Gianni Industries GPS-3A User manual

Category
Power supply units
Type
User manual

This manual is also suitable for

Gianni Industries GPS-3A is a 2 AMP DC power supply with a compact wall-mounted steel fabricated case and a lift-off hinged front panel. In the event of a mains power failure, standby power is automatically provided from battery charging output. The model consists of a simple output and a built-in adjustable timer module for application of door relocking on fail-safe (power to lock) or fail-secure (power to unlock) locking devices. Other features include:

  • Adjustable timer module: 1-30 seconds
  • Filtered & regulated DC output
  • Short circuit protection
  • Build-in backup battery charger for uninterruptible power supply

Gianni Industries GPS-3A is a 2 AMP DC power supply with a compact wall-mounted steel fabricated case and a lift-off hinged front panel. In the event of a mains power failure, standby power is automatically provided from battery charging output. The model consists of a simple output and a built-in adjustable timer module for application of door relocking on fail-safe (power to lock) or fail-secure (power to unlock) locking devices. Other features include:

  • Adjustable timer module: 1-30 seconds
  • Filtered & regulated DC output
  • Short circuit protection
  • Build-in backup battery charger for uninterruptible power supply
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GPS Ver. C Published on 2008.05.16
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Speci
Gianni power supplies are housed in a robust, compact wall
mounted steel fabricated case with lift-off hinged front panel.
In the event of a mains power failure, standby power is
automatically provided from battery charging output. The
models are consisted a simple output and a built-in adjustable
timer module for application of door relocking on
fail safe ( Power to lock) or fail secure (power to unlock)
locking devices.
(PSU-200)
GPS-3A
PSU-200
PSU-100
PSU-100
*2 AMP DC power supplies
*Box Size : 225(H)*244(W)*86(D)mm
*Specify Out put: 8~16V DC
*Specify Input:120Vac(or 230V AC)
*Filtered & regulated DC output
*Short Circuit protection
*Build-in backup battery Charger for Uninterruptible
*LED indicates power supply status
*2 AMP DC power supplies
*Box Size : 210(H)*220(W)*80(D)mm
Adjustable Timer module: 1~30 seconds
*Specify Out put: 8~16V DC
*Specify Input:120Vac(or 230V AC)
*Filtered & regulated DC output
*Short Circuit protection
*Build-in backup battery Charger for Uninterruptible
*UL Listed for US and Canada
*2 AMP DC power supplies
*Box Size : 210(H)*220(W)*80(D)mm
*Specify Out put: 12V DC
*Specify Input:120Vac(or 230V AC)
*Filtered & regulated DC output
*Short Circuit protection
*Build-in backup battery Charger for Uninterruptible
*2 AMP DC power supplies
*Box Size : 210(H)*220(W)*80(D)mm
*Specify Out put: 12V DC
*Specify Input:120Vac(or 230V AC)
*Filtered & regulated DC output
*Short Circuit protection
*Build-in backup battery Charger for Uninterruptible
E-229191
E-910352
Uninterruptible
Power Supply
1
2
3
4
5
6
7
8
9
0
*
#
Reader
(outdoor)
Lock
Device
Door Loop
Push Bar
Power Supply Unit
Features
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
Website: gianni.tw
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Power Supply Unit
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
DBR-200 Relay Module
An exceptionally versatile version of the DBR-200 relay
module, The DBR-200 will operate on AC Voltages ranging
from 8 volts to 30 volts and will also work satisfactorily on DC
voltages from 11 volts to 30 volts. The DBR-200 Relay module
is worked when power input then contacts will change over
from N/C (Normally Close) to N/O (Normally Open)
.
Supply Voltage:
Current at 12 Volts:
Double Pole Charge Over
Contacts Rated at:
8~30Vac
11~30Vdc
45mAmps
5ampsat24oVac
5ampsat30Vdc
Link Wire
Cutifover24volts
Cutifover18volts
Link Wire
Com.
N/C
N/O
N/O
Com.
N/C
Input
AC or DC
RELAY
Form 1
Form 2
12TBU-5
PB NO GND NC
16Vac Input
12Vdc output
Relocking contact
Lock Device
Fail-safe
Power to lock
Lock Device
Fail-secure
Power to unlock
Battery(Option)
Access control
(Request-to-exit )
(Outdoor)
(Indoor)
Push Button
(N/O)
PSU-200
Shorted
Relay
Voltage Adjust
(8~16Vdc)
Fuse 2A
Fuse 2A
1~30seconds
relocking time delay
Connecting Diagram Optional Accessories
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GL-1200S Ver. C Published on 2008.05.12
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
Website: gianni.tw
  • Page 1 1
  • Page 2 2

Gianni Industries GPS-3A User manual

Category
Power supply units
Type
User manual
This manual is also suitable for

Gianni Industries GPS-3A is a 2 AMP DC power supply with a compact wall-mounted steel fabricated case and a lift-off hinged front panel. In the event of a mains power failure, standby power is automatically provided from battery charging output. The model consists of a simple output and a built-in adjustable timer module for application of door relocking on fail-safe (power to lock) or fail-secure (power to unlock) locking devices. Other features include:

  • Adjustable timer module: 1-30 seconds
  • Filtered & regulated DC output
  • Short circuit protection
  • Build-in backup battery charger for uninterruptible power supply

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI