Grizzly G0694 Owner's manual

Brand: Grizzly

Model: G0694

Category: Lathes

Type: Owner's manual

Grizzly G0694 is a 20" x 43" heavy-duty variable-speed wood lathe. It is powered by a 3 HP, 3-phase induction motor that provides a variable speed range of 50-1725 RPM. The lathe has a swing over bed of 20 inches, a swing over tool rest base of 16-1/4 inches, a distance between centers of 43 inches, and a swing over gap of 24-7/8 inches. The lathe comes with a 13-3/4 inch wide outboard tool rest, an indexed spindle every 15 degrees, a 3-step pulley system, a reversible variable speed motor control, and a quick release belt tension lever for quick speed range changes.

The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2

Model G0694

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0694 20" X 43" HEAVY‐DUTY VARIABLE‐SPEED

WOOD LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 578 lbs.

Width (side-to-side) x Depth (front-to-back) x Height................................................................... 103 x 25 x 49-1/2 in.

Footprint (Length x Width)..................................................................................................................... 77 x 16-1/2 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 814 lbs.

Length x Width x Height....................................................................................................................... 26 x 84 x 56 in.

Electrical:

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating..................................................................................................................................... 19.6A

Minimum Circuit Size..............................................................................................................................................20A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length.................................................................................................................................................6 ft.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included........................................................................................................................................................... No

Recommended Plug Type..................................................................................................................................... 6-20

Switch Type.................................................................................................................... Push Button ON/OFF Switch

Inverter (VFD) Type.................................................................................................................................. Delta VFD-E

Inverter (VFD) Size............................................................................................................................................... 3 HP

Motors:

Main

Horsepower................................................................................................................................................ 3 HP

Phase.................................................................................................................................................... 3-Phase

Amps.............................................................................................................................................................. 9A

Speed........................................................................................................................................... 50-1725 RPM

Type...........................................................................................................................................TEFC Induction

Bearings........................................................................................................ Sealed & Permanently Lubricated

Centrifugal Switch/Contacts Type................................................................................................................ N/A

Main Specifications:

Operation Information

Swing Over Bed......................................................................................................................................... 20 in.

Swing Over Tool Rest Base................................................................................................................ 16-1/4 in.

Distance Between Centers........................................................................................................................ 43 in.

Swing Over Gap.................................................................................................................................. 24-7/8 in.

Max. Distance Tool Rest to Spindle Center................................................................................................. 8 in.

No of Spindle Speeds............................................................................................................................Variable

Spindle Speed Range..............................................................................................................100 – 3000 RPM

Floor to Center Height............................................................................................................................... 45 in.

The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2

Model G0694

Spindle Information

Spindle Taper............................................................................................................................................ MT#2

Spindle Thread Size..................................................................................................................... 1-1/4" x 8 TPI

Spindle Thread Direction.................................................................................................................. Right Hand

Type of Included Spindle Center.................................................................................................................Spur

Outboard Spindle Thread Direction.................................................................................................. Right Hand

Outboard Spindle Size...........................................................................................................................1-1/4 in.

Outboard Spindle TPI................................................................................................................................ 8 TPI

Tool Rest Information

Tool Rest Width............................................................................................................................... 13-13/16 in.

Tool Rest Post Diameter....................................................................................................................... 1-1/4 in.

Tool Rest Post Length........................................................................................................................... 5-1/8 in.

Tool Rest Base Height.........................................................................................................................2-1/16 in.

Tailstock Information

Tailstock Taper.......................................................................................................................................... MT#2

Type of Included Tailstock Center............................................................................................................... Live

Construction

Bed..........................................................................................................................Precision-Ground Cast Iron

Stand...................................................................................................................................... Pre-Formed Steel

Headstock............................................................................................................................................ Cast Iron

Tailstock............................................................................................................................................... Cast Iron

Paint Type/Finish....................................................................................................................................Enamel

Features:

Single-Phase Inverter for 3-Phase Variable Speed Motor

Included Spur & Live Centers

13-3/4 in. Wide Outboard Tool Rest

Indexed Spindle Every 15 Degrees

3-Step Pulley System

Reversible Variable Speed Motor Control

Quick Release Belt Tension Lever for Quick Speed Range Changes