Silvercrest 274344 Operating Instructions Manual

Type
Operating Instructions Manual

This manual is also suitable for

IAN 274344
ELECTRIC KNIFE SHARPENER SEMS 12 A1
ELECTRIC KNIFE SHARPENER
Operating instructions
ELEKTRISCHER MESSERSCHÄRFER
Bedienungsanleitung
ELEKTRISK KNIVSLIBER
Betjeningsvejledning
GB / IE Operating instructions Page 1
DK Betjeningsvejledning Side 15
DE / AT / CH Bedienungsanleitung Seite 29
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
B
A
GB
IE
 1
SEMS 12 A1
Contents
Introduction ...................................................2
Copyright ............................................................... 2
Limitation of liability ....................................................... 2
Intended use ............................................................ 2
Package contents ..............................................3
Disposal of packaging materials ............................................. 3
Description of the appliance .....................................3
Technical data .................................................4
Safety guidelines ..............................................5
Preparation ...................................................7
Sharpen knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Double-sided smooth grind ................................................. 8
Single-sided smooth grind ................................................. 10
Cleaning .....................................................12
Storage .....................................................13
Disposal .....................................................13
Warranty and service ..........................................14
Importer .....................................................14
2 
GB
IE
SEMS 12 A1
Introduction
Congratulations on the purchase of your new appliance!
You have decided in favour of a modern, high-quality product. These operating
instructions are part of this product. They contain important information on safety,
usage and disposal. Before using the product, familiarise yourself with all handling
and safety guidelines. This appliance may only be used as described and for the
purposes indicated. Please also pass these operating instructions on to any future
owner(s).
Copyright
This documentation is protected by copyright.
Any reproduction, or any reprint even in the form of excerpts, as well as the ren-
dition of figures even in modified form, is only permitted with the manufacturer’s
written consent.
Limitation of liability
All the technical information, data and instructions regarding installation, connection
and operation contained in these operating instructions corresponds to the latest
information available to us at the time of printing and takes our previous experience
and know-how into account.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to
observe these instructions, improper use, incompetent repairs, unauthorised
modifications or for the use of non-approved replacement parts.
Intended use
This appliance is exclusively intended for the sharpening of knives (made of
metal or ceramics) that are used in private households.
This appliance is intended solely for use in private households. Not for commer-
cial use!
GB
IE
 3
SEMS 12 A1
Package contents
The appliance is supplied with the following components as standard:
Electric Knife Sharpener
Mains adapter
Operating instructions
1) Remove all parts of the appliance and the operating instructions from the box.
2) Remove all packaging materials from the appliance.
NOTE
Check the package for completeness and for signs of visible damage.
If the delivery is not complete or has been damaged due to defective
packaging or transportation, contact the Service Hotline (see section
Warranty and Service).
Disposal of packaging materials
The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste which is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the original packaging of the appliance during the warranty
period so that the appliance can be packed properly for return shipment in
the event of a warranty claim.
Description of the appliance
Figure A:
Grinding openings for rough sharpening (sharpening base 1)
Grinding openings for fine sharpening (sharpening base 2)
Socket for mains adapter
On/Off switch
Figure B:
Mains adapter
Power plug
4 
GB
IE
SEMS 12 A1
Technical data
Appliance
Input voltage 12 V
Power consumption 12 W, (1.0 A)
Sharpening speed 3200 rotations/minute
CO time 2 minutes
The CO time (continuous operation time) is the amount of time an appliance can
be operated without the motor overheating and becoming damaged. When
the specified CO time has been reached, the appliance must be switched off
until the motor has cooled down to room temperature (approx. 20 minutes).
Mains adapter (LY012SPS-120108VH)
Manufacturer Iyangel
Input voltage 100 - 240 V ∼, 50 - 60 Hz
Current consumption 0.4 A
Output voltage 12 V
Output current 1.08 A
Protection class
II
GB
IE
 5
SEMS 12 A1
Safety guidelines
RISK OF ELECTRIC SHOCK
Protect the product from moisture. Only use it in dry rooms;
do not use outdoors or in moist environments.
Ensure that the power cable cannot be damaged during
use, in particular not from sharp blades.
To prevent accidents, have defective plugs and/or power
cables replaced immediately by an authorised specialist
technician or our Customer Service department.
Never open any housing parts.
NEVER submerse the appliance in water or other liquids!
Otherwise there is a risk of an electric shock.
After use or during absences, always remove the plug from
the mains power socket. Mains voltage is on the product for
as long as the mains plug is in the socket.
Ensure that the plug can be reached at all times in order to
be able to pull it out of the socket in case of danger.
The appliance may only be used with the original power
supply.
Use the mains adapter / the appliance only indoors.
6 
GB
IE
SEMS 12 A1
WARNING! RISK OF INJURY!
Check to ensure that the appliance is in a serviceable con-
dition before use. If there are visible damages, you may
not continue the use of the appliance. In that case, contact
customer service first to check the appliance for safety.
Ensure that no hair, loose clothing or body parts come into
contact with the rotating grinding stone.
Wear protective gloves to avoid injury from sharp blades.
This appliance should not be used by children.
The appliance should always be disconnected from the
mains when unattended and before assembly, disassembly
or cleaning.
The appliance and its connecting cable must be kept away
from children.
Children must not use the appliance as a plaything.
This appliance may be used by persons with limited physi-
cal, sensory or mental capabilities or lack of experience
and knowledge, provided that they are under supervision
or have been told how to use the appliance safely and are
aware of the potential risks.
Use the appliance only if the covers are fitted properly on
the grinding stones.
CAUTION – PROPERTY DAMAGE!
Do not use this appliance for wet sharpening.
Do not use this appliance for sharpening knives with serrated
edges or toothed blades. Sharpening would grind out the
serrated edges or the teeth and make the knife unusable.
GB
IE
 7
SEMS 12 A1
Preparation
1) Connect the plug of the mains adapter with the socket on the
appliance.
2) Place the appliance on a suitable and level surface.
3) Connect the mains adapter into a power socket.
4) Switch on the appliance using the On/Off switch .
NOTE
The knives you would like to sharpen must be free from dirt and food
residues!
Sharpen knives
CAUTION – PROPERTY DAMAGE!
Never exceed the maximum operating time of 2 minutes. Let the appliance
cool down for about 20 minutes after 2 minutes of operation, before using
it again.
Do not exert any firm pressure with the blade on the grinding stone – this
damages the blade and does not accelerate the sharpening process.
To sharpen knives with ceramic blades, use only sharpening base 2 .
8 
GB
IE
SEMS 12 A1
Double-sided smooth grind
For a double-sided grind, the blade of the knife is sharpened from both sides
toward the cutting edge. Smooth grind is characterised by the knife’s smooth
blade, meaning no waves or notches are ground in it.
NOTES ON THE HANDLING OF THE APPLIANCE
Prevent that the blade cuts into the plastic housing of the appliance when it
is pulled through.
Accidental cuts into the housing, however, do not compromise the functioning
of the appliance.
To sharpen knives with ceramic blades, use only sharpening base 2 .
For this purpose, follow the instructions starting from step 3).
Use the two slits of sharpening base 1 only for very dull knives. For this
purpose, follow the instructions starting from step 1).
1) Always hold the appliance with your left hand.
2) Hold the knife at the handle and pull the blade in a steady movement once
through the left and once through the right slit of sharpening base 1 .
Exert slight pressure when sharpening in the direction of the sharpening
stone to ensure even contact with the knife.
NOTE
Very dull knives might have to be pulled through more than once.
GB
IE
 9
SEMS 12 A1
NOTE
Use both slits of sharpening bases / equally frequently to achieve
even sharpening.
3) Hold the knife at the handle and now pull the blade in a steady movement
through the left and through the right slit of sharpening base 2 in alternation.
If necessary, pull the blade multiple times through both slits of sharpening
base 2 .
Normally, it is sufficient to pull the blade 2 times slowly (approx. 4 - 6 seconds)
and 2 times quickly (approx. 1 - 2 seconds) through both slits of sharpening
base 2 :
NOTE
Very dull knives might have to be pulled through more than once.
4) If you believe that the blade has reached the desired sharpness, test it on
a piece of cutting matter.
Be sure to clean the blade again before you might possibly re-sharpen it.
5) To re-sharpen the blade, pull it once more through the slits of sharpening
base 2 in alternation, until the desired sharpness is reached.
6) If you are satisfied with the result, turn the appliance off on the On/Off
switch .
7) Clean the blade thoroughly before you use the knife again, in order to
remove potential grinding residues such as metal dust or chips.
10 
GB
IE
SEMS 12 A1
Single-sided smooth grind
For a single-sided grind, one side of the blade runs perfectly straight toward the
cutting edge and the other side is angled up to the cutting edge of the knife. The
angled side is the sharpened side. The single-sided grind can either be smooth
or have small teeth as found on table knives. However, you should only sharpen
blades using a smooth grind with this appliance.
NOTICES ON HANDLING THE APPLIANCE
Prevent the blade from cutting into the plastic housing of the appliance
when it is pulled through.
Accidental cuts into the housing do not compromise the function of the
appliance.
Use the sharpening base 1 only for very dull knives. For this purpose,
follow the instructions starting from step 1).
If knives have a one-sided grind, sharpen only the side of the blade with
the grind. Use either only the right or only the left slit in sharpening base 1
/2 – depending on which side the knife's blade is ground
.
To sharpen knives with ceramic blades, use only sharpening base 2 .
1) Always hold the appliance with your left hand.
2) Hold the knife by the handle and pull the blade in a steady movement
once through the left-hand or once through the right-hand slit in sharpening
base1 .
Depending on which side of the blade is ground, exert slight pressure when
sharpening in the direction of the sharpening stone to ensure even contact
with the knife.
NOTE
Very dull knives might have to be pulled through more than once.
GB
IE
 11
SEMS 12 A1
or
3) Hold the knife at the handle and pull the blade in a steady movement
through the left-hand or through the right-hand slit in sharpening base 2 .
Depending on which side of the blade is ground, pull the blade multiple
times through the slit in sharpening base 2 if necessary.
Normally, it is sufficient to pull the blade twice slowly (approx. 4 - 6 seconds)
and twice quickly (approx. 1 - 2 seconds) through both slits of sharpening
base 2 :
or
12 
GB
IE
SEMS 12 A1
NOTE
Very dull knives might have to be pulled through more than once.
4) If you believe that the blade has reached the desired sharpness, test it on a
piece of cutting matter.
Be sure to clean the blade again before you re-sharpen it if necessary.
5) To re-sharpen the blade, pull it once more through the slit of sharpening base
2 , until the desired sharpness is reached.
6) Once you are satisfied with the result, turn the appliance off using the On/
Off switch .
7) Before using the knife, clean the blade thoroughly in order to remove poten-
tial grinding residues such as metal dust or chips.
Cleaning
RISK OF ELECTRIC SHOCK
First, pull out the mains adapter from the socket and pull out plug
from socket , before you clean the appliance.
NEVER submerse the appliance in water or other liquids!
Otherwise there is a risk of an electric shock.
CAUTION – PROPERTY DAMAGE!
Do not use aggressive or abrasive cleaning agents. These can damage the
surfaces of the appliance.
Clean the housing using only a dry or lightly moistened cloth. For stubborn
soiling use a mild detergent on the cloth.
Wipe off the mains adapter with a damp cloth. Ensure that the appliance
and the mains adapter are completely dry before using the appliance
again.
GB
IE
 13
SEMS 12 A1
In case of frequent use, grinding dust and metal residues might settle on the
grinding stones on the inside.
Clean the grinding stones as follows:
Hold one finger against the wide end of the black protective caps of
sharpening bases / and press down against the short end at
the same time. Lift off the protective caps of sharpening bases /
simultaneously.
Clean the now visible grinding stones using a brush or similar.
Fit the two black protective caps / back on. Ensure that you do not
confuse the protective caps.
Storage
Clean the appliance as described in the section “Cleaning”.
Remove the mains adapter from the appliance.
Store the appliance and the mains adapter in a clean and dry location.
Disposal
Never dispose of the appliance in normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please observe applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Do not dispose of the mains adapter in your normal domestic
waste. This product is subject to the provisions of European
Directive 2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the mains adapter through an approved disposal centre or at your
community waste facility. Please comply with all applicable regulations. Please
contact your waste disposal facility if you are in any doubt.
14 
GB
IE
SEMS 12 A1
Warranty and service
The warranty for this appliance is for 3 years from the date of purchase.
The appliance has been manufactured with care and meticulously examined
before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim,
please make contact by telephone with our Customer Service Department.
Only in this way can a post-free despatch for your goods be assured.
NOTICE
The warranty covers only claims for material and manufacturing defects,
but not for transport damage, wearing parts or for damage to fragile
components, e.g. buttons or batteries.
This product is for domestic use only and is not intended for commercial use.
The warranty is void in the case of abusive and improper handling, use of force
and internal tampering not carried out by our authorised service branch.
Your statutory rights are not restricted in any way by this warranty. The warranty
period is not extended by repairs made under the warranty. This applies also to
replaced and repaired parts.
Damages and defects extant at the time of purchase must be reported immedi-
ately after unpacking, resp. no later than two days after the date of purchase.
Repairs made after the lapse of the warranty period are subject to charge.
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
IAN 274344
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
IAN 274344
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
DK 15
SEMS 12 A1
Indholdsfortegnelse
Introduktion .................................................16
Ophavsret ............................................................. 16
Ansvarsbegrænsning ..................................................... 16
Anvendelsesområde .....................................................16
Pakkens indhold ..............................................17
Bortskaffelse af emballagen ...............................................17
Beskrivelse af produktet .......................................17
Tekniske data ................................................18
Sikkerhedsanvisninger .........................................19
Forberedelse .................................................21
Slibning af knive .............................................21
Dobbeltsidet glatslibning ..................................................22
Ensidig glatslibning ......................................................24
Rengøring ...................................................26
Opbevaring ..................................................27
Bortskaffelse .................................................27
Garanti og service ............................................28
Importør ....................................................28
16 DK
SEMS 12 A1
Introduktion
Til lykke med købet af dit nye produkt!
Du har valgt et moderne produkt af høj kvalitet. Betjeningsvejledningen er en del
af dette produkt. Den indeholder vigtige informationer om sikkerhed, anvendelse
og bortskaffelse. Du bør sætte dig ind i alle produktets betjenings- og sikkerheds-
anvisninger før brug. Brug kun produktet som beskrevet og kun til de angivne
anvendelsesområder. Lad vejledningen følge med produktet, hvis du giver det
videre til andre.
Ophavsret
Denne dokumentation er ophavsretligt beskyttet.
Enhver kopiering eller eftertryk – også i uddrag – samt videregivelse af billeder –
også i ændret form – er kun tilladt efter skriftligt samtykke fra producenten.
Ansvarsbegrænsning
Alle tekniske informationer, data og anvisninger for tilslutning og betjening i den-
ne betjeningsvejledning svarer til den nyeste viden på trykketidspunktet og gives
efter bedste overbevisning i henhold til vores hidtidige erfaringer og viden.
Der kan ikke stilles nogen form for krav baseret på informationerne, billederne og
beskrivelserne i denne vejledning.
Producenten påtager sig intet ansvar for skader, der skyldes manglende overhol-
delse af vejledningen, anvendelse, som ikke hører ind under anvendelsesområdet,
forkerte reparationer, ændringer, som er foretaget uden tilladelse samt anvendelse
af ikke-tilladte reservedele.
Anvendelsesområde
Dette produkt er udelukkende beregnet til slibning af knive (af metal eller keramik)
i private husholdninger.
Dette produkt er udelukkende beregnet til anvendelse i private husholdninger.
Brug ikke produktet til erhvervsmæssige formål!
DK 17
SEMS 12 A1
Pakkens indhold
Produktet leveres som standard med følgende dele:
Elektrisk knivsliber
Netadapter
Betjeningsvejledning
1) Tag alle delene samt betjeningsvejledningen ud af kassen.
2) Fjern alle emballeringsmaterialer fra produktet.
BEMÆRK
Kontrollér at alle dele er leveret med, og at de ikke har synlige skader.
Hvis der mangler dele, eller hvis nogle af delene er defekte på grund af
mangelfuld emballage eller på grund af transporten, bedes du henvende
dig til service-hotline (se kapitel Garanti og service).
Bortskaffelse af emballagen
Emballagen beskytter produktet mod transportskader. Emballagematerialerne er
valgt ud fra kriterier som miljøforligelighed og bortskaffelsesteknik og kan derfor
genbruges.
Aflevering af emballagen til genbrug sparer råstoffer og reducerer affaldsmæng-
den. Bortskaf emballagematerialer, du ikke skal bruge mere, efter de lokalt
gældende forskrifter.
BEMÆRK
Opbevar den originale emballage i løbet af produktets garantiperiode,
hvis det er muligt, så du kan pakke det ordentligt ind, hvis du skal gøre
brug af garantien.
Beskrivelse af produktet
Figur A:
Slibeåbninger til grovslibning (slibesokkel 1)
Slibeåbninger til finslibning (slibesokkel 2)
Stik til netadapter
Tænd-/slukknap
Figur B:
Netadapter
Stik
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Silvercrest 274344 Operating Instructions Manual

Type
Operating Instructions Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages