process
to secure all connections and other leg (B).