CYBEX Jungle Gym Accessory Rack Installation guide

Type
Installation guide
www.cybexintl.com
Page 1 of 3
Jungle Gym Accessory Rack
Accessory Rack
This instruction sheet describes how to add the Jungle Gym accessory rack to the Jungle Gym.
Two people are recommended for this procedure.
TOOLS REQUIRED
• 7/32” Allen wrench
• 9/16” Wrench
Read and understand all instructions thoroughly before installation.
Kit Contents:
1
6
5
4
3
2
Item Description Qty
1 Accessory rack 1
2 Plate 1
3 BHSCS, 3.25” 2
4 BHSCS, 3.50” 1
5 Locknut, nylon 1
6 Locknut, nylon patch 2
Installation Instructions
www.cybexintl.com
Page 2 of 3
Remove BHSCS from frame assembly
Remove top BHSCS and locknut from plate on frame assembly using a 7/32” Allen wrench
and a 9/16” wrench.
1
4
2
3
Item Description Qty
1 BHSCS 1
2 Locknut 1
3 Plate 1
4 Frame assembly 1
Install accessory rack to frame assembly
Install accessory rack and plate to frame assembly with BHSCS and locknuts using a 7/32”
Allen wrench and a 9/16” wrench.
7
1
2
4
5
6
3
Item Description Qty
1 Accessory rack 1
2 Plate 1
3 Frame assembly 1
4 BHSCS, 3.25” 2
5 BHSCS, 3.50” 1
6 Locknut, nylon 1
7 Locknut, nylon patch 2
Page 3 of 3
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc.
10 Trotter Drive Medway, MA 02053
508-533-4300 • FAX 508-533-5183 • www.cybexintl.com
Copyright © 2014, Cybex International, Inc. All rights reserved • 17005-322 • November 2014
www.cybexintl.com
Accessory rack installed
Jungle gym accessory rack shown with accessories attached.
  • Page 1 1
  • Page 2 2
  • Page 3 3

CYBEX Jungle Gym Accessory Rack Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI