Wolf DD30R User manual

Category
Deep fryers
Type
User manual

This manual is also suitable for

3
0" Downdraft Ventilation System
The cooktop downdraft unit rises from
the countertop to whisk away odors and
smoke into the easy-to-clean, five-layer
mesh filter. Model DD30I includes an
internal blower. In-line and remote blower
options are available for model DD30R.
FEATURES
Remote-mounted control module.
Internal, in-line and remote blower options.
Three-speed blower control.
Filter clean timer lets you know when the
filter needs cleaning.
Delay-off feature automatically turns unit
off after five minutes, chimney remains up.
Stainless steel filter cover with
dishwasher-safe aluminum mesh filter.
LED indicators.
Downdraft control kit, included with the
unit—includes control module, top cover,
mounting brackets, RJ45 connector and
mounting hardware.
ACCESSORIES
In-line and remote blowers for model
DD30R (refer to chart above).
Bracket supports for installation of two
integrated modules with downdraft.
SRT/Downdraft trim kit for use with
sealed burner rangetop model SRT304.
Transitions in various sizes.
Accessories are available through your authorized
Wolf dealer. For local dealer information, visit the
find a showroom section of our website,
wolfappliance.com.
IMPORTANT NOTE: Wolf downdraft systems
can be used with all Wolf induction, electric
and gas cooktops, except unframed models.
Wolf downdraft systems cannot be used
with the steamer or fryer module and are not
recommended for use with the electric grill
module.
A pro ventilation hood is recommended for
use with Wolf dual fuel ranges, gas ranges,
sealed burner rangetops and gas rangetops.
The 30" downdraft can be used with sealed
burner rangetop model SRT304.
Control module.
Model DD30
MODEL OPTIONS DD30I DD30R
Includes 500 CFM Internal Blower
Requires In-Line or Remote Blower
M
odel DD30 shown. Also shown is model IM15/S
multi-function cooktop and model CT15G/S gas cooktop.
BLOWER OPTIONS
INTERNAL IN-LINE REMOTE
CFM 500 600 900 1200 600 1100 600 900 1200 1500
DD30R ••
INSTALLATION NOTES
Model DD30 can be used with sealed burner
rangetop model SRT304. An accessory trim
kit is necessary for this installation. Contact
your authorized Wolf dealer for details.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/8".
SPECIFICATIONS
Overall Width 30"
Overall Height (above countertop) 9
1
/16"
Overall Depth 2
3
/8"
Duct Size Model DD30I 3
1
/4" x 10"
Model DD30R 3
1
/4" x 14"
Discharge Adjustable
Minimum Flat Countertop Depth* 25
1
/8"
Downdraft Cut-Out Width 27"
Downdraft Cut-Out Depth 2
3
/4"
Electrical Requirements 110/120 V AC
60 Hz, 15 amp circuit
Power Cord** 2
1
/2' cord with grounded plug
Shipping Weight 75 lbs
*Depth of countertop increases for installation
with the sealed burner rangetop. Refer to
installation instructions provided with the
SRT/Downdraft trim kit.
**The specific location of the outlet is not critical,
as long as it is within reach of the power cord
that is located mid-way, top and bottom, on the
right side of the downdraft. Certain installations
may require that the electrical supply be placed
in an adjacent cabinet.
INSTALLATION SPECIFICATIONS
Installation with Cooktop Installation with Sealed Burner Rangetop
OVERALL DIMENSIONS
30" Downdraft Ventilation System
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
3
/8"
(60)
3
0"
(762)
9
1
/1
6
"
(230)
26
1
/4"
(
667)
1
1
/2" (
38)
DEPTH OF CHIMNEY
25
1
/8" (638) min
FLAT COUNTERTOP
7
11
/16
" (197)
24"min (610)
CABINET DEPTH
2
1
/2
" (64) min
EDGE OF
COOKTOP
TO WALL
7
1
/8
"
(181)
2
1
/2
" (64) min
2
3
/4
" (70)
COOKTOP CUT-OUT
WIDTH
19
1
/4
"
(489)
27" (686), 33" (838) OR 42" (1067)
DOWNDRAFT CUT-OUT
25
1
/8
"
(638) min
FLAT
COUNTERTOP
3" (76) min
TO CONTROL
MODULE
COUNTERTOP CUT-OUT (TOP VIEW)
29
5
/16
"
(745)
30" (
762) rec
FLAT COUNTERTOP
29
5
/16
"
(745)
7
1
/2
"
(191)
27
1
/4" (692) min
CABINET DEPTH
7
1
/8
"
(181)
27" (686) OR 33" (838)
D
OWNDRAFT CUT-OUT
2
3
/
4
" (
70)
30" (762) OR 36" (914)
WIDTH OF RANGETOP
30" (762) rec
FLAT
COUNTERTOP
24"
(610) min*
COUNTERTOP CUT-OUT (TOP VIEW)
3" (76) min
T
O CONTROL
M
ODULE
19" (483)
PLATFORM DEPTH
2
1
/2
" (64) min
E
DGE OF
R
ANGETOP
TO WALL
*Additional depth may be required if rangetop is to be installed flush with cabinet face.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 1/10
  • Page 1 1
  • Page 2 2

Wolf DD30R User manual

Category
Deep fryers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI