Quick Installation Guide
Important Information
For more detailed information, please refer to the Help file in the Driver CD in the Help directory. The ways to display Help
file are as follows:
- After driver installation, please click the driver icon at the right-bottom in the Window system tray. Click the Help button
on the left-bottom of the driver Configuration dialog box and the help file will pop up. Or
- Please see “Help\ Help.htm” in the Driver CD.
Hardware Installation
Front View of Back View of
USB Connector USB Connector
1. Plug in the dongle receiver connector into your available USB port
on PC.
2. Make sure the batteries of the keyboard and mouse are installed
correctly, please follow the polarity signs in the battery
compartment.
Pairing Procedure
The 5545URF kit can operate out of the box, you only have to pair
keyboard, mouse with the receiver when you use multiple 5545URF kits
within operating range of each other or when you experience
interference from other 2.4GHz radio devices.
The pairing button locates on the top of the dongle receiver with a LED
under to show the pairing or data reception status.
By pairing the Wireless kit’s keyboard, mouse with receiver it will:
- Generate a new digital ID, linking uniquely keyboard, mouse with
receiver. This lessens inference from nearby 5545URF kits operating
on the same channel.
- Allocate a new channel for keyboard or mouse. The active channel
can be seen in the driver configuration dialog box. This will let your
5545URF kit coexist with other 2.4GHz radio devices and nearby
5545URF kits.
1. Press the pairing button on the top of the receiver first. Receiver
LED will blink slowly indicating it’s ready to receive
keyboard/mouse pairing information.
2. Next, hold mouse or keyboard close to receiver and within next
60 seconds press the pairing button on the bottom of the mouse
and keyboard once.
3. The receiver LED will blink rapidly for some time to indicate it has
received pairing information.
4. The mouse and keyboard are now operational, if not please
repeat the above procedure.
5. The whole procedure should be completed within 60 seconds.
Note: Your PC must be turned on before doing this pairing procedure.
(+ )
(-)
(-)
(+ )
(-)
(+ )
Pairing button on the top o
f
the dongle receiver (With a
LED under the pairing
button)
Pairing button on the
bottom of the mouse
Pairing button on the bottom of the keyboard
Driver Installation
USB Device Driver
The USB device driver is included in Windows operating system.
During initial installation of the USB device, the system will automatically detect a new hardware being added, and then
bring up "Add New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this
installation step is completed the basic functions of the USB device will work under the operating system. The additional
functions are provided only after the KeyMaestro application is installed.
KeyMaestro Input Device Driver
1.
2.
3.
4.
Insert the CD labeled "KeyMaestro" into your CD-ROM.
The CD will run automatically and bring up the Setup dialogue box.
Follow the on-screen instruction to install the driver.
The driver icon will show at the right-bottom in the Windows system tray when the driver is loaded.
English
5545URF QIG 英文 3100506500 v1.0
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Emprex 8193URF Install Manual
-
-
-
-
-
-
-
-