2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Computer cases
  6. Sharkoon
  7. Tauron

Sharkoon Tauron, TAURON GREEN EDITION, TAURON RED EDITION, TAURON WHITE EDITION Specification

  • Hello! I am an AI chatbot trained to assist you with the Sharkoon Tauron Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TAURON
Manual
Tauron
2
Content
1. Features 3
2. Package content 3
3. The case at a glance 4
4. Installation notes 8
5. Rebuilding the HDD cages 9
6. Installation of a mainboard 11
7. Installation of a PSU 14
8. Installation of a HDD 15
9. Installation of an optical device 17
10. Installation of a 3.5" device 19
11. Installation of an add-on card 21
12. The pre-installed fans / using the fan control 21
13. Installation of additional fans / optimized airflow 22
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend you to read this manual
completely.
Enjoy our product!
SHARKOON Technologies
Tauron
3
1. Features
• ATXcase
• 2x5.25"drivebays(external)
• 1x5.25"or3.5"drivebays(external)
• 7x2.5"or3.5"bayswithremovablemountingtraysforHDDs(internal)
• TopI/O:2xUSB3.0,2xUSB2.0and2xaudio,powerandresetbutton,2xfanspeedcontrollersfor
upto6fans
• 7slotsforadd-oncards
• Acrylicsidepanel
• Plasticfrontpanelwithairinlet,drivebaycoversinmeshdesign
• Quickfastenersforopticaldrives,mainboardmountingwithinstallationopeningforCPUcoolers
• 4openingsforwatercooling
• Cablemanagementsystem
• Interiorpainting
• RemovableHDDbracketssupportlongVGAcardsupto42cm
• Fanconguration:
Frontpanel 2x120mmLEDfan(pre-installed)
Rearpanel 1x120mmfan(pre-installed)
Toppanel 1x170mmfan(pre-installed)
• Dimensions:510x205x495mm(LxWxH)
• Weight:~9.5kg
2. Package contents
• ATXcase“Tauron”
• Manualyer
• Accessorykit
Screwsformainboardmoun-
ting
Mountingscrewsfor2.5"
HDDs/SSDs
ScrewsforPSU
mounting
ScrewsforHDDmounting
Note:
Ifyouaremissinganyoftheitemslistedabove,
pleasecontactour
customerserviceimmediately:
[email protected](GermanyandEurope)
[email protected](international).
Stand-offsformainboard InternalUSB3.0adapter
Tauron
4
3. The case at a glance
Frontpanel
A – 5.25"drivebays
B – 3.5"mountingbay
C – behindthemeshpanel:2x120mmLEDfans
Sidepanel(closed/left)
A – Acrylicsidepanel
A
A
B
C
Tauron
5
Sidepanel(opened/left)
A – Mainboardmountingpanel
a – InstallationopeningforCPUcoolers
b – Cablefeedthrough
B – 5.25"drivebays
C – 3.5"mountingbay
D – Quickfasteners
E – HDDcages
Sidepanel(closed/right)
A – AirinletforCPU
B – AirinletforHDDs
a
b
A
A
B
B
C
D
E
Tauron
6
Sidepanel(opened/right)
A – 5.25"drivebays
B – 3.5"mountingbay
C – Quickfasteners
D – HDDcages
E – Mainboardmountingpanel
a – InstallationopeningforCPUcoolers
b – Cablefeedthrough
Rearpanel
A – OpeningforI/Oshield
B – Openingsforwatercooling
C – 120mmfan
D – Slotbezels
E – PSUbracket
a
b
A
A
B
B
B
C
C
D
D
E
E
Tauron
7
Toppanel
A – On/offbutton
B – TopI/O:
a – 2xUSB3.0
b – 2xaudio
c – Resetbutton
d – 2xUSB2.0
e – 2xfancontrol
C – underthemeshbezel:
170mmfan
Bottompanel
A – Casefeet
B – AirinletforPSU
C – Fanbracketfor120mmor140mmfan
a
b
c
d
e
e
A A
A
A
A
A
B
B
C
Tauron
8
TheinternalI/Oconnectors
A – Audioconnectorsfor:
a – HDAudio
b – AC’97
B – USB2.0connector
C – 2xUSB3.0connectors
D – Fancontrolconnector
E – Front-I/Opowerconnector
F – Connectorsfor:
a – PowerSwitch
b – PowerLED–
c – Power-LED+
d – HDD-LED
e – Reset-Switch
4. Installation notes
1.ForfurtherinformationonhowtoinstallthePCcomponents,pleasealsorefertotheirrespective
instructions.
2.Inordertoguaranteefullfunctionalityofthefancontrolsandthefrontconnectors,thefront-I/O
powerconnectormustbeconnectedtothepowersupply.
a
a
b
b
c
d
e
A B C D
E F
Tauron
9
5. Rearranging the HDD cages
TheHDDcagesofthecasemaybere-arranged,sothatVGAcardsupto42cmcanbeinstalled.
Deliverystatus
RemovedHDDcages
 AlternativeHDDcagearrangements
Tauron
10
InordertoremovetheHDDcages,proceedasfollows:
1.Unscrewthethumbscrewsonthebacksideofthecaseandremovebothsidepanels.
2.LifttheattachmentleveroftherespectiveHDDcage(g.1)anddragthecageoutofitstting(g.1b).
g.1ag.1b
3.SlidetheHDDcageintotherespectivebottomttingofthecaseuntiltheattachmentleverlocks
(g.2aandb).
g.2ag2b
Tauron
11
6. Installation of a mainboard
1.Unscrewthethumbscrewsonthebacksideofthecaseandremovebothsidepanels.Laydownthe
casesidewiseonanevensurface.
2.Themountingpanelofthemainboardinsidethecaseprovidesvariousmountingholestoxthe
standoffs(g.3).
Fig.3
Themainboardcontainsspecialscrewmounts(g.4).
Fig.4
Tauron
12
Placethemainboardtothemountingpanel.Astandoffmustbescrewedintoeveryholeonthemounting
panelvisiblethroughthemainboard’sscrewopenings.
3.Removethemainboardandscrewthestandoffsintothetheirrespectiveholesonthemountingpanel
(g.5).
(Standoffs)
Fig.5
4.InserttheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeningintherearpanelofthe'
case.
Tauron
13
5.Placethemainboardbackontothestandoffsandscrewthemainboardtothem(g.6).
(Screwsformainboardmounting)
Fig.6
6.Plugtheconnectorsofthecase’sfrontbezeltotherespectiveconnectorsofthemainboard(pleaserefer
toyourmainboard’smanualforfurtherinformation).
Tauron
14
7. Installation of a PSU
1.Positionthecaseinfrontofyouand–fromtheinside–positionthePSUagainstthePSUbracketonthe
case’srearpanel(g.7).
Fig.7
2.ScrewthePSUtothecasefromtheoutside(g.8).
(ScrewsforPSUmounting)
Fig.8
Tauron
15
8. Installation of a HDD
1.TakeamountingframefromoneoftheHDDcages(g.9).
Fig.9 Mountingframe
2.PlaceanHDDintothemountingframe(connectorspointingbackwards/g.10aandb).
Fig.10aFig.10b
Tauron
16
3.AttachtheHDDtothemountingframefrombelow(g.11aandb).
Fig.11a Fig.11b
4.SlidethemountingframeintotheHDDcageuntilitlocks(g.12).
Fig.12
5.ConnecttheHDDtothePSUandthemainboard.
Tauron
17
9. Installation of an optical device
1.Removethecase’sfrontpanelbygentlypullingittowardsyou(g.13).
Fig.13
2.Dismantlethe5.25"frontbezelfromthemountingbaybyremovingitfromthefrontpanel(g.14).
Fig.14
Tauron
18
3.Placethefrontpanelbackontothecase.
4.Slidetheopticaldriveintothecase’sdrivebay(g.15).
Fig.15
5.Attachtheopticaldevicetothecasefrombothsidesusingthequickfasteners(g.16).
Fig.16
Note:
If you intend to transport the case, we recommend that you screw-in the built-in devices (additionally).
6.Connecttheopticaldrivetothepowersupplyandthemainboard.
Tauron
19
10. Installation of a 3.5" device
1.Removethecase’sfrontpanelbygentlypullingittowardsyou.
2.Dismantlethe3.5"frontbezelbyremovingitfromthefrontpanel(g.17).
Fig.17
3.Unlockthequickfasteners,whichattachthemountingframefor3.5”devicesinsidethecase(g.18a)
andremovethemountingframefromthecase(g.18b).
Fig.18a
Fig.18b
(Carefullyremoveanoptionallypresentmetalbezelcoveringthe3.5"drivebaybyusingagripper.)
Tauron
20
4.Placethe3.5"deviceintothemountingframefor3.5"devicesandattachthedevicetotheframefrom
bothsides(g.19).
Fig.19
5.Slidethemountingframewiththeinstalled3.5"deviceintothecase’smountingbay(g.20a)andlockit
frombothsidesusingthequickfasteners(g.20b).
Fig.20aFig.20b
6.Connectthe3.5"devicetothepowersupplyandthemainboard.
7.Replacethefrontbezeltothecase.
Page is loading ...
Page is loading ...
Page is loading ...
/