Lolly & Me Ellery Assembly & Instruction Manual

Please follow contact instructions on page

Ellery

Changing Table

Adaptable as Your Child Grows Up

Assembly Instruction Manual

Questions? Call Us at 1-800-515-4056

Website: www.lollyandme.com

Adult assembly required due to the presence of small parts, sharp points & sharp edges.

Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference.

Our goal is to improve the assembly process for the customer. If you have any questions during assembly or you are missing parts, please contact us

directly. Do not return product parts to the retailer before contacting our customer service department for assistance.

10

2

Congratulations on Your Purchase!

Thank you for choosing a Lolly & Me product. Don’t worry

about the assembly. Inside you will ﬁnd understandable step-

by-step instructions with clear illustrations—it’ll be a piece of

cake! If you get stuck, ring us up at 1-800-515-4056. Need a

replacement part or is a part missing? Just call us and we’ll get

one sent off to you right away.

Remember to complete your product registration card and

mail it in to activate your product’s one year limited warranty.

You can also go online to www.lollyandme.com and complete

it there. Then—and this is the good part— you will be regis-

tered in our quarterly drawing for prizes that will look great

in your little one’s nursery!

Sincerely, Lolly & Me

Questions? Call Us at 1-800-515-4056

Website: www.lollyandme.com

Email: customerser[email protected]

Always secure this pad to the changing surface by restraint harness. See

To make it easier to bulid your changer have a friend help during the assembly.

To prevent death or serious injury, always keep child within arm’s reach.

Assemble on soft surface to prevent damage to the product finish.

Ensure that all parts and components are located before beginning assembly.

Changing Table Warnings

Read all instructions before use of changing table.

Before each usage or assembly, inspect unit for damaged hardware, loose joints, loose bolts

and other fasteners, missing parts, or sharp edges. DO NOT use unit if any parts are missing

or broken. Ask your dealer or call

LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,

# 0-379 Minnetonka, MN 55343

Periodically check all bolts and screws to maintain the stability of your changing table.

Be sure to use furniture wall straps to help reduce the risk of tip-over.

Use of tip-over restranits may only reduce, but not eliminate, the risk of tip-over.

Never allow children to climb or hang on drawers, doors, or shelves.

instruction for more details.

LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over

DO NOT overload drawer

3

Assemble on soft surface to prevent damage

to the product finish.

Need a friend to help during assembly.

Ensure that all parts and components are located before beginning assembly.

Each of these added steps and helpful hints should make the process easier.We would like

you to implement these into your assembly guides.If there are other steps or hints that you

are currently using that make the experience easier please continue those in combination

with these suggestion.

•

• We would like these steps to be implemented into your products for modular and promotions.

These can be running changes to your current g uides.Once the steps have been added to your

instruction guides we would like to have copies

of all your guides sent to us for reference.

Our goal is to improve the assembly process for

the customer.

# 0-379 Minnetonka, MN 55343

LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,

Fall Hazard - use of the product without this may result in death or serious injury to your child from falling.

Never open more than one drawer at a time.

4

Instructions for Assembly

Ellery

Changing Table

Adaptable as Your Child Grows Up

OK

Let’s Put This Baby

Together!

5

6

Wall Strap Kit (x1)

s T

U

7

6*20 Short Wood Dowel (*12)

M6x3 8mm Bolt (x14 )

M6x3 2mm Bolt (x6 )

M6x10 mm Bolt (x8 )

8

66*66*3mm Tray Bracket (*2)

8*30 Wood Dowel (*2)

8*25mm Drawer Screw (*30)

M4*25mm Drawer Knob Screw (*6)

M6*25MM Bolt (*8)

M6x10 mm Bolt (x8 )

STOP

IF YOU EXPERIENCE ANY

ISSUES WITH THIS PRODUCT

BEFORE YOU

RETURN THIS TO

THE RETAILER

PLEASE FOLLOW THE

PROCEDURES LISTED ON

THE FOLLOWING PAGE

9

REPRESENTATIVE.

O THE CRIB ITSEL

PRODUCT ASSITANCE PROCEDURES

IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASE

CONTACT US DIRECTLY.

PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS:

FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA E-mail:[email protected]

phone us at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343

PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR E-mail.

1. YOUR NAME

2. ADDRESS

3. BEST DAY TIME PHONE NUMBER

4. PLACE AT DATE OF PURCHASE

5. MODEL NUMBER, NAME AND COLOR OF YOUR PRODUCT

6. MANUFACTURER’S CODE (THE MANUFACTURER’S CODE CAN BE FOUND ON A LABEL

AFIXED TO THE BOX AS WELL AS A LABEL AFIXED T F.)

7. SHORT DESCRIPTION OF THE ISSUES AND ATTACH PHOTOS IF POSSIBLE.

PLEASE INCLUDE SPECIFIC PART NUMBERS IN QUESTION FOR MORE EFFICIENT SERVICE.

SOMEONE WILL CONTACT YOU VIA E-mail OR PHONE TO HELP YOU WITH YOUR ISSUES.

IF YOU DO NOT HAVE INTERNET ACCESS, PLEASE FAX THE ABOVE INFORMATION TO :

612-573-6678

IF YOU DO NOT HAVE INTERNET OR FAX ACCESS, PLEASE CAL US AT 1-800-515-4056 AND BE

SURE TO HAVE ALL THE ABOVE INFORMATION TO GIVE TO THE CUSTOMER SERVICE

10

WE ARE HERE FOR YOU!

8*25MM Drawer Screw (*4)

6*25mm Short Wood Dowel (*4)

11

12

13

14

15

16

M6x3 8mm Bolt (x3 )

17

M6x3 8mm Bolt ( x 4 )

18

M6x3 8mm Bolt (x7)

19

M6x3 2mm Bolt (x6)

20

*2

Page is loading ...

Lolly & Me Ellery Assembly & Instruction Manual

Lolly & Me Ellery Assembly & Instruction Manual

Related papers

Other documents