2. ROOMS TO GO
  3. 35428071

ROOMS TO GO 35428071, 35428083, 35428095 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the CANYON FURNITURE COMPANY Trundle Bed 28-744. This document provides step-by-step instructions on how to assemble the bed, including attaching the panels, slats and dividers used for storage. I'm ready to answer any questions you may have about the assembly process or the features of this product.
  • What should I do before starting the assembly?
    How do I attach the side panels?
    What should I do if I am using the bed as storage?
CANYON FURNITURE COMPANY
FIG.1 FRONT PANEL (1 PCS) FIG.7 DIVIDRES (2 PCS)
FIG.2 LEFT SIDE (1 PCS)
FIG.3 RIGHT SIDE (1 PCS)
HARDWARE PACK (HPK00147-0)
FIG.4 BACK PANEL (1 PCS) FIG.8 PLASTIC PLATES (2 PCS)
FIG.5 RIGHT SLAT PACK (1 PCS) FIG.9 1 1/4" SCREWS (6 PCS)
FIG.6 LEFT SLAT PACK (1 PCS)
35428019 28B-744 TRUNDLE BED BAY BLACK
35428021 28J-744 TRUNDLE BED WHISPER GRAY
35428069 28G-744 TRUNDLE BED ARMY GREEN
35428057 28R-744 TRUNDLE BED BRICKYARD
35428083 28T-744 TRUNDLE BED TURQUOISE
35428110 28Y-744 TRUNDLE BED SUNGLOW YELLOW
35428033 28N-744 TRUNDLE BED NAVY
35428045 28E-744 TRUNDLE BED CHOCOLATE EXPRESSO
35428071 28A-744 TRUNDLE BED PETAL PINK
35428095 28L-744 TRUNDLE BED LAVENDER
1.- BEFORE YOU START, CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT AND HARDWARE TO MAKE SURE YOU HAVE
EVERYTHING YOU NEED FOR ASSEMBLY, CHECK ON
THE BOTTOM OF THE FRAME COMPONENTS FIG 1, 2, 3 & 4, THEY SHOULD HAVE MATCHING NUMBERS (FRONT XXXX, BACK XXXX, LEFT XXXX, RIGHT XXXX).
2.- REMOVE SCREWS IN BOTH PANEL SIDES (FIG.2 & 3), USING A PHILLIP HEAD SCREWDRIVER (NOT INCLUDED) SAVE THE SCREWS FOR RE-ATTACH
SEE FIG.7
3.- ALIGN HARDWARE INSTALLED IN THE FRONT PANEL (FIG.1) WITH LEFT SIDE (FIG.2), THEN ATTACH USING THE SCREWS REMOVED IN PREVIOUS STEP
SEE FIG. 8
, REPEAT
THE SAME PROCESS IN THE RIGHT SIDE (FIG.3) AND AT ALL FOUR CORNERS,
SEE FIG.9
4.- PLACE THE LEFT SLAT PACK (FIG.6) INSIDE THE BED, THEN SLIDE TOWARD CENTER
SEE FIG.10
, REPEAT THE SAME PROCESS WITH THE RIGHT SLAT PACK (FIG.5).
5.- IF USING AS STORAGE, SLIDE DIVIDERS (FIG.7) INTO THE SLOTS IN THE FRONT & BACK PANELS.
SEE FIG.11
6.- SLIDE TRUNDLE UNDER THE BED.
TRUNDLE BED ASSEMBLY INSTRUCTIONS (28-744)
COTTAGE COLORS COLLECTION
35428007 28W-744 TRUNDLE BED WILLOW WHITE
LIST OF CONTENTS
Identify and count all Hardware and compare with the Hardware List Below. Please contact your retail store with service or parts replacement request.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come loose inside the carton during shipment.
KEEP THE INSTRUCTION
SHEET FOR FUTURE
REFERENCES
TO ASSEMBLE THIS TRUNDLE BED
REQUIRES TWO PERSONS
WARNING: PLEASE MAKE SURE YOU
HAND THREAD FIRST AND THEN FINISH
WITH A SCREWDRIVER
FIG.7
FIG.8
FIG.9
FIG.3
FIG.4
FIG.6
FIG.7FIG.2
FIG.5
LEFT SIDE
RIGHT SIDE
BACK PANEL
FIG.1
FRONT PANEL
FIG.8
FIG.9
REV 03 19/02/2020 PAGE 1 OF 1 KIS01182-0
/