2. Outwell
  3. Richmond Kitchen Table

Outwell Richmond Kitchen Table Operating instructions

  • Hello! I've reviewed the assembling instructions for the Outwell RICHMOND kitchen table. This document covers how to set up the table including unfolding, securing the frame, attaching panels, shelves, support poles, wind shield and even a wash basin frame. I'm ready to answer any questions you may have about these instructions and about RICHMOND kitchen table.
  • How to start assembling the Kitchen Table?
    What is the purpose of hook and loop straps?
    How to attach the wind shield?
1 2
6 8
Provided in storage bag. Easy to
carry and easy to store
Take out the kitchen table from
the storage bag and fold out the
kitchen table
3Turn the kitchen table up-side
down and tighten the hook and
loop straps around the frame
for stability
SAFE LOCK
4Check that the hook and loop
straps are placed correctly and
that the
safe lock on each side is
secured
5Assemble the aluminium panels
on top of the table. The holes
on each side of the frame
corresponds with the panel
fasteners
Slide the shelves into the unit.
Metal table top ts down
between the aluminium panels.
The two-piece table top is
secured in each end of the
table top
Assemble the wind shield on top
of the table in the slots. Open
the top table and assemble the
wash basin frame. The basin
frame can be covered by the
table top
RICHMOND KITCHEN TABLE W/MAGNETIC DOORS · ASSEMBLING INSTRUCTIONS
7Insert two poles horizontal and
one pole vertical. The thin pole
must be curved and attached at
top and bottom pocket
© 09/2021 Oase Outdoors Outwell® is a reg. Trademark of Oase Outdoors. EU: Kornvej 9, DK-7323 Give, UK: One Glass Wharf, Bristol, BS2 0ZX
/