CYBEX BRAVO 8840 Owner's manual

Brand: CYBEX

Model: BRAVO 8840

Category: Fitness, gymnastics & weight training

Type: Owner's manual

This manual is also suitable for

Bravo

™

8830/8840

Owner’s Manual

Strength Systems

Part Number 8830-999-4

www.cybexintl.com

Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc.

Bravo

and its mark are registered trademarks of Cybex International, Inc.

DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise

this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or

changes.

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com • 8830-999-4

Table of Contents

Safety

Safety Guidelines And Practices ............... 3

Securing Equipment ......................... 6

Regular Maintenance Activities ................ 7

Warnings and Cautions ...................... 8

Label Placement............................ 9

Assembly

Machine Specications...................... 10

Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Environment and Storage.................... 10

Assembly Procedure ........................11

Install weight plates ........................ 13

Cable routing ............................. 14

Weight stack decals ........................ 15

Exercise

Intended Use ............................. 19

Instructions ............................... 19

Maintenance

Daily Procedures .......................... 22

Weekly Procedures ........................ 25

Yearly Procedures ......................... 27

Cable Adjustment .......................... 28

Belt Adjustment............................ 29

Customer Service

Product Registration........................ 30

Contacting Service ......................... 30

Ordering Parts ............................ 31

Return Material Authorization (RMA) ........... 32

Damaged Parts............................ 32

Cybex Bravo 8830/8840 Owner’s Manual

Safety

Safety Guidelines And Practices

Cybex International partners with equipment owners to establish the safest and most effective setup

of Cybex equipment. Cybex International urges each facility owner to carefully follow all safety

precautions. Following theses precautions are the best protection against personal injury or damage

to equipment or facility.

The most important safety precaution is to maximize stability for every piece of equipment. The

equipment should be securely anchored to the oor. It is imperative the oor be level.

Cybex recommends that all tness equipment be used in a supervised area. It is recommended that

the equipment be located in an access controlled area. Control is the responsibility of the owner. The

extent of control is at the discretion of the owner.

It is the responsibility of the purchaser/owners of Cybex products to read and understand the owner’s

manual, and warning labels; as well as instruct all individuals, whether end users or supervising

personnel, on proper usage of the equipment.

Read the Owner’s Manual carefully before assembling, servicing, or using the equipment. In an

institutional environment, it is the facility owner’s responsibility to properly instruct users on the proper

operation of the equipment and to warn them of the potential hazards.

Follow and enforce the User Safety Precautions to protect both the user and the equipment.

Keep children away from selectorized strength equipment. Teenagers or disabled users must be

supervised.

Do not allow anyone, including trainers, to use equipment in a manner other than shown on the

instructional placards located on every machine.

It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper

operation of the equipment and review all labels.

WARNING: Serious injury or death could occur if these safety precautions are not

followed:

User Safety Precautions

• Read all warnings posted on the machine. Warnings are posted on each machine to alert the

user to potential problems. Following warning labels will prevent injury or equipment damage.

• Read and understand warning labels and instructional placards prior to exercising. Obtain

instruction prior to use. Each machine has instructions posted on the equipment for proper

use.

Cybex Bravo 8830/8840 Owner’s Manual

• Use the selectorized and plate loaded machines as shown on placards. DO NOT modify the

machine.

• Never pin the weights in an elevated position. DO NOT use the machine if found in this condition.

Seek assistance from oor staff. Weights pinned up have the potential to fall if the user pulls the

pin. Floor staff should lower the weights to prevent potential problems.

• Be certain that the weight pin is completely inserted (for selectorized strength equipment that

employ weight stacks). If the pin is not completely inserted the user may accidentally drop the

weights if the pin falls out.

• Never use dumbbells or other means to incrementally increase the weight resistance. Use only

those means provided by the manufacturer for the equipment. Altering the machine design by

adding additional weight as with dumbbells or other means can injure the user, may damage the

equipment, and will void the warranty.

• Set up, anchor, and operate selectorized strength equipment on a solid level surface. If the oor is

not level the equipment is not stable.

• DO NOT wear loose or dangling clothing or jewelry while using selectorized strength equipment.

Stay clear of all moving components. Loose clothing or dangling jewelry can become entangled in

moving parts and potentially cause severe injury or damage.

• Consult a physician prior to commencing an exercise program. If at any time during exercise you

feel faint, dizzy or experience pain, stop and consult your physician. Users must be responsible

and cautious with the condition of their own health. Consulting a physician before beginning a

program can alert the user to the personal risk if health is an issue.

• Use a spotter for Free Weight equipment. A spotter adds an additional level of safety.

• DO NOT exceed the maximum specied user weight. Too much weight on a machine may prevent

it from proper function or damage the machine.

• DO NOT use if equipment appears damaged or inoperable upon inspection. If the equipment

appears damaged or inoperable- contact the oor staff.

• DO NOT attempt to x a broken or jammed equipment. Notify oor staff. It is the owner’s

responsibility to repair broken or jammed equipment.

• DO NOT use if guards are missing or damaged. A missing or broken guard should be replaced by

a qualied technician. Guards prevent things from interfering with function.

• DO NOT remove any labeling from equipment. Replace any damaged labels. Labels give users

specic information and alerts. Replacing damaged labels ensures users can read the labels for

information provided.

Facility Safety Precautions

• Read the Owner’s Manual carefully before assembling, servicing or using the equipment.

• It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance

is performed.

Cybex Bravo 8830/8840 Owner’s Manual

• Inspect the equipment for worn or loose components prior to use. Tighten/replace any loose or

worn components before to using. Pay close attention to belts, cables, grips or pulleys and their

connections. Always look for potential problems in equipment condition. Loose components should

be tightened to function properly. Replacing worn components maintains the equipment is in the

best condition for regular use.

• To maximize stability, securely anchor each machine to the oor using the anchor holes provided

in each machine. Each machine must be set up, anchored, and operated on a solid level surface.

Do not install equipment on an uneven surface!

DANGER !

Death or serious injury will occur if the

following requirements are not met:

Cybex is not able to anchor the equipment due to local building codes.

The owner is responsible for the actual anchoring of equipment.

Consult with a professional contractor.

Use fasteners having a minimum of 500 lbs. tensile capacity -- Cybex

recommends 3/8” grade 2 bolts or better.

If legs/frame does not contact surface, DO NOT pull down with

anchors. Shim any leg or frame not in contact with surface using at

washers.

• Ensure that all users are properly trained on how to use the equipment.

• Verify there is enough room for safe access and operation of the equipment. Spacing requirements

for each piece of equipment vary depending on placement. The Assembly section gives equipment

dimensions but it is up to the facility to verify there is clearance between and around each machine

to operate without interference.

• Perform regular maintenance checks on the equipment as detailed in the Maintenance section

of this manual. Inspect all areas most susceptible to wear, including, (but not limited to) cables,

pulleys, belts, and grips.

• Immediately replace worn or damaged components. If unable to immediately replace worn or

damaged components then remove from service until the repair is made.

• Use only Cybex supplied components to maintain/repair the equipment.

• Keep a repair log of all maintenance activities.

• Display the Facility Safety Sign so it is visible and prominent.

Cybex Bravo 8830/8840 Owner’s Manual

Securing Equipment

Do not use machine until it is properly anchored.

The machine has holes in the feet, which allow for ease in anchoring to the oor. All anchoring holes

must be used to maximize stability. Equipment must be secured to a solid, level surface to eliminate

rocking, tipping, or falling over due to incorrect usage and misuse.

The solid, level surface should not deviate more than 1/8” over a 10’ distance or as dened and

required by local building and architectural codes.

Anchoring of equipment must be completed by a qualied licensed contractor.

Due to the wide variation of ooring on which machines may be anchored or installed, verify

anchoring method and anchoring fasteners with a qualied and licensed contractor.

A minimum pull out force of 220 lbs/100 kgs is required for each anchor position.

PROPER USAGE

Use equipment only as described in the manual or on the placards located on each machine. Failing

to follow proper instructions may result in injury.

STANDARD COMPLIANCE

Cybex products meets applicable ASTM and EN Standards.

Cybex Bravo 8830/8840 Owner’s Manual

Regular Maintenance Activities

Preventative maintenance activities must be performed to maintain normal and safe operation of your

equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all

preventative maintenance activities. The preventative maintenance actions are described in detail in

the maintenance section of this manual. Briey, they include:

Daily

Clean upholstery.

Weekly

• Inspect all nuts and bolts for looseness. Tighten as required.

• Inspect all cables and belts for damage or wear. If a cable or belt is worn or damaged, immediately

discontinue use until cable or belt has been replaced.

• Check for worn handles, worn snap links, and worn warning labeling. Replace all worn parts

immediately.

• Inspect for loose or worn grips. Replace all loose or worn grips immediately.

• Inspect weight stacks for proper alignment and operation. Correct all improper alignment and

operation issues immediately.

• Lubricate guide rods using automotive engine oil only.

Yearly

Replace all cables and belts at least annually.

Cybex Bravo 8830/8840 Owner’s Manual

Warnings and Cautions

Warning decals indicate a potentially hazardous situation that could result in death or serious injury if

the precautions are not observed.

Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor

or moderate injury.

The diagram following the decals show where each decal is located.

125

1:1

OWATONNA

MFG. APPR.

TECH. PUBS. APPR. DATE

DATE

REV.

DWG. NO.

SCALE

SIZE

CHECKED BY

DWG. BY

TITLE:

FINISH:

MATERIAL:

SHEET

1 1

EXCEPT AS NOTED

GENERAL

TOLERANCES:

2 DECIMALS ± .03

3 DECIMALS ± .015

ANGLES ± 1°

FEATURES SHOWN

PERPENDICULAR OR

PARALLEL SHALL BE

SO WITHIN ± 1°

REMOVE ALL BURRS

BREAK SHARP EDGES

.005/.010 R

SURFACE FINISH

INDICATED PER

ANSI B46.1-1985

GENERAL

MACHINING

DIMENSIONS

IN INCHES

DATE

REMOVE CARBURIZATION

AND SCALE FROM LASER

AND PLASMA CUT EDGES

WARNING DECAL, ENGLISH

4605-381-4

EML

3/26/2007

NOTE: See Engineering Drawing 4506-381-X for specifications.

ALL MATERIAL MUST COMPLY TO

EUROPEAN UNION DIRECTIVE

2002/95/EC RoHS (RESTRICTION

OF HAZARDOUS SUBSTANCES)

4605-381-4 B

WARNING

SERIOUS INJURY

COULD OCCUR IF

THESE PRECAUTIONS

ARE NOT OBSERVED

2. Read and understand warning labels

and user manual prior to exercising.

Obtain instruction prior to use.

1. Obtain a medical exam prior to

beginning an exercise program.

3. Keep body and clothing free from

and clear of all moving parts.

4. Inspect machine prior to use. DO

NOT use if it appears damaged or

inoperable.

5. DO NOT attempt to fix a broken or

jammed machine. Notify floor staff.

6. Use the machine only for the

intended use. DO NOT modify the

machine.

7. Be sure that the weight pin is

completely inserted. Use only the pin

provided by the manufacturer. If unsure

seek assistance.

8. Never pin the weights in an elevated

position. DO NOT use the machine if

found in this condition. Seek assistance

from floor staff.

9. Children must not be allowed near

this machine. Teenagers must be

supervised.

10. DO NOT use if guards are missing

or damaged.

11. DO NOT use dumbbells or other

incremental weights, except those

provided by the manufacturer.

12. Inspect all cables and belts and

connections prior to use. DO NOT use

if any components are worn, frayed,

or damaged.

13. DO NOT REMOVE THIS LABEL.

REPLACE IF DAMAGED.

2.25

R .19

4 PLACES

PART NUMBER WITH

REVISION DESIGNATION

7 PT ARIAL

12 PT ARIAL FONT

R .25

4 PLACES

INSET .06

WHITE

SAFETY ORANGE PMS 152

BLACK TRIANGLE W/ ORANGE

EXCLAMATION POINT, BLACK LETTERS

23 PT ARIAL BOLD FONT

8.00

8.25 PT ARIAL FONT

WHITE BACKGROUND

BLACK LETTERS

JKW 8/16/2006 BB 10-18-06

125

1:1

OWATONNA

MFG. APPR.

TECH. PUBS. APPR. DATE

DATE

REV.

DWG. NO.

SCALE

SIZE

CHECKED BY

DWG. BY

TITLE:

FINISH:

MATERIAL:

SHEET

1 1

EXCEPT AS NOTED

GENERAL

TOLERANCES:

2 DECIMALS ± .03

3 DECIMALS ± .015

ANGLES ± 1°

FEATURES SHOWN

PERPENDICULAR OR

PARALLEL SHALL BE

SO WITHIN ± 1°

REMOVE ALL BURRS

BREAK SHARP EDGES

.005/.010 R

SURFACE FINISH

INDICATED PER

ANSI B46.1-1985

GENERAL

MACHINING

DIMENSIONS

IN INCHES

DATE

REMOVE CARBURIZATION

AND SCALE FROM LASER

AND PLASMA CUT EDGES

CAUTION DECAL ENGLISH

8500-025-4

NOTE: See Engineering Drawing 8500-025-X for specifications

1.75

R .19

4 PLACES

PART NUMBER

6 PT ARIAL BOLD

WHITE BACKGROUND WITH

BLACK 10 PT ARIAL BOLD TEXT.

SAFETY YELLOW PMS 108

BACKGROUND. BLACK TRIANGLE

W/ YELLOW EXCLAMATION POINT,

BLACK LETTERS 18 PT ARIAL BOLD

TEXT.

INSET .06

WHITE

8500-025-4 A

Failure to correctly

adjust could result in

personal injury.

Always fully engage

the detent pin before

use to avoid injury.

CAUTION

ALL MATERIAL MUST COMPLY TO

EUROPEAN UNION DIRECTIVE

2002/95/EC RoHS (RESTRICTION

OF HAZARDOUS SUBSTANCES)

125

1:1

OWATONNA

MFG. APPR.

TECH. PUBS. APPR. DATE

DATE

REV.

DWG. NO.

SCALE

SIZE

CHECKED BY

DWG. BY

TITLE:

FINISH:

MATERIAL:

SHEET

1 1

EXCEPT AS NOTED

GENERAL

TOLERANCES:

2 DECIMALS ± .03

3 DECIMALS ± .015

ANGLES ± 1°

FEATURES SHOWN

PERPENDICULAR OR

PARALLEL SHALL BE

SO WITHIN ± 1°

REMOVE ALL BURRS

BREAK SHARP EDGES

.005/.010 R

SURFACE FINISH

INDICATED PER

ANSI B46.1-1985

GENERAL

MACHINING

DIMENSIONS

IN INCHES

DATE

THIS NOTE REFERS TO ALL PLASTIC PARTS

AND ASSEMBLIES CONTAINING PLASTICS.

RAW MATERIAL AND COMPONENTS ON

SUB-ASSEMBLIES AND ASSEMBLIES MUST

COMPLY WITH EUROPEAN DIRECTIVE

RoHS 2002/95/EC.

REMOVE CARBURIZATION

AND SCALE FROM LASER

AND PLASMA CUT EDGES

CAUTION DECAL ENGLISH

8800-442-4

NOTE: See Engineering Drawing 8800-442-X for specifications.

REL

10/29/08

8800-442-4 A

Do not rest body

weight on stabilization

pad or arm.

Doing so may result

in personal injury.

CAUTION

1.75

R .19

4 PLACES

PART NUMBER

6 PT ARIAL TEXT

WHITE BACKGROUND WITH

BLACK 10 PT ARIAL BOLD TEXT.

SAFETY YELLOW PMS 108 BACKGROUND.

BLACK TRIANGLE W/ YELLOW EXCLAMATION POINT,

BLACK LETTERS 18 PT ARIAL BOLD TEXT.

INSET .06

WHITE

Cybex Bravo 8830/8840 Owner’s Manual

Label Placement

8500-025-X

8840 Chin-Up Bar

8800-442-X

4605-381-X

8500-025-X

Cybex Bravo 8830/8840 Owner’s Manual

Assembly

Machine Specifications

Dimensions/Weight 8830 At Use And At Rest 8840 At Use And At Rest

L x W x H 45” L 54” W x 77” H 45” L 54” W x 87” H

L x W x H 114 cm L x 137 cm W x 196 cm H 114 cm L x 137 cm W x 221 cm H

Machine Weight 866 lbs (393 kg) 901 lbs (407 kg)

Tools Required

• 9/16” Wrench

• 7/32” Allen wrench

• 3/4” Socket

• Hammer

• 3/16” Pin punch

• Loctite® #242

Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the

equipment to ensure that there is appropriate clearance around each machine to allow for safe use

and passage.

Environment and Storage

Static Electricity

To reduce static electricity increase the humidity.

Humidity

The unit is designed to function normally in an environment with a relative humidity range of 30% to

75%. The unit can be shipped and stored in an environment with a relative humidity range of 10% to

90%.

Temperature

The unit is designed to function normally in an environment with an ambient temperature range of 50°

F (10° C) to 104° F (40° C).

Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna,

indoor pool or outdoors. Extensive exposure to water vapor, chlorine and/or bromine could adversely

affect the equipment.

Cybex Bravo 8830/8840 Owner’s Manual

Assembly Procedure

Read and understand all instructions thoroughly before assembling this unit.

Verify parts list shown below.

Qty Part Number Description Diagram

2 12090-322

Foot Pad

6.25” X 2.00”

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

2 13000-353

Foot Pad

5.00” X 2.00”

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

1 13000-354 Foot Pad

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

1 13000-355 Foot Pad

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

1 1300-551

Decal, Standard

160-200 Included with weight pack 13000-038

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

16 4700-337

Weight Plate (standard stack)

Included with weight pack 13000-038)

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

1 4800-557

Decal, Standard

10-150 Included with weight pack 13000-038

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

1 8810-101 Chin Up Bar

4 HC700417

BHSCS .375-16 x 1.00

included with 8810-101

2 HN704901

Locknut .375-16, Nylon

included with 8810-101

2 PN660200

Insert, Plastic 1.00 Dia-11G

included with 8810-101

1 YA000201

Loctite #242

included with 8810-101

100

45.0

9.0

40.5

22.5

31.5

27.0

36.0

18.0

13.5

4.5

250

113.5

147.5

140.5

265

127.0

120.0

325

310

295

280

130

59.0

106.5

79.0

93.0

86.0

100.0

160

72.5

65.5

220

205

190

175

115

235

145

52.0

134.0

Cybex Bravo 8830/8840 Owner’s Manual

Move to desired location

If Then

If machine can be

moved without

adding or removing

weight stacks.

Two people will be required for this procedure

1. Move to desired location.

2. Remove the four shipping cones using a 3/4” socket or wrench.

3. Attach foot pads to each foot of frame.

If Then

If machine needs

weight stacks

removed before

moving to desired

location.

Two people will be required for this procedure

1. Remove the two Button Head Socket Cap Screws (BHSCS) secur-

ing the top cap to the frame using a 7/32” Allen wrench.

BHSCS

Top Cap

Shroud

2. Remove top cap and BHSCS.

3. Lift shroud up and out of machine.

4. Remove guide rod caps. Guide rod cap contains a compression

spring that will y if grasp is not released slowly. Slide spring loaded

guide rod cap down guide rod until cap is clear of frame. Slowly

release grasp of guide rod cap and remove.

Compression

Spring

Guide

Rods

Guide

Rod Cap

Compression

Spring

Guide

Rod Cap

Cybex Bravo 8830/8840 Owner’s Manual

If Then

If machine needs

weight stacks

removed before

moving to desired

location.

5. Repeat procedure for opposite guide rods.

6. Remove spiral pin securing cable end to top weight using a 3/16”

pin punch and hammer.

Top Weight

Connector

Roll

Pulley Bracket

Cable

7. Remove lifting post.

8. Remove weight plates

9. Move machine to desired position.

10. Remove the four shipping cones using a 3/4” socket or wrench.

11. Attach foot pads to each foot of frame.

Install weight plates

1. Install individual weight plates one at at time.

2. Position each weight plate so wide edges of bushings face upward and narrow edges

of bushings face downward.

CORRECT

Wide bushing

edge faces upward

The narrow bushing edge

must face downward.

WRONG

3. Install lifting post.

4. Snap guide rods into position.

Cybex Bravo 8830/8840 Owner’s Manual

Cable routing

1. Verify cable is routed through top of pulley bracket and then route cable end to top weight

connector.

2. Pull cable tight and secure in place with spiral pin using a 3/16” pin punch and a hammer.

Top Weight

Connector

Roll

Pulley Bracket

Cable

Routing

Pulley

bracket

connects

to top

weight

connector

Top Weight

Connector

Roll

Pulley Bracket

Cable

Weight Stack

Connector Pin

Cybex Bravo 8830/8840 Owner’s Manual

3. Place weight stack pin in each plate to verify proper installation.

4. Lift top weight up and down simulating normal operation (without selecting any resistance).

5. Verify that the cable is moving smoothly and is routed straight from the pulley bracket to the

top of the weight plate connector.

Weight stack decals

1. Choose the appropriate decal; pounds, kilograms or both.

2. Peel off back cover of decal. When peeling off back cover, make sure the decals remain

attached to the front sticker.

Front

Sticker

Back Cover

Decal

3. Align holes in decal with appropriate holes in weight stack. Do not allow the adhesive to touch

weight stack at this time.

4. Insert a guide pin through each hole of the template. A guide pin can be anything that ts

through the weight stack hole, such as a weight stack selector pin.

5. Align decal and rub it onto weight plates.

6. Remove front side, leaving decals adhering to weight plates.

Pounds

Kilograms

Install back shroud

1. Place shroud into position.

2. Secure top in place using two BHSCS and 7/32” Allen wrench.

Cybex Bravo 8830/8840 Owner’s Manual

If Then

8830/8840cant

through a doorway

Two people will be required for this procedure

1. Move to desired location.

2. Remove the four shipping cones using a 3/4” socket or wrench.

3. Attach foot pads to each foot of frame.

8830cannott

through a doorway

1. Remove the four shipping cones using a 3/4” socket or wrench.

2. Place foot pads on each foot of the frame.

3. Remove Chin-Up Bar.

Chin-Up

Bar

Insert

plug

Insert

plug

BHSCS

Locknut

BHSCS

4. Remove the four BHSCS securing one of the halves.

BHSCS

5. Move unit to desired location.

6. Reattach the frame halves and securely tighten the four BHSCS.

7. Reattach Chin-Up Bar. Add Loctite #242 to each BHSCS and threaded

holes. Tighten screws securely. Reattach insert plugs.

Cybex Bravo 8830/8840 Owner’s Manual

If Then

8840cannott

through a doorway

1. Remove the four shipping cones using a 3/4” socket or wrench.

2. Place foot pads on each foot of the frame.

3. Remove the four BHSCS securing one of the halves.

BHSCS

4. Move unit to desired location.

5. Reattach the frame halves and securely tighten the four BHSCS.

6. Install Chip-Up Bar. Add Loctite #242 to each BHSCS and threaded

holes. Tighten screws securely and attach insert plugs.

BHSCS

Locknut

BHSCS

Chin-Up

Bar

Insert

plug

Cybex Bravo 8830/8840 Owner’s Manual

Securelyanchormachinetotheoor

To maximize stability, equipment must be secured to a solid level surface.

• Cybex is not responsible for the actual anchoring of equipment. Consult with a professional

contractor.

• Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).

• If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or

framenotincontactwithsurfaceusingatwashers.

Cybex Bravo 8830/8840 Owner’s Manual

Exercise

Intended Use

The intended use of this machine is to aid or improve general physical tness and exercise for

commercial use.

Instructions

Read an understand all instructions and warnings prior to using this machine in the Safety

section of the Owner’s Manual.

1. Select appropriate resistance.

2. Adjust handles for proper pulley height.

3. Rotate pulleys to desired angle.

4. Adjust stabilization arm to desired angle.

5. Adjust stabilization pad to desired position.

6. Ensure all adjustment knobs are locked into place.

7. Position stabilization arm and pad all the way in and all the way down when nished.

CAUTION: Serious injury can result if precautions are not followed. Use equipment

only as described in placards located on each machine. Failure to use in the

manner depicted can result in injury.

CHEST PRESS

ROW

Cybex Bravo 8830/8840 Owner’s Manual

SEATED PRESS

ARM CURL

ARM EXTENSION

TRUNK ROTATION

HIP ABDUCTIONSQUAT

HIP FLEXION-KNEE EXTENSION

HIP ADDUCTION

Page is loading ...

CYBEX BRAVO 8840 Owner's manual

Brand: CYBEX

Model: BRAVO 8840

Category: Fitness, gymnastics & weight training

Type: Owner's manual

This manual is also suitable for

Download PDF

report

CYBEX BRAVO 8840 Owner's manual

This manual is also suitable for

CYBEX BRAVO 8840 Owner's manual

Related papers

Other documents