Gianni Industries AD-425S is an automatic door operator designed for easy access and convenience, especially for people with disabilities or in high-traffic areas like hospitals or nursing homes. It allows for hands-free door opening and closing, featuring selectable operating speeds and adjustable hold-open time up to 35 seconds. The device operates quietly and reliably, accommodating doors with a width of 75 to 120 cm and a weight of 50 to 100 kg.
Gianni Industries AD-425S is an automatic door operator designed for easy access and convenience, especially for people with disabilities or in high-traffic areas like hospitals or nursing homes. It allows for hands-free door opening and closing, featuring selectable operating speeds and adjustable hold-open time up to 35 seconds. The device operates quietly and reliably, accommodating doors with a width of 75 to 120 cm and a weight of 50 to 100 kg.
Statement
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
AD-425S
Automatic door operator
The AD-425S Automatic Door Operation is a reliable and quiet
door opening and closing device. This product is ideal for
enabling access to areas for people with disabilities or simply
for convenience (ex: like hospital, old folk's home... and so on)
. It is compact and can be used in combination with other
devices such as microwave sensors or card readers to control
operation.
Specifications
Motor specification
Wing dimensions
Dimensions
Product weight
Degree of protection
Temperature
Battery charge
Battery Specification
Hold-Open time
Opening/Closing time
Current
Power Input
AC 110( or 220V)
3.5A max., 0.6A average (Motor)
30Nm
4.5~9.5 seconds 90（）
1~35 seconds
12V 1.2AH
-20 ~+55 (Battery 5 ~40 )?? ??
Door wing width : 75~120 cm
Door wing weight : 50~100 kg
IP12D
6.5 kg
12V=0.15A (Normal); 0.3A (Peak)
Operator: 526(L) x 100(W) x 96(D)
Arm: 375
(unit: mm)
Voltage: 8~24VDC
Maximum current : 4A
Output : 65W
Frequency: 2400 RPM
Torque
1. Cover
2. Motor
3. Reducer
4. Square Couplings
5. Control Board
6. Battery
7. Power Switch
8. Operating Arm
9. Sliding Rail
10. Stopper Ball
11. Baseplate
12. Transformer
13. Encoder
14. Photocell
14
13
1
2
3
5
6
7
4
9
8
EC862636
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
AD-425S
Automatic door operator
Backup battery
In case of mains power failure, a backup
battery can maintain normal opening
and closing operations up to 250 times.
Wing dimensions
10 20 30 40 50 60 70 80 11090 120100
A
B
Features
Door wing width cm
Door wing weight kg
Service Class A: average of up to 600 cycles per day
Service Class B: average of under 200 cycles per day
（）
（）
Safety sensor
AD-425S incorporates a safety sensor.
When an obstruction is detected the
door will be returned to its previous
open or closed position to prevent
accidents.
Applicable for all doors
AD-425S can be mounted to open
outwards or inwards and fits either left
or right swinging doors.
High accuracy
A built in Photocell and encoder are
used to control the action of the
operating arm. Desired opening angle
and appropriate braking distances can
be accurately managed.
Wide Range
It is suitable for doors with width
between 75 ~ 120 cm and weight
between 50 ~ 100 kg .
※ See Figure Wing dimensions
Selectable dual voltage
The AD-425S operates on either 110V
or 220V mains power such that it can be
used almost anywhere in the world.
110/220V
Allinone
The AD-425S has interfaces for up to six
optional devices such as
electromagnetic locks, press to open
buttons, microwave sensors, card
readers and other accessories.
Maintain-Open time
The door can be adjusted to open for a
maximum of 35 seconds. This is
suitable for both disabled and
wheelchair users.
Quiet and Reliable
AD-425S is quiet and reliable when
operating.
Selectable operating speeds
Four selectable operating speeds
settings and two levels of torque output
can be chosen based on the width and
weight of the door.
Push&Gooption
AD-425S includes a switch to select
between auto and manual mode. In
manual mode, applying force to the door
will activate the opening.
Remote controls
Can be used in conjunction with
wireless remote controls.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
No. 13, Chung Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
E-Mail: [email protected]
Website: gianni.tw
Tel: 886-2 2267 0322 / Fax: 886-2 2267 0323
AD-425S
Automatic door operator
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Dimension
526
100
375
96
PUSHHOLDON
OFFOPENGO
0
0
1
1
Unit: mm
Refer to figure for in-swing door (right-hand).
GEM
In-swing
Install AD-425S on an out-swing door, make sure
that the distance between the header and leaf is
not more than 60mm, and the space between the
header and Sliding Rail mounting hole must be
60mm, on an in-swing door, make sure that the
distance between Square Couplings and hinge is
not more than 74mm , the space between header
and the bottom of AD-425S must be 23mm, and
the space between header and Sliding Rail
mounting hole must be 39mm.
Depending on the door leaf opening
120°
Stopper Ball
(Max.)60mm
61mm
Out-swing
Header
23mm
39mm
74mm
In-swing
Header
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Application
In-swing
AD-425S
GEM
Right-hand
Right-hand
Out-swing
AD-425S
Left-hand
Left-hand
Out-swing
AD-425S
In-swing
AD-425S
GEM
GEM
GEM
Out-swing door Right / Left hand
In-swing door Right / Left hand
To mount the AD-425S depends on the
direction way of the doors, out-swing, in-
swing, right- open and left-hand doors by
adjusting the F/R switch and the direction
of the Operating Arm.
Operating Arm turns clockwise or .counter-clockwise
Opening angle: 90 degrees.
TC Maintain time of 1-35 seconds
Beginning
Destination
Brake for wall blanking function.
VM action time is the opening and closing time.
.
Beginning
Beginning
Destination(TC Maintain time)
Destination
Brake
Brake
V
M
A
c
t
i
o
n
t
i
m
e
V
M
A
c
t
i
o
n
t
i
m
e
Open DoorOpen Door
Close DoorClose Door
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
AD-425S
Automatic door operator
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
AD-425S
Automatic door operator
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Relay outputRelay output
Relay outputRelay output
Relay outputRelay output
N. O.
Com.
N. O.
Com.
N. O.
Com.
N. O.
Com.
Application
3
4
1
2
Wireless Push Button
Access Control System
Microwave sensor switch
Electric Locking Device
Please refer to our website at http://gianni.tw to find out more
details about the optional accessories instruction and other
relevant documentation.
1
1
1
1
1
1
1
1
2
3
8
9
2
3
8
9
VM TC
REDA2
REDA1
1
2
3
8
9
1
2
3
8
9
N.C.
N.O.
Com.
N.C.
N.O.
Com.
Relay
Lock()
Relay
Lock()
Relay
()Motor
Relay
Motor()
Battery
AC15V inAC15V in
Motor
LED
(Motor)
LED
(Motor)
LED
( Charge)
LED
(
Charge)
LED
(DCin)
LED
(
DC in)
LED
( Relay)
LED
(
Relay)
Fuse
12V
1.2Ah
12V
1.2Ah
Power to LockPower to Lock
Power to OpenPower to Open
DC PowerDC Power
GEM
In-swing
1
2
(Outdoor)
4
0~7meter
Max. 4.5 meter
3
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
-
1
-
2
-
3
-
4
-
5
Gianni Industries AD-425S is an automatic door operator designed for easy access and convenience, especially for people with disabilities or in high-traffic areas like hospitals or nursing homes. It allows for hands-free door opening and closing, featuring selectable operating speeds and adjustable hold-open time up to 35 seconds. The device operates quietly and reliably, accommodating doors with a width of 75 to 120 cm and a weight of 50 to 100 kg.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Gianni Industries CP-22 Series User manual
-
-
-
-
Gianni Industries 10020 User manual
-
Gianni Industries BTS-486BTS-300 User manual
-
-
-
-