Lucent Technologies MAX 3000 Configuration manual

MAX 6000/3000 Network

Configuration Guide

Part Number: 7820-0629-002

For software version 8.0.1

March 2000

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in any fashion by any

entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or licensing, without the express

written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to [email protected].

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is subject to change.

Security Statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

MAX 6000, MAX 3000 are trademarks of Lucent Technologies. Other trademarks and trade names mentioned in this publication belong to their respective

owners.

Ordering Information

You can order the most up-to-date product information and computer-based training online at http://www.lucent.com/ins/bookstore.

Feedback

Lucent Technologies appreciates your comments, either positive or negative, about this manual. Please send them to [email protected].

MAX 6000/3000 Network Configuration Guide iii

Customer Service

Customer Service provides a variety of options for obtaining information about Lucent

products and services, software upgrades, and technical assistance.

Finding information and software on the Internet

Visit the Web site at http://www.lucent.com/ins for technical information, product

information, and descriptions of available services.

Visit the FTP site at ftp://ftp.ascend.com for software upgrades, release notes, and

addenda.

Obtaining technical assistance

You can obtain technical assistance by telephone, email, fax, modem, or regular mail, as well

as over the Internet.

Gathering information you will need

If you need to contact Lucent for help with a problem, make sure that you have the following

information when you call or that you include it in your correspondence:

• Product name and model

• Software and hardware options

• Software version

• If supplied by your carrier, Service Profile Identifiers (SPIDs) associated with your line

• Your local telephone company’s switch type and operating mode, such as AT&T 5ESS

Custom or Northern Telecom National ISDN-1

• Whether you are routing or bridging with your Lucent product

• Type of computer you are using

• Description of the problem

Calling Lucent from within the United States

In the U.S., you can take advantage of Priority Technical Assistance or an Advantage service

contract, or you can call to request assistance.

Priority Technical Assistance

If you need to talk to an engineer right away, call (900) 555-2763 to reach the Priority Call

queue. The charge of $2.95 per minute does not begin to accrue until you are connected to an

engineer. Average wait times are less than 3 minutes.

Advantage Services

Advantage Services is a comprehensive selection of services. Installation services help get

your Lucent Wide Area Network (WAN) off to the right start. Ongoing maintenance and

iv MAX 6000/3000 Network Configuration Guide

support services provide hardware and software solutions to keep your network operating at

peak performance. For more information, call (800) 272-3634.

Other telephone numbers

For a menu of Lucent’s services, call (800) 272-3634. Or call (510) 769-6001 for an operator.

Calling Lucent from outside the United States

You can contact Lucent by telephone from outside the United States at one of the following

numbers:

For the Asia-Pacific region, you can find additional support resources at

http://www.lucent.com/ins/international/apac/.

Obtaining assistance through correspondence

Send your technical support questions to one of the following email addresses, or correspond

by fax, BBS, or regular mail with Customer Service in Lucent’s U.S. offices in Alameda, CA:

• Email from within the U.S.—[email protected]

• Email from Europe, the Middle East, or Africa—EMEAsupport@ascend.com

• Email from the Asia-Pacific region—[email protected]

• Fax—(510) 814-2312

• Customer Support BBS (by modem)—(510) 814-2302

• Write to Lucent at the following address:

Attn: Customer Service

Lucent Technologies

1701 Harbor Bay Parkway

Alameda, CA 94502-3002

USA

Telephone outside the United States (510) 769-8027

Austria/Germany/Switzerland

(+33) 492 96 5672

Benelux

(+33) 492 96 5674

France

(+33) 492 96 5673

Italy

(+33) 492 96 5676

Japan

(+81) 3 5325 7397

Middle East/Africa

(+33) 492 96 5679

Scandinavia

(+33) 492 96 5677

Spain/Portugal

(+33) 492 96 5675

UK

(+33) 492 96 5671

MAX 6000/3000 Network Configuration Guide v

Contents

Customer Service..................................................................................................................... iii

About This Guide........................................................................... xxv

How to use this guide............................................................................................................. xxv

What you should know ......................................................................................................... xxvi

Documentation conventions................................................................................................ xxvii

MAX 6000/3000 Series documentation set....................................................................... xxviii

Chapter 1 Introduction..................................................................................... 1-1

Chapter 2 Configuration Concepts and Profiles ........................................... 2-1

Using the MAX as an ISP or telecommuting hub.................................................................. 2-1

Using the MAX as an ISP hub........................................................................................ 2-1

Using the MAX as a telecommuting hub........................................................................ 2-2

Overview of MAX configuration........................................................................................... 2-3

Creating a network diagram............................................................................................ 2-4

Configuring lines, slots, and ports for WAN access....................................................... 2-4

Configuring WAN connections and security.................................................................. 2-4

Concentrating Frame Relay connections........................................................................ 2-5

Enabling X.25 terminal connections............................................................................... 2-5

Configuring routing and bridging across the WAN........................................................ 2-5

Enabling protocol-independent packet bridging...................................................... 2-5

Using IPX routing (NetWare 3.11 or later)............................................................. 2-6

IP routing................................................................................................................. 2-6

Configuring Internet services.......................................................................................... 2-6

Multicast.................................................................................................................. 2-6

OSPF routing........................................................................................................... 2-6

Virtual Private Networks......................................................................................... 2-6

MAX profiles......................................................................................................................... 2-7

Obtaining privileges to use the profiles.......................................................................... 2-7

Activating a profile......................................................................................................... 2-7

Saving a profile............................................................................................................... 2-8

Using RADIUS............................................................................................................... 2-8

Using session accounting................................................................................................ 2-9

Where to go next.................................................................................................................... 2-9

Chapter 3 Configuring WAN Access............................................................... 3-1

Introduction to WAN configuration....................................................................................... 3-2

How the VT100 menus relate to slots and ports on the MAX 6000............................... 3-2

System slot............................................................................................................... 3-2

T1 or E1 slots........................................................................................................... 3-2

vi MAX 6000/3000 Network Configuration Guide

Contents

Expansion slots........................................................................................................ 3-3

Ethernet and WAN slots.......................................................................................... 3-3

How the VT100 menus relate to slots and ports on the MAX 3000............................... 3-3

System slot............................................................................................................... 3-4

T1 or E1 slot ............................................................................................................ 3-4

Expansion slots........................................................................................................ 3-4

Ethernet slot............................................................................................................. 3-4

Etherdata slot........................................................................................................... 3-4

Serial WAN slot....................................................................................................... 3-4

V.90 S56 III modem slot ......................................................................................... 3-4

Assigning telephone numbers......................................................................................... 3-5

Add-on numbers ...................................................................................................... 3-5

Hunt groups ............................................................................................................. 3-6

SPIDS (for Net/BRI lines)....................................................................................... 3-6

How a MAX unit routes inbound and outbound calls .................................................... 3-6

Configuring T1 lines.............................................................................................................. 3-7

Setting the general parameters........................................................................................ 3-7

Connecting to the Central Office switch......................................................................... 3-8

Signaling mode........................................................................................................ 3-8

Switch-specific settings........................................................................................... 3-9

Front-end settings.................................................................................................... 3-9

Monitoring line quality................................................................................................... 3-9

Supporting PBX connections.......................................................................................... 3-9

Configuring carrier-specific services............................................................................ 3-10

Using MAXDAX.......................................................................................................... 3-10

Configuring channels.................................................................................................... 3-11

Associating a channel with a slot/port in the MAX unit ....................................... 3-12

Assigning nailed channels to groups ..................................................................... 3-12

Assigning channels to trunk groups....................................................................... 3-12

Assigning channels to hunt groups........................................................................ 3-12

Typical T1 configurations, with examples ................................................................... 3-12

Configuring a line for ISDN PRI service .............................................................. 3-12

Configuring robbed-bit signaling .......................................................................... 3-15

Using NFAS signaling........................................................................................... 3-15

Enabling a robbed-bit PBX with PRI access lines (PRI-to-T1 conversion).......... 3-17

Assigning bandwidth to a nailed link.................................................................... 3-18

Performing T1 line diagnostics..................................................................................... 3-19

Configuring E1 lines............................................................................................................3-19

Setting the general parameters...................................................................................... 3-20

Connecting to the Central Office switch....................................................................... 3-20

Signaling mode...................................................................................................... 3-20

Switch-specific settings......................................................................................... 3-21

Defining how the MAX unit responds during call setup.............................................. 3-21

Defining settings for DPNSS or DASS 2 switches....................................................... 3-22

L3 End and L2 End parameters............................................................................. 3-22

NLValue and LoopAvoidance parameters ............................................................ 3-22

Enabling a line for Clock Source use............................................................................ 3-23

Setting triggers for call-completed information............................................................ 3-23

Configuring channels.................................................................................................... 3-23

Associating a channel with a slot/port in the MAX unit ....................................... 3-24

Assigning nailed channels to groups ..................................................................... 3-24

Assigning channels to hunt groups........................................................................ 3-24

Contents

MAX 6000/3000 Network Configuration Guide vii

Typical E1 configurations, with examples ................................................................... 3-25

Using ISDN signaling............................................................................................ 3-25

Using DPNSS signaling......................................................................................... 3-25

Setting up a nailed connection............................................................................... 3-26

Performing E1 line diagnostics..................................................................................... 3-27

Network Terminating (NT) support for European ISDN PRI...................................... 3-27

ISDN call information .................................................................................................. 3-27

Configuring the serial WAN port......................................................................................... 3-28

Configuring a serial WAN connection ......................................................................... 3-28

Example of a serial WAN connection................................................................... 3-28

Configuring digital modems ................................................................................................ 3-29

56K modem numbering ................................................................................................ 3-29

8-MOD modem numbering................................................................................... 3-29

12-MOD modem numbering ................................................................................. 3-30

Parameters for configuring digital modems.................................................................. 3-30

Quiescing digital modems and returning them to service............................................. 3-31

Sample configuration.................................................................................................... 3-31

Configuring V.110 modems................................................................................................. 3-32

Routing calls to the V.110 modems.............................................................................. 3-32

Example of a V.110 configuration................................................................................ 3-32

Configuring Personal Handyphone System (PHS).............................................................. 3-33

Configuring ISDN BRI network cards................................................................................. 3-33

Specifying a name and other settings for the profile.................................................... 3-34

Setting a line’s basic operational parameters................................................................ 3-34

Configuring the B channels .......................................................................................... 3-35

BN Slot and BN Prt/Grp parameters...................................................................... 3-35

BN Trnk Grp parameter......................................................................................... 3-35

Configuring add-on numbers and SPIDs...................................................................... 3-36

Typical Net/BRI configurations, with examples .......................................................... 3-36

Configuring incoming switched connections ........................................................ 3-36

Configuring the Net/BRI line for outbound calls.................................................. 3-37

Displaying information about BRI calls................................................................ 3-38

Configuring Host/BRI lines................................................................................................. 3-39

Typical Host/BRI configurations, with examples......................................................... 3-40

Routing inbound calls to the terminating device................................................... 3-40

Enabling the device to make outbound calls ......................................................... 3-40

Configuring local BRI-to-BRI calls ...................................................................... 3-41

Configuring IDSL connections............................................................................................ 3-42

BN Slot and BN Prt/Grp parameters............................................................................. 3-43

Example of IDSL configuration ................................................................................... 3-44

BRI/LT diagnostics....................................................................................................... 3-44

Configuring IDSL voice-call support........................................................................... 3-44

Configuring the MAX IDSL card for outgoing voice calls................................... 3-45

Configuring the MAX to route incoming voice calls to the IDSL card ................ 3-45

Performing loopback diagnostics for IDSL........................................................... 3-46

Configuring Host/AIM6 and Host/Dual ports ..................................................................... 3-47

Configuring the AIM port............................................................................................. 3-48

Configuring a Port Config profile ......................................................................... 3-49

Port diagnostics...................................................................................................... 3-50

Configuring the interface to the codec.......................................................................... 3-50

Pairing ports for dual-port calls............................................................................. 3-51

Enabling dual-port calls......................................................................................... 3-51

viii MAX 6000/3000 Network Configuration Guide

Contents

Configuring WAN connections between serial hosts................................................... 3-52

Configuring bandwidth parameters .............................................................................. 3-53

Configuring an AIM call............................................................................................... 3-54

Example of an AIM call configuration.................................................................. 3-55

Configuring the FT1-B&O call .................................................................................... 3-55

Configuring a single-channel call................................................................................. 3-56

Example of configuring a single-channel call....................................................... 3-57

Configuring a dual-port call.......................................................................................... 3-57

Configuring call routing....................................................................................................... 3-58

Routing inbound calls................................................................................................... 3-58

Setting up ISDN subaddressing.................................................................................... 3-58

Specifying answer numbers for destination host ports................................................. 3-59

Specifying host ports’ slot and port numbers in WAN channel configurations........... 3-60

Exclusive port routing................................................................................................... 3-61

Using DNIS-related methods to limit incoming calls................................................... 3-61

Overview ............................................................................................................... 3-61

Call routing............................................................................................................ 3-61

Limiting calls to specific dialed numbers.............................................................. 3-62

Limiting calls to unspecified dialed numbers........................................................ 3-63

Examples of call routing........................................................................................ 3-63

Incoming call routing state diagram...................................................................... 3-65

Routing outbound calls................................................................................................. 3-68

Enabling trunk groups ........................................................................................... 3-68

Dialing through trunk group 2 (local port-to-port calls)........................................ 3-69

Dialing through trunk group 3 (Destination profiles)............................................ 3-69

Dialing through trunk groups 4–9 ......................................................................... 3-70

Dialing through the extended dial plan.................................................................. 3-71

Matching slot and port specifications (reserved channels).................................... 3-72

Configuring MAXDAX................................................................................................ 3-73

Introduction ........................................................................................................... 3-73

How the MAX determines outbound call routing ................................................. 3-73

MAXDAX call-routing flowchart ......................................................................... 3-74

Configuring channels on which the MAX unit sends outgoing calls.................... 3-76

Configuring channels on which the MAX unit receives calls............................... 3-76

Configuring the MAX unit to use Answer Plan profiles....................................... 3-80

Displaying MAXDAX configurations................................................................... 3-80

Examples of MAXDAX configuration.................................................................. 3-82

Chapter 4 Configuring Individual WAN Connections.................................... 4-1

Introduction to WAN links .................................................................................................... 4-2

The Answer profile ................................................................................................................ 4-3

Encaps Options............................................................................................................... 4-4

IP Options....................................................................................................................... 4-6

IPX Options .................................................................................................................... 4-6

AppleTalk Options.......................................................................................................... 4-6

PPP Options.................................................................................................................... 4-7

Foundation parameters ............................................................................................ 4-7

Numeric parameters................................................................................................. 4-8

Graceful shutdown and IPX Header Compression.................................................. 4-9

COMB Options............................................................................................................... 4-9

V.120 Options................................................................................................................. 4-9

X.75 Options................................................................................................................... 4-9

Contents

MAX 6000/3000 Network Configuration Guide ix

PAD Options................................................................................................................. 4-10

T3POS Options............................................................................................................. 4-11

Timer Options........................................................................................................ 4-11

For DTE-initiated calls.......................................................................................... 4-12

Miscellaneous........................................................................................................ 4-13

Session Options............................................................................................................. 4-13

Filter-related parameters........................................................................................ 4-14

Timing parameters................................................................................................. 4-14

Miscellaneous Session Options parameters........................................................... 4-14

DHCP Options.............................................................................................................. 4-15

TCP-Clear Options ....................................................................................................... 4-15

Configuring an Answer profile .................................................................................... 4-16

Example of a configured an Answer profile.......................................................... 4-16

The Connection profile ........................................................................................................ 4-17

General Parameters....................................................................................................... 4-17

Basic setup parameters .......................................................................................... 4-17

Telephone numbers................................................................................................ 4-18

Routing .................................................................................................................. 4-18

Overview of the Options subprofiles............................................................................ 4-19

Encaps Options............................................................................................................. 4-20

Encaps=MPP ......................................................................................................... 4-20

Encaps=MP............................................................................................................ 4-23

Encaps=PPP........................................................................................................... 4-23

Encaps=COMB...................................................................................................... 4-24

Encaps=FR and Encaps=FR_CIR ......................................................................... 4-24

Encaps=X25/PAD ................................................................................................. 4-25

Encaps=X25/T3POS.............................................................................................. 4-26

Encaps=X25/IP...................................................................................................... 4-27

Encaps=X.32.......................................................................................................... 4-28

Encaps=TCP-Clear................................................................................................ 4-28

Encaps=ARA......................................................................................................... 4-30

IP Options..................................................................................................................... 4-30

Distance parameters............................................................................................... 4-30

SourceIP Check, RIP and Pool parameters ........................................................... 4-31

Multicast parameters.............................................................................................. 4-32

Client parameters................................................................................................... 4-32

IPX Options .................................................................................................................. 4-32

IPX parameters...................................................................................................... 4-33

AppleTalk Options........................................................................................................ 4-34

Session Options............................................................................................................. 4-35

Timing parameters................................................................................................. 4-35

Miscellaneous Session Options parameters........................................................... 4-35

Frame Relay parameters........................................................................................ 4-36

Framed Only.......................................................................................................... 4-36

OSPF Options............................................................................................................... 4-37

Authentication parameters..................................................................................... 4-37

More OSPF parameters ......................................................................................... 4-38

Telco Options................................................................................................................ 4-38

Group, FT1 Caller, Data Svc, Force 56 parameters .............................................. 4-39

Bill #, Call-by-Call, Transit #, NAS Port Type parameters .................................. 4-39

Accounting Options...................................................................................................... 4-40

DHCP options............................................................................................................... 4-41

x MAX 6000/3000 Network Configuration Guide

Contents

Configuring a Connection profile.......................................................................... 4-41

Example of setting time limits............................................................................... 4-42

Configuring Names/Passwords profiles............................................................................... 4-42

Example of a Names/Passwords profile configuration................................................. 4-42

Configuring PPP connections .............................................................................................. 4-43

Example of a single-channel PPP connection............................................................... 4-43

Settings in a RADIUS profile....................................................................................... 4-44

Example of a PPP connection....................................................................................... 4-45

Enabling PPP dial-out for V.110 modems.................................................................... 4-46

Configuring MP, MP+ and BACP connections................................................................... 4-46

The MP and BACP parameters..................................................................................... 4-47

MP without BACP................................................................................................. 4-48

Enabling BACP for MP Connections.................................................................... 4-48

Specifying channel counts..................................................................................... 4-48

Dynamic algorithm for calculating bandwidth requirements................................ 4-48

Time period for calculating average line utilization.............................................. 4-49

Target utilization.................................................................................................... 4-49

Adding or dropping links (Add Pers, Sub Pers, Inc Ch Count, Dec Ch Count).... 4-49

Guidelines for configuring bandwidth criteria ...................................................... 4-49

Settings in a RADIUS profile....................................................................................... 4-49

Example of a MP connection without BACP............................................................... 4-50

Example of a MP connection with BACP .................................................................... 4-51

Configuring Lucent MP+ connections.......................................................................... 4-52

The MP+ parameters..................................................................................................... 4-53

Channel counts and bandwidth allocation parameters .......................................... 4-53

Auxiliary password for added channels................................................................. 4-53

Bandwidth monitoring........................................................................................... 4-53

Settings in a RADIUS profile....................................................................................... 4-53

Example of MP+ configuration .................................................................................... 4-54

Configuring a nailed/MP+ connection.......................................................................... 4-56

Configuring a Connection profile.......................................................................... 4-56

Settings in a RADIUS profile................................................................................ 4-56

Spanning multichannel calls across a stack of units..................................................... 4-57

How MP/MP+ call spanning works....................................................................... 4-57

Performance considerations for MAX stacking .................................................... 4-59

The stacking parameters........................................................................................ 4-62

Configuring a MAX stack ..................................................................................... 4-63

Disabling a MAX stack ......................................................................................... 4-64

Adding and removing a MAX............................................................................... 4-64

Configuring bidirectional CHAP support ............................................................................ 4-64

Overview....................................................................................................................... 4-64

Configuring bidirectional CHAP on the MAX unit...................................................... 4-64

Setting up bidirectional CHAP on the MAX unit for all incoming calls .............. 4-64

Setting up bidirectional CHAP on the MAX unit for selected incoming calls...... 4-65

Setting up bidirectional CHAP on the MAX unit for outgoing calls .................... 4-66

Configuring bidirectional CHAP in RADIUS.............................................................. 4-67

Setting up bidirectional CHAP in RADIUS for incoming calls............................ 4-67

Setting up bidirectional CHAP in RADIUS for outgoing calls............................. 4-68

Setting up selective bidirectional CHAP with callback......................................... 4-69

Setting up an outgoing call with double RADIUS lookups................................... 4-70

Enhanced support for MS-CHAP ........................................................................................ 4-72

LAN Manager MS-CHAP support ............................................................................... 4-72

Contents

MAX 6000/3000 Network Configuration Guide xi

RADIUS support for MS-CHAP.................................................................................. 4-72

Configuring dial-in PPP for AppleTalk............................................................................... 4-73

Configuring an AppleTalk PPP connection with a Connection profile........................ 4-73

Configuring an AppleTalk PPP connection with a Names/Passwords profile............. 4-73

Configuring AppleTalk connections from RADIUS........................................................... 4-75

Configuring ARA connections............................................................................................. 4-75

Example of an ARA configuration............................................................................... 4-75

Example of ARA configuration that enables IP access................................................ 4-75

Configuring terminal-server connections............................................................................. 4-77

Connection authentication issues.................................................................................. 4-78

Analog modems and async PPP connection.......................................................... 4-78

V.120 terminal adapters and PPP connections...................................................... 4-78

V.120 terminal adapters with PPP turned off........................................................ 4-78

Modem connections...................................................................................................... 4-78

V.120 terminal-adapter connections............................................................................. 4-79

TCP-Clear connections................................................................................................. 4-80

Settings in a RADIUS profile................................................................................ 4-81

TCP-modem connections (DNIS Login)............................................................... 4-82

The terminal-server interface........................................................................................ 4-83

Terminal mode....................................................................................................... 4-83

Menu mode............................................................................................................ 4-83

Immediate mode.................................................................................................... 4-83

Enabling terminal-server calls and setting security............................................... 4-83

The modem parameters................................................................................................. 4-84

Example of a modem configuration.............................................................................. 4-84

Configuring terminal mode........................................................................................... 4-85

Example of terminal-mode configuration.............................................................. 4-86

Configuring immediate mode....................................................................................... 4-86

Example of immediate-mode configuration.......................................................... 4-87

Configuring menu mode............................................................................................... 4-87

Example of menu-mode configuration.................................................................. 4-87

Configuring PPP mode ................................................................................................. 4-88

Example of PPP configuration .............................................................................. 4-88

Configuring Serial Line IP (SLIP) mode...................................................................... 4-89

Example of SLIP configuration............................................................................. 4-89

Configuring dial-out options......................................................................................... 4-89

Example of dial-out configuration......................................................................... 4-91

Configuring a Combinet connection.................................................................................... 4-91

The Combinet bridging parameters .............................................................................. 4-92

Specifying the hardware address of the remote Combinet bridge......................... 4-92

Enabling bridging.................................................................................................. 4-92

Requiring a password from the remote bridge ...................................................... 4-92

Specifying passwords to exchange with the remote bridge................................... 4-92

Configuring line-integrity monitoring................................................................... 4-92

Base channel count................................................................................................ 4-92

Compression.......................................................................................................... 4-93

Example of Combinet configuration............................................................................. 4-93

Configuring EU connections................................................................................................ 4-93

The EU parameters ....................................................................................................... 4-94

EU-RAW and EU-UI............................................................................................. 4-94

Maximum Receive Unit (MRU)............................................................................ 4-94

DCE address (DCE Addr) ..................................................................................... 4-94

xii MAX 6000/3000 Network Configuration Guide

Contents

DTE address (DTE Addr)...................................................................................... 4-94

Example of an EU connection...................................................................................... 4-95

Example of an EU-UI connection................................................................................. 4-96

Configuring DHCP services................................................................................................. 4-96

How the MAX assigns IP addresses............................................................................. 4-97

Plug and Play......................................................................................................... 4-97

Reserved address ................................................................................................... 4-97

Lease renewal ........................................................................................................ 4-97

Assignment from a pool ........................................................................................ 4-97

Configuring DHCP services ......................................................................................... 4-97

Setting up a DHCP server...................................................................................... 4-99

Setting up Plug and Play support........................................................................... 4-99

Setting up DHCP spoofing.................................................................................. 4-100

Chapter 5 Configuring Frame Relay............................................................... 5-1

Introduction............................................................................................................................ 5-1

Frame Relay link management....................................................................................... 5-2

Using the MAX as a Frame Relay concentrator............................................................. 5-2

Using the MAX as a Frame Relay switch....................................................................... 5-3

Components of a Frame Relay configuration................................................................. 5-3

Configuring nailed bandwidth for Frame Relay .................................................................... 5-4

Defining Frame Relay link operations................................................................................... 5-4

Dialing, billing and signaling parameters................................................................ 5-5

Link parameters....................................................................................................... 5-6

Timers and event count parameters......................................................................... 5-6

Settings in a Frame Relay profile ................................................................................... 5-7

Settings in a RADIUS frdlink profile............................................................................. 5-7

Examples of a UNI-DTE link interface.......................................................................... 5-9

Examples of a UNI-DCE link interface........................................................................ 5-10

Examples of an NNI link interface............................................................................... 5-12

Configuring a DLCI logical interface.................................................................................. 5-13

Overview of DLCI interface settings............................................................................ 5-13

Settings in a Connection profile ............................................................................ 5-13

The Frame Relay connection parameters .............................................................. 5-14

Settings in a RADIUS profile................................................................................ 5-15

Examples of a DLCI interface configuration................................................................ 5-16

Examples of backup interfaces for nailed Frame Relay links ...................................... 5-17

Concentrating incoming calls onto Frame Relay................................................................. 5-19

Setting up a Frame Relay gateway ............................................................................... 5-19

Routing parameters in the DLCI profile................................................................ 5-19

Routing parameters in RADIUS............................................................................ 5-20

Examples of a gateway configuration ................................................................... 5-20

Configuring Frame Relay Direct .................................................................................. 5-21

Settings in a Connection profile ............................................................................ 5-21

Settings in a RADIUS profile................................................................................ 5-22

Examples of FR Direct connections...................................................................... 5-23

Configuring the MAX as a Frame Relay switch.................................................................. 5-25

Overview of circuit-switching options ......................................................................... 5-25

Settings in a Connection profile ............................................................................ 5-25

Settings in a RADIUS profile................................................................................ 5-26

Examples of a circuit between UNI interfaces ............................................................. 5-26

Using local profiles................................................................................................ 5-26

Contents

MAX 6000/3000 Network Configuration Guide xiii

Using RADIUS profiles......................................................................................... 5-27

Examples of a circuit between NNI interfaces ............................................................. 5-28

Using local profiles................................................................................................ 5-28

Using RADIUS profiles......................................................................................... 5-29

Examples of circuits that use UNI and NNI interfaces................................................. 5-30

Using local profiles................................................................................................ 5-30

Using RADIUS profiles......................................................................................... 5-32

Configuring switched Frame Relay connections................................................................. 5-33

Overview....................................................................................................................... 5-33

Configuring a switched Frame Relay connection......................................................... 5-34

Configuring a Frame Relay profile........................................................................ 5-34

Configuring a Connection profile.......................................................................... 5-35

Configuring the Answer profile............................................................................. 5-35

Establishing the connection................................................................................... 5-36

Configuring 64 switched Frame Relay connections............................................................ 5-36

Examples of RADIUS switched Frame Relay connections.......................................... 5-36

Sample RADIUS Frame Relay Data Link profile................................................. 5-36

Sample RADIUS DNIS profile ............................................................................. 5-36

Sample RADIUS CLID profile ............................................................................. 5-37

Configuring a switched Frame Relay connection for an outbound call ....................... 5-37

Sample RADIUS Route profile............................................................................. 5-37

Sample RADIUS Frame Relay Data Link profile................................................. 5-38

Sample RADIUS user profile................................................................................ 5-38

Chapter 6 Configuring X.25............................................................................. 6-1

Introduction to Lucent X.25 implementation......................................................................... 6-2

Configuring the logical link to an X.25 network................................................................... 6-2

Dialing, billing and signaling parameters................................................................ 6-3

LAPB parameters .................................................................................................... 6-3

X.25 profile parameters........................................................................................... 6-4

X.121 and VCE Timer Val parameters ................................................................... 6-6

Example of an X.25 profile configuration...................................................................... 6-6

Configuring X.25 IP connections........................................................................................... 6-8

Max Unsucc. calls, Inactivity Timer, and MRU parameters .......................................... 6-9

Call Mode and X.121 parameters................................................................................... 6-9

Route IP and LAN Adrs................................................................................................ 6-10

Example of an X.25 IP configuration........................................................................... 6-10

Configuring X.25 PAD connections.................................................................................... 6-11

X.25 PAD parameters................................................................................................... 6-11

X.3 Param Prof...................................................................................................... 6-12

VC Timer enable ................................................................................................... 6-12

Auto-call X.121 addr............................................................................................. 6-12

Configuring an X.25 PAD connection.......................................................................... 6-13

Example of X.25 PAD........................................................................................... 6-14

Setting up X.25 PAD sessions ............................................................................................. 6-14

X.3 parameters and profiles.......................................................................................... 6-14

X.25 PAD commands................................................................................................... 6-18

Commands for working with X.3 parameters and profiles ................................... 6-18

X.25 PAD commands for managing calls............................................................. 6-19

PAD service signals...................................................................................................... 6-21

X.25 clear cause codes.................................................................................................. 6-22

X.25 diagnostic field values.......................................................................................... 6-22

xiv MAX 6000/3000 Network Configuration Guide

Contents

Customizing script support for X.25 PAD........................................................................... 6-24

Parameters and commands............................................................................................ 6-25

X28 terminal–server command ............................................................................. 6-25

X.25 PAD commands............................................................................................ 6-25

Accessing the PAD by using the PAD script support feature....................................... 6-26

Setting up ISDN D channel X.25 support............................................................................ 6-27

Configuring ISDN D channel X.25 support ................................................................. 6-27

Customized X.25 T3POS support................................................................................. 6-27

Protocol summary.................................................................................................. 6-28

Configuring a T3POS connection.......................................................................... 6-31

Accessing the T3POS............................................................................................ 6-31

Always On/Dynamic ISDN (AO/DI)................................................................................... 6-32

Introduction................................................................................................................... 6-33

How it works................................................................................................................. 6-33

Configuring an AO/DI connection ............................................................................... 6-34

Configuring the X.25 profile................................................................................. 6-34

Configuring the Answer profile............................................................................. 6-35

Configuring a Connection profile to support AO/DI............................................. 6-35

Displaying AO/DI operation......................................................................................... 6-36

Displaying whether or not the MAX supports AO/DI .......................................... 6-36

Displaying active AO/DI calls............................................................................... 6-37

Displaying packet processing for a specific session.............................................. 6-38

RADIUS support for Always On/Dynamic ISDN (AO/DI)......................................... 6-38

Accounting records for each active AO/DI call .................................................... 6-38

RADIUS dial-in AO/DI profile for PAP/CHAP with a fixed IP address.............. 6-43

Changes to show users command.......................................................................... 6-44

Chapter 7 Configuring IP Routing................................................................... 7-1

Introduction to IP routing on the MAX ................................................................................. 7-1

IP address and subnet mask usage in MAX units........................................................... 7-1

Default subnet masks............................................................................................... 7-1

Subnet mask format................................................................................................. 7-2

Zero subnetworks .................................................................................................... 7-3

IP routing table................................................................................................................7-4

MAX IP interfaces.......................................................................................................... 7-4

Ethernet interfaces................................................................................................... 7-4

WAN IP interfaces................................................................................................... 7-5

Configuring LAN interfaces .................................................................................................. 7-7

Configuring primary and secondary IP addresses for the LAN...................................... 7-7

Configuring routing table updates .................................................................................. 7-8

Configuring Address Resolution Protocol (ARP) responses.......................................... 7-8

Example of configuration of a MAX IP interface on a subnet....................................... 7-8

Configuring system-level routing policies........................................................................... 7-10

Dynamic IP addressing for dial-in hosts....................................................................... 7-10

Enabling dynamic address assignment.................................................................. 7-10

Specifying address pools ....................................................................................... 7-10

Forcing callers configured for a pool address to accept dynamic assignment ...... 7-11

Summarizing host routes in routing table advertisements..................................... 7-11

Example of how to set up address pools with route summarization ..................... 7-11

Boot Protocol (BOOTP) requests to other networks .................................................... 7-13

Name resolution service (DNS or WINS) .................................................................... 7-14

DNS lists................................................................................................................ 7-15

Contents

MAX 6000/3000 Network Configuration Guide xv

Client DNS ............................................................................................................ 7-15

Example of address resolution configuration........................................................ 7-15

Configuring DHCP services ......................................................................................... 7-19

How the MAX assigns IP addresses when acting as a DHCP server.................... 7-19

Examples of DHCP service configuration............................................................. 7-20

Translating network addresses for a LAN.................................................................... 7-23

Single-address NAT and port routing.................................................................... 7-23

Multiple-address NAT........................................................................................... 7-24

Configuring single- or multiple-address NAT....................................................... 7-26

Configuring NAT port routing (Static Mapping subprofiles) ............................... 7-27

Setting and maintaining system time..................................................................... 7-29

Telnet password..................................................................................................... 7-30

Shared Connection profiles ................................................................................... 7-30

Dial-out routes in a redundant configuration......................................................... 7-30

UDP checksums for ensuring data integrity.......................................................... 7-30

Suppressing host route advertisements.................................................................. 7-31

Configuring WAN interfaces............................................................................................... 7-31

Enabling IP routing....................................................................................................... 7-31

Configuring routes for WAN connections.................................................................... 7-31

Specify the remote IP address ............................................................................... 7-31

Configuring numbered-interface routing............................................................... 7-32

Specifying a local IP interface address.................................................................. 7-32

Enabling dynamic IP addressing ........................................................................... 7-32

Assigning metrics and preferences........................................................................ 7-33

Configuring RIP on a WAN interface................................................................... 7-33

IP Direct configuration.......................................................................................... 7-33

Settings in RADIUS profiles ........................................................................................ 7-34

Remote host requirements for WAN connections........................................................ 7-35

UNIX software ...................................................................................................... 7-36

Windows or OS/2 software.................................................................................... 7-36

Macintosh software................................................................................................ 7-36

TCP/IP software configuration.............................................................................. 7-36

Examples of WAN interface configuration.................................................................. 7-36

Configuring dynamic address assignment to a dial-in host................................... 7-36

Configuring a host connection with a static address ............................................. 7-38

Configuring an IP Direct connection..................................................................... 7-40

Configuring a router-to-router connection ............................................................ 7-41

Configuring a router-to-router connection on a subnet ......................................... 7-42

Configuring a numbered interface......................................................................... 7-44

Type of service (TOS) support for selecting quality of service.................................... 7-46

Defining TOS policy within a profile.................................................................... 7-46

Defining TOS filters.............................................................................................. 7-49

Examples of connection-based TOS configuration............................................... 7-49

Example of defining a TOS filter.......................................................................... 7-53

Example of applying TOS filters to WAN connections........................................ 7-54

Configuring IP routes...........................................................................................................7-55

Static routes...................................................................................................................7-55

Dynamic routes............................................................................................................. 7-56

Route preferences and metrics on a MAX unit............................................................. 7-56

Static route configuration.............................................................................................. 7-56

Settings in a Static Route profile........................................................................... 7-56

Settings in a RADIUS route profiles..................................................................... 7-58

xvi MAX 6000/3000 Network Configuration Guide

Contents

Route settings in a RADIUS user profile .............................................................. 7-58

Connection-specific private static routes (RADIUS only).................................... 7-59

Configuring the default route ................................................................................ 7-59

Defining a static route to a remote subnet............................................................. 7-60

Example of route preferences configuration.......................................................... 7-60

Dynamic route configuration........................................................................................ 7-61

Example of RIP and ICMP configuration..................................................................... 7-62

Chapter 8 Configuring OSPF Routing............................................................ 8-1

OSPF overview...................................................................................................................... 8-1

TAOS implementation of OSPF..................................................................................... 8-2

OSPF features................................................................................................................. 8-2

Security.................................................................................................................... 8-2

Support for variable length subnet masks................................................................ 8-2

Exchange of routing information............................................................................. 8-3

Designated and Backup Designated Routers........................................................... 8-3

Configurable metrics ............................................................................................... 8-4

Hierarchical routing (areas)..................................................................................... 8-5

Stub areas................................................................................................................. 8-6

Not So Stubby Areas (NSSAs)................................................................................ 8-6

The link-state routing algorithm.............................................................................. 8-7

Configuring OSPF routing in the MAX................................................................................. 8-9

Configuring OSPF on the Ethernet interface.................................................................. 8-9

Make sure the MAX is configured as an IP host................................................... 8-10

Configure the MAX for OSPF............................................................................... 8-10

Configuring OSPF across the WAN............................................................................. 8-12

Configuring a WAN link that does not support OSPF ................................................. 8-13

Configuring the MAX as an NSSA internal router....................................................... 8-15

Chapter 9 Setting Up IP Multicast Forwarding .............................................. 9-1

Introduction to multicast forwarding ..................................................................................... 9-1

Configuring multicast forwarding.......................................................................................... 9-2

Enabling multicast forwarding........................................................................................ 9-2

Identifying the MBONE interface .................................................................................. 9-2

Multicast forwarder polling activities............................................................................. 9-2

Configuring the MAX to support multicast clients ........................................................ 9-2

Specifying the interfaces that support multicast clients .......................................... 9-2

Specifying the rate which multicast clients accept packets..................................... 9-3

Querying for active group members........................................................................ 9-3

Multicast interfaces......................................................................................................... 9-3

Implicit priority setting for dropping multicast packets ................................................. 9-4

Monitoring connectivity problems through heartbeat monitoring.................................. 9-4

Examples of multicast forwarding configuration................................................................... 9-5

Forwarding from an MBONE router on Ethernet........................................................... 9-5

Forwarding from an MBONE router on a WAN link..................................................... 9-6

Configuring the MAX to respond to multicast clients ............................................ 9-7

Configuring the MBONE interface ......................................................................... 9-7

Configuring multicasting on WAN interfaces......................................................... 9-7

Contents

MAX 6000/3000 Network Configuration Guide xvii

Chapter 10 Setting Up Virtual Private Networks............................................ 10-1

Introduction to Virtual Private Networks............................................................................. 10-1

Configuring ATMP tunnels ................................................................................................. 10-2

How the MAX creates ATMP tunnels.......................................................................... 10-2

Setting the UDP port..................................................................................................... 10-3

Setting an MTU limit.................................................................................................... 10-3

How link compression affects the MTU................................................................ 10-4

How ATMP tunneling causes fragmentation ........................................................ 10-4

Pushing the fragmentation task to connection end-points..................................... 10-4

Forcing fragmentation for interoperation with outdated clients................................... 10-4

Router and gateway mode............................................................................................. 10-5

Configuring the Foreign Agent..................................................................................... 10-5

Understanding the Foreign Agent parameters and attributes ................................ 10-7

Example of configuring a Foreign Agent (IP)....................................................... 10-9

Example of configuring a Foreign Agent (IPX).................................................. 10-10

Configuring a Home Agent......................................................................................... 10-11

Configuring a Home Agent in router mode......................................................... 10-11

Configuring a Home Agent in gateway mode..................................................... 10-15

Specifying the tunnel password........................................................................... 10-22

Setting an idle timer for unused tunnels.............................................................. 10-22

Configuring the MAX as an ATMP multimode agent ............................................... 10-22

Supporting mobile client routers (IP only)................................................................. 10-25

Home Agent in router mode................................................................................ 10-26

Home Agent in gateway mode ............................................................................ 10-26

ATMP connections that bypass a Foreign Agent ....................................................... 10-26

Configuring PPTP tunnels for dial-in clients..................................................................... 10-27

How the MAX works as a PAC.................................................................................. 10-27

Understanding the PPTP PAC parameters.................................................................. 10-28

Enabling PPTP..................................................................................................... 10-28

Specifying a PRI line for PPTP calls and the PNS IP address............................ 10-28

Example of a PAC configuration................................................................................ 10-28

Example of a PPTP tunnel across multiple POPs....................................................... 10-29

Routing a terminal-server session to a PPTP server................................................... 10-30

Configuring L2TP tunnels for dial-in clients..................................................................... 10-31

Elements of L2TP tunneling....................................................................................... 10-31

How the MAX creates L2TP tunnels .................................................................. 10-32

LAC and LNS mode............................................................................................ 10-32

Tunnel authentication.......................................................................................... 10-32

Client authentication............................................................................................ 10-33

Flow control......................................................................................................... 10-33

Configuration of the MAX as an LAC ....................................................................... 10-33

Understanding the L2TP LAC parameters.......................................................... 10-34

Configuring the MAX ......................................................................................... 10-34

Configuration of the MAX as an LNS........................................................................ 10-36

Support for DNS list attempts introduced for L2F and L2TP .................................... 10-36

Specifying a tunnel server ................................................................................... 10-36

Configuring Virtual Routers .............................................................................................. 10-37

Background................................................................................................................. 10-37

Current limitations...................................................................................................... 10-37

Creating a Virtual Router profile......................................................................... 10-38

Required Virtual Routers profile settings............................................................ 10-38

Required Connection profile settings.................................................................. 10-39

xviii MAX 6000/3000 Network Configuration Guide

Contents

Required Static Rtes profile settings ................................................................... 10-39

Disabling a Virtual Router profile.............................................................................. 10-39

VRouter support added for L2TP tunneling ............................................................... 10-39

Chapter 11 Configuring IPX Routing.............................................................. 11-1

Introduction to IPX routing.................................................................................................. 11-1

IPX Service Advertising Protocol (SAP) tables ........................................................... 11-2

IPX Routing Information Protocol (RIP) tables........................................................... 11-2

IPX and PPP link compression..................................................................................... 11-3

Lucent extensions to standard IPX ............................................................................... 11-3

IPX Route profiles................................................................................................. 11-3

IPX SAP filters...................................................................................................... 11-4

WAN considerations for NetWare client software....................................................... 11-4

Enabling IPX routing in the MAX....................................................................................... 11-5

Examples of IPX routing configuration........................................................................ 11-6

A basic configuration using default values............................................................ 11-6

A more complex example...................................................................................... 11-6

Verifying the router configuration......................................................................... 11-7

Configuring IPX routing connections.................................................................................. 11-7

Answer profile and Connection profile parameters...................................................... 11-7

Settings in RADIUS profiles ........................................................................................ 11-9

Peer dial-in for routing to NetWare clients ......................................................... 11-10

Controlling RIP and SAP transmissions across the WAN connection................ 11-10

Dial Query for bringing up a connection on the basis of service queries............ 11-10

Netware t/o watchdog spoofing........................................................................... 11-10

SAP HS Proxy (NetWare SAP Home Server Proxy).......................................... 11-11

Examples of IPX routing connections........................................................................ 11-11

Configuring a dial-in client connection............................................................... 11-11

Configuring a connection between two LANs .................................................... 11-13

Configuring a connection with local servers only............................................... 11-16

Configuring static IPX routes ............................................................................................ 11-19

Settings in local Static route profiles.......................................................................... 11-19

Settings in RADIUS profiles ...................................................................................... 11-20

Example of static-route configuration ........................................................................ 11-21

Creating and applying IPX SAP filters.............................................................................. 11-22

Input SAP filters and output SAP filters..................................................................... 11-23

Applying IPX SAP filters........................................................................................... 11-23

Example of IPX SAP filter configuration................................................................... 11-24

Chapter 12 AppleTalk Routing ........................................................................ 12-1

Introduction to AppleTalk routing....................................................................................... 12-1

When to use AppleTalk routing.................................................................................... 12-1

Reducing broadcast and multicast traffic .............................................................. 12-1

Providing dynamic startup information to local devices....................................... 12-2

AppleTalk zones and network ranges........................................................................... 12-2

AppleTalk zones.................................................................................................... 12-2

Extended and nonextended AppleTalk networks.................................................. 12-2

MAX units and AppleTalk nodes................................................................................. 12-4

Configuring AppleTalk routing ........................................................................................... 12-5

System-level AppleTalk routing parameters ................................................................ 12-5

Answer profile parameters............................................................................................ 12-6

Contents

MAX 6000/3000 Network Configuration Guide xix

Per-connection AppleTalk routing parameters............................................................. 12-7

Configuring an AppleTalk connection with RADIUS ................................................. 12-7

Chapter 13 Configuring Packet Bridging....................................................... 13-1

Introduction to Lucent bridging........................................................................................... 13-1

Disadvantages of bridging............................................................................................ 13-1

How the MAX initiates a bridged WAN connection.................................................... 13-2

Physical addresses and the bridge table................................................................. 13-2

Broadcast addresses............................................................................................... 13-2

Establishing a bridged connection ....................................................................................... 13-3

Enabling bridging................................................................................................................. 13-3

Managing the bridge table.................................................................................................... 13-4

Transparent bridging............................................................................................................13-4

Configuring bridged connections......................................................................................... 13-5

Bridge and Recv Auth................................................................................................... 13-5

Station........................................................................................................................... 13-6

Bridge and Dial Brdcast................................................................................................ 13-6

Netware t/o and Handle IPX......................................................................................... 13-6

Name, Active, and Recv PW ........................................................................................ 13-6

Bridge Adrs parameters................................................................................................ 13-7

RADIUS bridging attributes......................................................................................... 13-7

Using RADIUS to configure bridge table entries......................................................... 13-8

Bridge profile configuration examples.................................................................. 13-9

Example of a bridged connection ................................................................................. 13-9

IPX bridged configurations......................................................................................... 13-12

The IPX bridging parameters .............................................................................. 13-12

Example of an IPX client bridge (local clients) .................................................. 13-14

Example of an IPX server bridge (local servers)................................................. 13-15

Configuring proxy mode on the MAX ....................................................................... 13-16

Chapter 14 Defining Static Filters................................................................... 14-1

Filter overview..................................................................................................................... 14-1

Basic types of filters ..................................................................................................... 14-1

Data and call filters....................................................................................................... 14-2

How filters work........................................................................................................... 14-3

Generic filters ........................................................................................................ 14-3

IP filters ................................................................................................................. 14-3

Type of Service filters ........................................................................................... 14-4

IPX filters .............................................................................................................. 14-4

Specifying a filter’s direction ....................................................................................... 14-5

Specifying a filter’s forwarding action......................................................................... 14-6

Defining generic filters ........................................................................................................14-7

Settings in a local Filter profile..................................................................................... 14-7

Settings in a RADIUS profile....................................................................................... 14-8

Specifying the offset to the bytes to be examined........................................................ 14-9

Specifying the number of bytes to test.......................................................................... 14-9

Masking the value before comparison........................................................................ 14-10

Examples of a generic call filter ................................................................................. 14-11

Defining IP filters............................................................................................................... 14-11

Settings in a local Filter profile................................................................................... 14-11

Settings in a RADIUS profile..................................................................................... 14-13

xx MAX 6000/3000 Network Configuration Guide

Contents

Filtering by source or destination address .................................................................. 14-14

Filtering by port numbers ........................................................................................... 14-14

Examples of an IP filter to prevent local address spoofing ........................................ 14-15

Examples of an IP filter for more complex security issues ........................................ 14-16

Defining Type of Service filters......................................................................................... 14-18

Settings in a local Filter profile................................................................................... 14-18

Settings in a RADIUS profile..................................................................................... 14-19

Examples of defining a TOS filter.............................................................................. 14-21

Defining IPX filters............................................................................................................14-22

Filtering by source or destination address .................................................................. 14-23

Filtering by socket number ......................................................................................... 14-23

Example of an outbound IPX filter............................................................................. 14-24

Example of an inbound IPX filter............................................................................... 14-24

Applying a filter to an interface......................................................................................... 14-24

Settings in local profiles ............................................................................................. 14-25

Settings in RADIUS profiles ...................................................................................... 14-26

How the system uses the Answer Default parameter ................................................. 14-26

Examples of applying a data filter to a WAN interface.............................................. 14-27

Examples of applying a call filter to a WAN interface............................................... 14-28

Examples of applying a TOS filter to a WAN interface............................................. 14-28

Example of applying a filter to a LAN interface........................................................ 14-29

Index.......................................................................................... Index-1

Page is loading ...

Lucent Technologies MAX 3000 Configuration manual

This manual is also suitable for

Lucent Technologies MAX 3000 Configuration manual

Related papers

Other documents