Cybex International 8830 Owner's manual

8830
Brand
Cybex International
Model
8830
Category
Fitness, gymnastics & weight training
Type
Owner's manual

This manual is also suitable for

Bravo
™
8830/8840
Owner’s Manual
Strength Systems
Part Number 8830-999-4
www.cybexintl.com
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc.
Bravo
®
and its mark are registered trademarks of Cybex International, Inc.
DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise
this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or
changes.
© Copyright 2011, Cybex International, Inc. All rights reserved. Printed in the United States of America.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com • 8830-999-4
Table of Contents
Safety
Safety Guidelines And Practices ............... 3
Securing Equipment ......................... 6
Regular Maintenance Activities ................ 7
Warnings and Cautions ...................... 8
Label Placement............................ 9
Assembly
Machine Specications...................... 10
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Environment and Storage.................... 10
Assembly Procedure ........................11
Install weight plates ........................ 13
Cable routing ............................. 14
Weight stack decals ........................ 15
Exercise
Intended Use ............................. 19
Instructions ............................... 19
Maintenance
Daily Procedures .......................... 22
Weekly Procedures ........................ 25
Yearly Procedures ......................... 27
Cable Adjustment .......................... 28
Belt Adjustment............................ 29
Customer Service
Product Registration........................ 30
Contacting Service ......................... 30
Ordering Parts ............................ 31
Return Material Authorization (RMA) ........... 32
Damaged Parts............................ 32
3
Cybex Bravo 8830/8840 Owner’s Manual
Safety
Safety Guidelines And Practices
Cybex International partners with equipment owners to establish the safest and most effective setup
of Cybex equipment. Cybex International urges each facility owner to carefully follow all safety
precautions. Following theses precautions are the best protection against personal injury or damage
to equipment or facility.
The most important safety precaution is to maximize stability for every piece of equipment. The
equipment should be securely anchored to the oor. It is imperative the oor be level.
Cybex recommends that all tness equipment be used in a supervised area. It is recommended that
the equipment be located in an access controlled area. Control is the responsibility of the owner. The
extent of control is at the discretion of the owner.
It is the responsibility of the purchaser/owners of Cybex products to read and understand the owner’s
manual, and warning labels; as well as instruct all individuals, whether end users or supervising
personnel, on proper usage of the equipment.
Read the Owner’s Manual carefully before assembling, servicing, or using the equipment. In an
institutional environment, it is the facility owner’s responsibility to properly instruct users on the proper
operation of the equipment and to warn them of the potential hazards.
Follow and enforce the User Safety Precautions to protect both the user and the equipment.
Keep children away from selectorized strength equipment. Teenagers or disabled users must be
supervised.
Do not allow anyone, including trainers, to use equipment in a manner other than shown on the
instructional placards located on every machine.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper
operation of the equipment and review all labels.
WARNING: Serious injury or death could occur if these safety precautions are not
followed:
User Safety Precautions
• Read all warnings posted on the machine. Warnings are posted on each machine to alert the
user to potential problems. Following warning labels will prevent injury or equipment damage.
• Read and understand warning labels and instructional placards prior to exercising. Obtain
instruction prior to use. Each machine has instructions posted on the equipment for proper
use.
4
Cybex Bravo 8830/8840 Owner’s Manual
• Use the selectorized and plate loaded machines as shown on placards. DO NOT modify the
machine.
• Never pin the weights in an elevated position. DO NOT use the machine if found in this condition.
Seek assistance from oor staff. Weights pinned up have the potential to fall if the user pulls the
pin. Floor staff should lower the weights to prevent potential problems.
• Be certain that the weight pin is completely inserted (for selectorized strength equipment that
employ weight stacks). If the pin is not completely inserted the user may accidentally drop the
weights if the pin falls out.
• Never use dumbbells or other means to incrementally increase the weight resistance. Use only
those means provided by the manufacturer for the equipment. Altering the machine design by
adding additional weight as with dumbbells or other means can injure the user, may damage the
equipment, and will void the warranty.
• Set up, anchor, and operate selectorized strength equipment on a solid level surface. If the oor is
not level the equipment is not stable.
• DO NOT wear loose or dangling clothing or jewelry while using selectorized strength equipment.
Stay clear of all moving components. Loose clothing or dangling jewelry can become entangled in
moving parts and potentially cause severe injury or damage.
• Consult a physician prior to commencing an exercise program. If at any time during exercise you
feel faint, dizzy or experience pain, stop and consult your physician. Users must be responsible
and cautious with the condition of their own health. Consulting a physician before beginning a
program can alert the user to the personal risk if health is an issue.
• Use a spotter for Free Weight equipment. A spotter adds an additional level of safety.
• DO NOT exceed the maximum specied user weight. Too much weight on a machine may prevent
it from proper function or damage the machine.
• DO NOT use if equipment appears damaged or inoperable upon inspection. If the equipment
appears damaged or inoperable- contact the oor staff.
• DO NOT attempt to x a broken or jammed equipment. Notify oor staff. It is the owner’s
responsibility to repair broken or jammed equipment.
• DO NOT use if guards are missing or damaged. A missing or broken guard should be replaced by
a qualied technician. Guards prevent things from interfering with function.
• DO NOT remove any labeling from equipment. Replace any damaged labels. Labels give users
specic information and alerts. Replacing damaged labels ensures users can read the labels for
information provided.
Facility Safety Precautions
• Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
• It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance
is performed.
5
Cybex Bravo 8830/8840 Owner’s Manual
• Inspect the equipment for worn or loose components prior to use. Tighten/replace any loose or
worn components before to using. Pay close attention to belts, cables, grips or pulleys and their
connections. Always look for potential problems in equipment condition. Loose components should
be tightened to function properly. Replacing worn components maintains the equipment is in the
best condition for regular use.
• To maximize stability, securely anchor each machine to the oor using the anchor holes provided
in each machine. Each machine must be set up, anchored, and operated on a solid level surface.
Do not install equipment on an uneven surface!
DANGER !
Death or serious injury will occur if the
following requirements are not met:
Cybex is not able to anchor the equipment due to local building codes.
The owner is responsible for the actual anchoring of equipment.
Consult with a professional contractor.
Use fasteners having a minimum of 500 lbs. tensile capacity -- Cybex
recommends 3/8” grade 2 bolts or better.
If legs/frame does not contact surface, DO NOT pull down with
anchors. Shim any leg or frame not in contact with surface using at
washers.
• Ensure that all users are properly trained on how to use the equipment.
• Verify there is enough room for safe access and operation of the equipment. Spacing requirements
for each piece of equipment vary depending on placement. The Assembly section gives equipment
dimensions but it is up to the facility to verify there is clearance between and around each machine
to operate without interference.
• Perform regular maintenance checks on the equipment as detailed in the Maintenance section
of this manual. Inspect all areas most susceptible to wear, including, (but not limited to) cables,
pulleys, belts, and grips.
• Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components then remove from service until the repair is made.
• Use only Cybex supplied components to maintain/repair the equipment.
• Keep a repair log of all maintenance activities.
• Display the Facility Safety Sign so it is visible and prominent.
6
Cybex Bravo 8830/8840 Owner’s Manual
Securing Equipment
Do not use machine until it is properly anchored.
The machine has holes in the feet, which allow for ease in anchoring to the oor. All anchoring holes
must be used to maximize stability. Equipment must be secured to a solid, level surface to eliminate
rocking, tipping, or falling over due to incorrect usage and misuse.
The solid, level surface should not deviate more than 1/8” over a 10’ distance or as dened and
required by local building and architectural codes.
Anchoring of equipment must be completed by a qualied licensed contractor.
Due to the wide variation of ooring on which machines may be anchored or installed, verify
anchoring method and anchoring fasteners with a qualied and licensed contractor.
A minimum pull out force of 220 lbs/100 kgs is required for each anchor position.
PROPER USAGE
Use equipment only as described in the manual or on the placards located on each machine. Failing
to follow proper instructions may result in injury.
STANDARD COMPLIANCE
Cybex products meets applicable ASTM and EN Standards.
7
Cybex Bravo 8830/8840 Owner’s Manual
Regular Maintenance Activities
Preventative maintenance activities must be performed to maintain normal and safe operation of your
equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all
preventative maintenance activities. The preventative maintenance actions are described in detail in
the maintenance section of this manual. Briey, they include:
Daily
Clean upholstery.
Weekly
• Inspect all nuts and bolts for looseness. Tighten as required.
• Inspect all cables and belts for damage or wear. If a cable or belt is worn or damaged, immediately
discontinue use until cable or belt has been replaced.
• Check for worn handles, worn snap links, and worn warning labeling. Replace all worn parts
immediately.
• Inspect for loose or worn grips. Replace all loose or worn grips immediately.
• Inspect weight stacks for proper alignment and operation. Correct all improper alignment and
operation issues immediately.
• Lubricate guide rods using automotive engine oil only.
Yearly
Replace all cables and belts at least annually.
8
Cybex Bravo 8830/8840 Owner’s Manual
Warnings and Cautions
Warning decals indicate a potentially hazardous situation that could result in death or serious injury if
the precautions are not observed.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor
or moderate injury.
The diagram following the decals show where each decal is located.
125
1:1
OWATONNA
MFG. APPR.
TECH. PUBS. APPR. DATE
DATE
REV.
DWG. NO.
SCALE
SIZE
CHECKED BY
DWG. BY
TITLE:
FINISH:
MATERIAL:
B
SHEET
OF
1 1
EXCEPT AS NOTED
GENERAL
TOLERANCES:
2 DECIMALS ± .03
3 DECIMALS ± .015
ANGLES ± 1°
FEATURES SHOWN
PERPENDICULAR OR
PARALLEL SHALL BE
SO WITHIN ± 1°
REMOVE ALL BURRS
BREAK SHARP EDGES
.005/.010 R
SURFACE FINISH
INDICATED PER
ANSI B46.1-1985
GENERAL
MACHINING
DIMENSIONS
IN INCHES
DATE
DATE
REMOVE CARBURIZATION
AND SCALE FROM LASER
AND PLASMA CUT EDGES
B
WARNING DECAL, ENGLISH
4605-381-4
EML
3/26/2007
NOTE: See Engineering Drawing 4506-381-X for specifications.
ALL MATERIAL MUST COMPLY TO
EUROPEAN UNION DIRECTIVE
2002/95/EC RoHS (RESTRICTION
OF HAZARDOUS SUBSTANCES)
4605-381-4 B
WARNING
SERIOUS INJURY
COULD OCCUR IF
THESE PRECAUTIONS
ARE NOT OBSERVED
2. Read and understand warning labels
and user manual prior to exercising.
Obtain instruction prior to use.
1. Obtain a medical exam prior to
beginning an exercise program.
3. Keep body and clothing free from
and clear of all moving parts.
4. Inspect machine prior to use. DO
NOT use if it appears damaged or
inoperable.
5. DO NOT attempt to fix a broken or
jammed machine. Notify floor staff.
6. Use the machine only for the
intended use. DO NOT modify the
machine.
7. Be sure that the weight pin is
completely inserted. Use only the pin
provided by the manufacturer. If unsure
seek assistance.
8. Never pin the weights in an elevated
position. DO NOT use the machine if
found in this condition. Seek assistance
from floor staff.
9. Children must not be allowed near
this machine. Teenagers must be
supervised.
10. DO NOT use if guards are missing
or damaged.
11. DO NOT use dumbbells or other
incremental weights, except those
provided by the manufacturer.
12. Inspect all cables and belts and
connections prior to use. DO NOT use
if any components are worn, frayed,
or damaged.
13. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED.
2.25
R .19
4 PLACES
PART NUMBER WITH
REVISION DESIGNATION
7 PT ARIAL
12 PT ARIAL FONT
R .25
4 PLACES
INSET .06
WHITE
SAFETY ORANGE PMS 152
BLACK TRIANGLE W/ ORANGE
EXCLAMATION POINT, BLACK LETTERS
23 PT ARIAL BOLD FONT
8.00
8.25 PT ARIAL FONT
WHITE BACKGROUND
BLACK LETTERS
JKW 8/16/2006 BB 10-18-06
125
1:1
OWATONNA
MFG. APPR.
TECH. PUBS. APPR. DATE
DATE
REV.
DWG. NO.
SCALE
SIZE
CHECKED BY
DWG. BY
TITLE:
FINISH:
MATERIAL:
B
SHEET
OF
1 1
EXCEPT AS NOTED
GENERAL
TOLERANCES:
2 DECIMALS ± .03
3 DECIMALS ± .015
ANGLES ± 1°
FEATURES SHOWN
PERPENDICULAR OR
PARALLEL SHALL BE
SO WITHIN ± 1°
REMOVE ALL BURRS
BREAK SHARP EDGES
.005/.010 R
SURFACE FINISH
INDICATED PER
ANSI B46.1-1985
GENERAL
MACHINING
DIMENSIONS
IN INCHES
DATE
DATE
REMOVE CARBURIZATION
AND SCALE FROM LASER
AND PLASMA CUT EDGES
CAUTION DECAL ENGLISH
8500-025-4
A
NOTE: See Engineering Drawing 8500-025-X for specifications
1.75
1.75
R .19
4 PLACES
PART NUMBER
6 PT ARIAL BOLD
WHITE BACKGROUND WITH
BLACK 10 PT ARIAL BOLD TEXT.
SAFETY YELLOW PMS 108
BACKGROUND. BLACK TRIANGLE
W/ YELLOW EXCLAMATION POINT,
BLACK LETTERS 18 PT ARIAL BOLD
TEXT.
INSET .06
WHITE
8500-025-4 A
Failure to correctly
adjust could result in
personal injury.
Always fully engage
the detent pin before
use to avoid injury.
CAUTION
ALL MATERIAL MUST COMPLY TO
EUROPEAN UNION DIRECTIVE
2002/95/EC RoHS (RESTRICTION
OF HAZARDOUS SUBSTANCES)
125
1:1
OWATONNA
MFG. APPR.
TECH. PUBS. APPR. DATE
DATE
REV.
DWG. NO.
SCALE
SIZE
CHECKED BY
DWG. BY
TITLE:
FINISH:
MATERIAL:
B
SHEET
OF
1 1
EXCEPT AS NOTED
GENERAL
TOLERANCES:
2 DECIMALS ± .03
3 DECIMALS ± .015
ANGLES ± 1°
FEATURES SHOWN
PERPENDICULAR OR
PARALLEL SHALL BE
SO WITHIN ± 1°
REMOVE ALL BURRS
BREAK SHARP EDGES
.005/.010 R
SURFACE FINISH
INDICATED PER
ANSI B46.1-1985
GENERAL
MACHINING
DIMENSIONS
IN INCHES
DATE
DATE
THIS NOTE REFERS TO ALL PLASTIC PARTS
AND ASSEMBLIES CONTAINING PLASTICS.
RAW MATERIAL AND COMPONENTS ON
SUB-ASSEMBLIES AND ASSEMBLIES MUST
COMPLY WITH EUROPEAN DIRECTIVE
RoHS 2002/95/EC.
REMOVE CARBURIZATION
AND SCALE FROM LASER
AND PLASMA CUT EDGES
CAUTION DECAL ENGLISH
8800-442-4
A
NOTE: See Engineering Drawing 8800-442-X for specifications.
REL
10/29/08
BB
10/29/08
8800-442-4 A
Do not rest body
weight on stabilization
pad or arm.
Doing so may result
in personal injury.
CAUTION
1.75
1.75
R .19
4 PLACES
PART NUMBER
6 PT ARIAL TEXT
WHITE BACKGROUND WITH
BLACK 10 PT ARIAL BOLD TEXT.
SAFETY YELLOW PMS 108 BACKGROUND.
BLACK TRIANGLE W/ YELLOW EXCLAMATION POINT,
BLACK LETTERS 18 PT ARIAL BOLD TEXT.
INSET .06
WHITE
9
Cybex Bravo 8830/8840 Owner’s Manual
Label Placement
8500-025-X
8500-025-X
8840 Chin-Up Bar
8800-442-X
4605-381-X
8500-025-X
10
Cybex Bravo 8830/8840 Owner’s Manual
Assembly
Machine Specifications
Dimensions/Weight 8830 At Use And At Rest 8840 At Use And At Rest
L x W x H 45” L 54” W x 77” H 45” L 54” W x 87” H
L x W x H 114 cm L x 137 cm W x 196 cm H 114 cm L x 137 cm W x 221 cm H
Machine Weight 866 lbs (393 kg) 901 lbs (407 kg)
Tools Required
• 9/16” Wrench
• 7/32” Allen wrench
• 3/4” Socket
• Hammer
• 3/16” Pin punch
• Loctite® #242
Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.
Environment and Storage
Static Electricity
To reduce static electricity increase the humidity.
Humidity
The unit is designed to function normally in an environment with a relative humidity range of 30% to
75%. The unit can be shipped and stored in an environment with a relative humidity range of 10% to
90%.
Temperature
The unit is designed to function normally in an environment with an ambient temperature range of 50°
F (10° C) to 104° F (40° C).
Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna,
indoor pool or outdoors. Extensive exposure to water vapor, chlorine and/or bromine could adversely
affect the equipment.
11
Cybex Bravo 8830/8840 Owner’s Manual
Assembly Procedure
Read and understand all instructions thoroughly before assembling this unit.
Verify parts list shown below.
Qty Part Number Description Diagram
2 12090-322
Foot Pad
6.25” X 2.00”
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
2 13000-353
Foot Pad
5.00” X 2.00”
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
1 13000-354 Foot Pad
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
1 13000-355 Foot Pad
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
1 1300-551
Decal, Standard
160-200 Included with weight pack 13000-038
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
16 4700-337
Weight Plate (standard stack)
Included with weight pack 13000-038)
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
1 4800-557
Decal, Standard
10-150 Included with weight pack 13000-038
1 8810-101 Chin Up Bar
4 HC700417
BHSCS .375-16 x 1.00
included with 8810-101
2 HN704901
Locknut .375-16, Nylon
included with 8810-101
2 PN660200
Insert, Plastic 1.00 Dia-11G
included with 8810-101
1 YA000201
Loctite #242
included with 8810-101
100
45.0
20
9.0
40.5
22.5
31.5
27.0
36.0
40
18.0
13.5
80
70
60
50
10
90
30
4.5
250
113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130
59.0
106.5
79.0
93.0
86.0
100.0
160
72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
12
Cybex Bravo 8830/8840 Owner’s Manual
Move to desired location
If Then
If machine can be
moved without
adding or removing
weight stacks.
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4” socket or wrench.
3. Attach foot pads to each foot of frame.
If Then
If machine needs
weight stacks
removed before
moving to desired
location.
Two people will be required for this procedure
1. Remove the two Button Head Socket Cap Screws (BHSCS) secur-
ing the top cap to the frame using a 7/32” Allen wrench.
BHSCS
Top Cap
Shroud
2. Remove top cap and BHSCS.
3. Lift shroud up and out of machine.
4. Remove guide rod caps. Guide rod cap contains a compression
spring that will y if grasp is not released slowly. Slide spring loaded
guide rod cap down guide rod until cap is clear of frame. Slowly
release grasp of guide rod cap and remove.
Compression
Spring
Guide
Rods
Guide
Rod Cap
Compression
Spring
Guide
Rod Cap
13
Cybex Bravo 8830/8840 Owner’s Manual
If Then
If machine needs
weight stacks
removed before
moving to desired
location.
5. Repeat procedure for opposite guide rods.
6. Remove spiral pin securing cable end to top weight using a 3/16”
pin punch and hammer.
Top Weight
Connector
Roll
Pin
Pulley Bracket
Cable
7. Remove lifting post.
8. Remove weight plates
9. Move machine to desired position.
10. Remove the four shipping cones using a 3/4” socket or wrench.
11. Attach foot pads to each foot of frame.
Install weight plates
1. Install individual weight plates one at at time.
2. Position each weight plate so wide edges of bushings face upward and narrow edges
of bushings face downward.
CORRECT
Wide bushing
edge faces upward
The narrow bushing edge
must face downward.
WRONG
3. Install lifting post.
4. Snap guide rods into position.
14
Cybex Bravo 8830/8840 Owner’s Manual
Cable routing
1. Verify cable is routed through top of pulley bracket and then route cable end to top weight
connector.
2. Pull cable tight and secure in place with spiral pin using a 3/16” pin punch and a hammer.
Top Weight
Connector
Roll
Pin
Pulley Bracket
Cable
Cable
Routing
Pulley
bracket
connects
to top
weight
connector
Top Weight
Connector
Roll
Pin
Pulley Bracket
Cable
Weight Stack
Connector Pin
15
Cybex Bravo 8830/8840 Owner’s Manual
3. Place weight stack pin in each plate to verify proper installation.
4. Lift top weight up and down simulating normal operation (without selecting any resistance).
5. Verify that the cable is moving smoothly and is routed straight from the pulley bracket to the
top of the weight plate connector.
Weight stack decals
1. Choose the appropriate decal; pounds, kilograms or both.
2. Peel off back cover of decal. When peeling off back cover, make sure the decals remain
attached to the front sticker.
Front
Sticker
Back Cover
Decal
3. Align holes in decal with appropriate holes in weight stack. Do not allow the adhesive to touch
weight stack at this time.
4. Insert a guide pin through each hole of the template. A guide pin can be anything that ts
through the weight stack hole, such as a weight stack selector pin.
5. Align decal and rub it onto weight plates.
6. Remove front side, leaving decals adhering to weight plates.
Pounds
Kilograms
Install back shroud
1. Place shroud into position.
2. Secure top in place using two BHSCS and 7/32” Allen wrench.
16
Cybex Bravo 8830/8840 Owner’s Manual
If Then
8830/8840cant
through a doorway
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4” socket or wrench.
3. Attach foot pads to each foot of frame.
8830cannott
through a doorway
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Place foot pads on each foot of the frame.
3. Remove Chin-Up Bar.
Chin-Up
Bar
Insert
plug
Insert
plug
BHSCS
Locknut
BHSCS
4. Remove the four BHSCS securing one of the halves.
BHSCS
BHSCS
5. Move unit to desired location.
6. Reattach the frame halves and securely tighten the four BHSCS.
7. Reattach Chin-Up Bar. Add Loctite #242 to each BHSCS and threaded
holes. Tighten screws securely. Reattach insert plugs.
17
Cybex Bravo 8830/8840 Owner’s Manual
If Then
8840cannott
through a doorway
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Place foot pads on each foot of the frame.
3. Remove the four BHSCS securing one of the halves.
BHSCS
BHSCS
4. Move unit to desired location.
5. Reattach the frame halves and securely tighten the four BHSCS.
6. Install Chip-Up Bar. Add Loctite #242 to each BHSCS and threaded
holes. Tighten screws securely and attach insert plugs.
BHSCS
Locknut
BHSCS
Chin-Up
Bar
Insert
plug
18
Cybex Bravo 8830/8840 Owner’s Manual
Securelyanchormachinetotheoor
To maximize stability, equipment must be secured to a solid level surface.
• Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
• Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
• If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
framenotincontactwithsurfaceusingatwashers.
19
Cybex Bravo 8830/8840 Owner’s Manual
Exercise
Intended Use
The intended use of this machine is to aid or improve general physical tness and exercise for
commercial use.
Instructions
Read an understand all instructions and warnings prior to using this machine in the Safety
section of the Owner’s Manual.
1. Select appropriate resistance.
2. Adjust handles for proper pulley height.
3. Rotate pulleys to desired angle.
4. Adjust stabilization arm to desired angle.
5. Adjust stabilization pad to desired position.
6. Ensure all adjustment knobs are locked into place.
7. Position stabilization arm and pad all the way in and all the way down when nished.
CAUTION: Serious injury can result if precautions are not followed. Use equipment
only as described in placards located on each machine. Failure to use in the
manner depicted can result in injury.
CHEST PRESS
ROW
20
Cybex Bravo 8830/8840 Owner’s Manual
SEATED PRESS
ARM CURL
ARM EXTENSION
TRUNK ROTATION
HIP ABDUCTIONSQUAT
HIP FLEXION-KNEE EXTENSION
HIP ADDUCTION
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Cybex International 8830 Owner's manual

8830
Brand
Cybex International
Model
8830
Category
Fitness, gymnastics & weight training
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents