WAC Lighting JTK-HID303N-70E Installation guide

Brand: WAC Lighting

Model: JTK-HID303N-70E

Type: Installation guide

This manual is also suitable for

JTK-HID303N-20E

WAC Lighting JTK-HID303N-70E is a versatile track fixture compatible with WAC J” & “J2” track systems. It can also be used with other manufacturers' tracks (consult factory for compatibility). This fixture is designed for use with T4 metal halide G8.5 base lamps of 70W only. It features adjustable vertical and horizontal aiming with push lock buttons to secure settings. The fixture can be easily installed on the track by inserting the adapter into the track slot, rotating it 90°, and pushing up the locking tab. Removal is the reverse procedure.

WAC Lighting JTK-HID303N-70E is a versatile track fixture compatible with WAC J” & “J2” track systems. It can also be used with other manufacturers' tracks (consult factory for compatibility). This fixture is designed for use with T4 metal halide G8.5 base lamps of 70W only. It features adjustable vertical and horizontal aiming with push lock buttons to secure settings. The fixture can be easily installed on the track by inserting the adapter into the track slot, rotating it 90°, and pushing up the locking tab. Removal is the reverse procedure.

Installation Instructions: Metal Halide Track Fixture – LARC Series

Models: JTK-HID303S-20E JTK-HID303N-20E & JTK-HID303F-20E

JTK-HID303S-39E JTK-HID303N-39E & JTK-HID303F-39E

JTK-HID303S-70E JTK-HID303N-70E & JTK-HID303F-70E

CAUTION:

For Use with WAC J” & “J2” track systems. Fixture may also be used on other manufacturers brand of track

(consult factory for compatibility).

CAUTION – To reduce the risk of a burn during relamping, remove from the track before relamping.

Read all instructions before installing.

Installing on Track:

1. Note the track has a groove running its length to indicate polarity.

2. Insert adapter into track slot and rotate it 90° the embossed arrow on the

adapter should point to the grooved side of the track.

3. Push up and turn the locking tab into the lock position.

4. Removal is the reverse procedure. Tracks may be positioned anywhere

along the track length.

5. Vertical and horizontal aiming have push lock buttons to secure settings.

Adapter

Embossed arrow

Rotation lock

Locking tab

Aiming lock

2

3

Re-Lamping:

1. Use appropriate protection when handling hot lamps.

2. Turn power off at main switch.

3. Turn lens cap counterclockwise to remove.

4. Grasp lamp with a clean cloth and pull straight out to remove.

5. For JTK-HID303S-20E and JTK-HID303N-20E and JTK-HID303F-20E

Use T4 metal halide G8.5 base lamps 20W only.

For JTK-HID303S-39E and JTK-HID303N-39E and JTKHID303F-39E

Use T4 metal halide G8.5 base lamps 39W only.

For JTK-HID303S-70E,and JTK-HID303N-70E and JTK-HID303F-70E

Use T4 metal halide G8.5 base lamps 70W only.

6. Installation is the reverse procedure.

Note: Metal halide lamps require several minutes of operation to reach full

brightness. If power is interrupted lamps will take several minutes to re-

strike. This is a normal characteristic of metal halide lamps.

Rotation lock

Retain these instructions for future service and adjustments

615 South Street, Garden City, NY 11530

Tel: (516) 515-5000 Fax (516) 515-5050

www.waclighting.com

1

WAC Lighting JTK-HID303N-70E Installation guide

Brand: WAC Lighting

Model: JTK-HID303N-70E

Type: Installation guide

This manual is also suitable for

JTK-HID303N-20E

WAC Lighting JTK-HID303N-70E is a versatile track fixture compatible with WAC J” & “J2” track systems. It can also be used with other manufacturers' tracks (consult factory for compatibility). This fixture is designed for use with T4 metal halide G8.5 base lamps of 70W only. It features adjustable vertical and horizontal aiming with push lock buttons to secure settings. The fixture can be easily installed on the track by inserting the adapter into the track slot, rotating it 90°, and pushing up the locking tab. Removal is the reverse procedure.

Download PDF

Related papers

Other documents