LG 55LA965Y Owner's manual

OWNER’S MANUAL

LED TV

*

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

LA79**

LA86**

LA96**

LA97**

LA98**

* LG LED TV applies LCD screen with LED backlights.

P/NO : MFL67706415 (1310-REV05)

Printed in Korea

2

ENG

ENGLISH

TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

8 Viewing 3D Imaging (Only 3D models)

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking

13 Separate purchase

14 Parts and buttons

16 Lifting and moving the TV

17 Setting up the TV

17 - Attaching the stand

20 Mounting on a table

21 Mounting on a wall

23 Tidying cables

24 Using Sliding Speaker

24 Using Built-in Camera

25 - Preparing Built-in Camera

25 - Name of Parts of Built-in Camera

25 - Checking the Camera’s Shooting

Range

26 MAKING CONNECTIONS

26 Antenna connection

27 HDMI connection

27 Headphone connection

28 DVI to HDMI connection

28 Component connection

29 Composite connection

29 Audio connection

29 - Digital optical audio connection

30 USB connection

30 MHL connection

31 REMOTE CONTROL

33 MAGIC REMOTE CONTROL

FUNCTIONS

35 Registering Magic Remote Control

35 How to use Magic Remote Control

35 Precautions to Take when Using the

Magic Remote Control

36 USING THE USER GUIDE

WARNING

y

If you ignore the warning message, you

may be seriously injured or there is a

possibility of accident or death.

CAUTION

y

If you ignore the caution message, you

may be slightly injured or the product may

be damaged.

NOTE

y

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

37 MAINTENANCE

37 Cleaning your TV

37 - Screen, frame, cabinet and stand

37 - Power cord

37 TROUBLESHOOTING

38 SPECIFICATIONS

45 LICENSES

45 OPEN SOURCE SOFTWARE

NOTICE

45 EXTERNAL CONTROL DEVICE

SETUP

3

ENGENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a

bathroom

- Near any heat source such as stoves

and other devices that produce heat

- Near kitchen counters or humidifiers

where they can easily be exposed to

steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric

shock, malfunction or product deformation.

y

Do not place the product where it might be

exposed to dust.

This may cause a fire hazard.

y

Mains Plug is the TV connecting/

disconnecting device to AC mains electric

supply. This plug must remain readily

attached and operable when TV is in use.

y

Do not touch the power plug with wet

hands. Additionally, if the cord pin is wet

or covered with dust, dry the power plug

completely or wipe dust off.

You may be electrocuted due to excess

moisture.

y

Make sure to connect Mains cable to

compliant AC mains socket with Grounded

earth pin. (Except for devices which

are not grounded on earth.) Otherwise

possibility you may be electrocuted or

injured.

y

Insert power cable plug completely into

wall socket otherwise if not secured

completely into socket, fire ignition may

break out.

y

Ensure the power cord does not come into

contact with hot objects such as a heater.

This may cause a fire or an electric shock

hazard.

y

Do not place a heavy object, or the

product itself, on power cables.

Otherwise, this may result in fire or electric

shock.

y

Bend antenna cable between inside and

outside building to prevent rain from

flowing in.

This may cause water damaged inside the

Product and could give an electric shock.

y

When mounting TV onto wall make sure to

neatly install and isolate cabling from rear

of TV as to not create possibility of electric

shock /fire hazard.

y

Do not plug too many electrical devices

into a single multiple electrical outlet.

Otherwise, this may result in fire due to

over-heating.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not drop the product or let it fall over

when connecting external devices.

Otherwise, this may result in injury or

damage to the product.

y

Keep the anti-moisture packing material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach

of children.

Desiccant

y

Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over,

which may cause serious injury.

y

Dispose of used batteries carefully

to ensure that a small child does not

consume them. Please seek Doctor-

Medical Attention immediately if child

consumes batteries.

y

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall

Socket while it is connected to the input

terminal on the wall. Additionally, do not

touch the power cable right after plugging

into the wall input terminal. You may be

electrocuted. (Depending on model)

y

Do not put or store inflammable

substances near the product. There is a

danger of combustion/explosion or fire due

to careless handling of the inflammable

substances.

y

Do not drop metallic objects such as

coins, hair pins, chopsticks or wire into

the product, or inflammable objects such

as paper and matches. Children must

pay particular attention. Electrical shock,

fire or injury can occur. If a foreign object

is dropped into the product, unplug the

power cord and contact the service centre.

y

Do not spray water on the product or

scrub with an inflammable substance

(thinner or benzene). Fire or electric shock

accident can occur.

y

Do not allow any impact, shock or any

objects to fall into the unit, and do not

drop anything onto the screen.

You may be injured or the product can be

damaged.

y

Never touch this product or antenna

during a thunder or lighting storm.

You may be electrocuted.

y

Never touch the wall outlet when there is

leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

y

Do not disassemble, repair or modify the

product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check,

calibration or repair.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

If any of the following occur, unplug the

product immediately and contact your

local service centre.

- The product has been impacted by

shock

- The product has been damaged

- Foreign objects have entered the

product

- The product produced smoke or a

strange smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket

if you do not intend to use the TV for a

long period of time. Accumulated dust

can cause fire hazard and insulation

deterioration can cause electric leakage/

shock/fire.

y

Apparatus shall not be exposed to dripping

or splashing and no objects filled with

liquids, such as vases, shall be placed on

the apparatus.

CAUTION

y

Install the product where no radio wave

occurs.

y

There should be enough distance between

an outside antenna and power lines to

keep the former from touching the latter

even when the antenna falls.

This may cause an electric shock.

y

Do not install the product on places such

as unstable shelves or inclined surfaces.

Also avoid places where there is vibration

or where the product cannot be fully

supported. Otherwise, the product may

fall or flip over, which may cause injury or

damage to the product.

y

If you install the TV on a stand, you need

to take actions to prevent the product from

overturning. Otherwise, the product may

fall over, which may cause injury.

y

If you intend to mount the product to a

wall, attach VESA standard mounting

interface (optional parts) to the back of the

product. When you install the set to use

the wall mounting bracket (optional parts),

fix it carefully so as not to drop.

y

Only use the attachments / accessories

specified by the manufacturer.

y

When installing the antenna, consult with a

qualified service technician. If not installed

by a qualified technician, this may create

a fire hazard or an electric shock hazard.

y

We recommend that you maintain a

distance of at least 2 to 7 times the

diagonal screen size when watching TV.

If you watch TV for a long period of time,

this may cause blurred vision.

y

Only use the specified type of battery.

This could cause damage to the remote

control.

y

Do not mix new batteries with old

batteries. This may cause the batteries to

overheat and leak.

y

Batteries should not be exposed to

excessive heat. For example, keep away

from direct Sunlight, open fireplace and

electric heaters.

y

Do not place non-rechargeable batteries

in charging device.

y

Make sure there are no objects between

the remote control and its sensor.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Signal from Remote Control can be

interrupted due to external/internal lighting

eg Sunlight, fluorescent lighting.If this

occurs turn off lighting or darken viewing

area.

y

When connecting external devices such

as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over,

which may cause injury or damage the

product.

y

Do not turn the product On/Off by

plugging-in or unplugging the power plug

to the wall outlet. (Do not use the power

plug for switch.)

It may cause mechanical failure or could

give an electric shock.

y

Please follow the installation instructions

below to prevent the product from

overheating.

- The distance between the product and

the wall should be more than 10 cm.

- Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in

a cupboard).

- Do not install the product on a carpet or

cushion.

- Make sure the air vent is not blocked by

a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation

openings when watching the TV for long

periods as the ventilation openings may

become hot. This does not affect the

operation or performance of the product.

y

Periodically examine the cord of your

appliance, and if its appearance indicates

damage or deterioration, unplug it,

discontinue use of the appliance, and

have the cord replaced with an exact

replacement part by an authorized

servicer.

y

Prevent dust collecting on the power plug

pins or outlet.

This may cause a fire hazard.

y

Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or

walked upon. Pay particular attention to

plugs, wall outlets, and the point where

the cord exits the appliance.

y

Do not press strongly upon the panel with

a hand or sharp object such as nail, pencil

or pen, or make a scratch on it, as it may

cause damage to screen.

y

Avoid touching the screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary or

permanent distortion/damage to screen.

y

When cleaning the product and its

components, unplug the power first

and wipe it with a soft cloth. Applying

excessive force may cause scratches or

discolouration. Do not spray with water

or wipe with a wet cloth. Never use glass

cleaner, car or industrial shiner, abrasives

or wax, benzene, alcohol etc., which can

damage the product and its panel.

Otherwise, this may result in fire, electric

shock or product damage (deformation,

corrosion or breakage).

y

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if you turn off this

unit by SWITCH.

7

ENGENGLISH

SAFETY INSTRUCTIONS

y

When unplugging the cable, grab the plug

and unplug it, by pulling at the plug. Don’t

pull at the cord to unplug the power cord

from the power board, as this could be

hazardous.

y

When moving the product, make sure

you turn the power off first. Then, unplug

the power cables, antenna cables and all

connecting cables.

The TV set or power cord may be

damaged, which may create a fire hazard

or cause electric shock.

y

When moving or unpacking the product,

work in pairs because the product is

heavy.

Otherwise, this may result in injury.

y

Contact the service centre once a year to

clean the internal parts of the product.

Accumulated dust can cause mechanical

failure.

y

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

y

If the product feels cold to the touch, there

may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong

with product.

y

The panel is a high technology display

product with resolution of two million to six

million pixels. You may see tiny black dots

and/or brightly coloured dots (red, blue or

green) at a size of 1 ppm on the panel.

This does not indicate a malfunction and

does not affect the performance and

reliability of the product.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

y

You may find different brightness and

colour of the panel depending on your

viewing position(left/right/top/down).

This phenomenon occurs due to the

characteristic of the panel. It is not related

with the product performance, and it is not

malfunction.

y

Displaying a still image (e.g., broadcasting

channel logo, on-screen menu, scene from

a video game) for a prolonged time may

cause damage to the screen, resulting

in retention of the image, which is known

as image sticking. The warranty does not

cover the product for image sticking.

Avoid displaying a fixed image on your

television’s screen for a prolonged period

(2 or more hours for LCD, 1 or more hours

for Plasma).

Also, if you watch the TV at a ratio of 4:3

for a long time, image sticking may occur

on the borders of the panel.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to tempera-ture and humidity. This

noise is common for products where

thermal deformation is required. Electrical

circuit humming/panel buzzing: A low level

noise is generated from a high-speed

switching circuit, which supplies a large

amount of current to operate a product. It

varies depend-ing on the product.

This generated sound does not affect the

performance and reliability of the product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging (Only 3D

models)

WARNING

Viewing Environment

y

Viewing Time

- When watching 3D contents, take 5 -

15 minute breaks every hour. Viewing

3D contents for a long period of time

may cause headache, dizziness,

fatigue or eye strain.

Those that have a photosensitive

seizure or chronic illness

y

Some users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

y

Do not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness

such as epilepsy, cardiac disorder, or

blood pressure disease, etc.

y

3D Contents are not recommended to

those who suffer from stereo blindness

or stereo anomaly. Double images or

discomfort in viewing may be experienced.

y

If you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism,

you may have trouble sensing depth and

easily feel fatigue due to double images. It

is advised to take frequent breaks than the

average adult.

y

If your eyesight varies between your right

and left eye, revise your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation

or refraining from watching 3D contents

y

Do not watch 3D contents when you feel

fatigue from lack of sleep, overwork or

drinking.

y

When these symptoms are experienced,

stop using/watching 3D contents and get

enough rest until the symptom subsides.

- Consult your doctor when the

symptoms persist. Symptoms may

include headache, eyeball pain,

dizziness, nausea, palpitation,

blurriness, discomfort, double image,

visual inconvenience or fatigue.

CAUTION

Viewing Environment

y

Viewing Distance

- Maintain a distance of at least twice the

screen diagonal length when watching

3D contents. If you feel discomfort in

viewing 3D contents, move further away

from the TV.

Viewing Age

y

Infants/Children

- Usage/ Viewing 3D contents for children

under the age of 5 are prohibited.

- Children under the age of 10 may

overreact and become overly excited

because their vision is in development

(for example: trying to touch the

screen or trying to jump into it. Special

monitoring and extra attention is

required for children watching 3D

contents.

- Children have greater binocular

disparity of 3D presentations than adults

because the distance between the eyes

is shorter than one of adults. Therefore

they will perceive more stereoscopic

depth compared to adults for the same

3D image.

y

Teenagers

- Teenagers under the age of 19 may

react with sensitivity due to stimulation

from light in 3D contents. Advise them

to refrain from watching 3D contens for

a long time when they are tired.

y

Elderly

- The elderly may perceive less 3D

effect compared to the youth. Do not sit

closer to the TV than the recommended

distance.

Cautions when using the 3D glasses

y

Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos

properly.

y

Do not use 3D glasses instead of your

normal glasses, sunglasses or protective

goggles.

y

Using modied 3D glasses may cause eye

strain or image distortion.

y

Do not keep your 3D glasses in extremely

high or low temperatures. It will cause

deformation.

y

The 3D glasses are fragile and are easy

to be scratched. Always use a soft, clean

piece of cloth when wiping the lenses. Do

not scratch the lenses of the 3D glasses

with sharp objects or clean/wipe them with

chemicals.

9

ENGENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you

are using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

WARNING

y

You need to enable easy access for connecting and disconnecting electric cables fed from the

mains.

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

P

or

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

Remote control,

batteries (AAA)

The remote control

will not be included

for all sales market.

(Depending on model)

(See p. 31, 32)

Magic remote

control, batteries

(AA)

(Depending on model)

(See p. 33, 34)

Owner’s manual Power Cord

(Depending on model)

Dual play glasses

(Depending on model)

Cinema 3D Glasses

The number of 3D

glasses may differ

depending on the

model or country.

Component video

cable

(See p. 28)

Composite video

cable

(See p. 28, 29)

Tag On

or

Tag on

(Depending on model)

Isolator

(Depending on model)

(See p. 12)

Cable holder

(Depending on

model)

(See p. 23)

Cable Management

2EA

(Only LA79**)

(See p. 23)

11

ENGENGLISH

ASSEMBLING AND PREPARING

Stand Screws

8EA, M4 x L14

(Only LA79**)

4EA, M4 x L14

(Only LA965*,

55LA97**)

(See p. 17, 18)

Stand Screws

4EA, M4 x L16

(Only LA86**)

(See p. 17)

Stand Screws

4EA, M4 x L20

(Only LA960*,

LA98**)

(See p. 17, 19)

Stand Screws

6EA, M5 x L16

(Only LA98**)

(See p. 19)

Stand Base/ Stand

Body

(Only LA79**)

(See p. 17)

Stand Base

(Only LA86**,

LA960*)

(See p. 17)

Stand Base

(Only LA97**)

(See p. 18)

Stand Base/ Stand

Body

(Only LA98**)

(See p. 19)

Stand Base

(Only LA965*)

(See p. 18)

Wall mount inner

spacers

4EA

(Only LA97**)

(See p. 22)

Wall mount screws

4EA, M6 x L54

(Only 55LA97**)

(See p. 22)

Wall mount screws

4EA, M8 x L44

(Only 65LA97**)

(See p. 22)

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

y

Antenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND

of antenna signal.

»

If there is a voltage difference between TV Set and GND of antenna signal, the antenna

contact might be heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV

antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the

wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

or

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains

connection or through other equipment with a connection to protective earthing - and to a

cable distribution system using coaxial cable, may in some circumstances create a re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing

electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

Video call camera

(Only 70LA86**)

13

ENGENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer to buy these items.

These devices only work with certain models.

P

AG-F***DP

Dual play glasses

AG-F***

Cinema 3D glasses

AN-MR400

Magic remote

Tag On

AN-VC5**

Video call camera

LG Audio device Tag on

Compatibility

LA79**, LA965*, LA98** LA86** LA960*, LA97**

AG-F***DP

Dual play glasses

• • •

AG-F***

Cinema 3D glasses

• • •

AN-MR400

Magic remote

• • •

AN-VC5**

Video call camera

•

(Depending on

model)

LG Audio device

• • •

Tag on

• • •

The model name or design may be changed depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

A type : LA79**

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor

LG Logo light

B type : LA86**, LA960*

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor

LG Logo light

Built-in Camera

(Only 42/47/55/60LA86**,

LA960*)

C type : LA965*

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor

Power Indicator

15

ENGENGLISH

ASSEMBLING AND PREPARING

Button Description

H

Scrolls through the saved programmes.

H

Adjusts the volume level.

H

Selects the highlighted menu option or confirms an input.

S Accesses the main menu, or saves your input and exits the menus.

H

Changes the input source.

Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor

Power Indicator

Built-in Camera

D type : LA97**

E type : LA98**

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control and Intelligent

1

sensors

LG Logo light

CAUTION

y

To avoid possible SPEAKER damage or

degradation in performance please keep

contact of TV/Speaker out of reach of

Children. (Only LA965*)

NOTE

y

You can set the LG Logo light to on or off

by selecting OPTION in the main menus.

(Depending on model)

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for

safe transportation regardless of its type and

size.

CAUTION

y

Avoid touching the screen at all times, as

this may result in damage to the screen.

y

It is recommended to move the TV in the

box or packing material that the TV originally

came in.

y

Before moving or lifting the TV, disconnect

the power cord and all cables.

y

When holding the TV, the screen should face

away from you to avoid damage.

y

Hold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

y

When transporting a large TV, there should

be at least 2 people.

y

When transporting the TV by hand, hold the

TV as shown in the following illustration.

y

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

y

Do not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

17

ENGENGLISH

ASSEMBLING AND PREPARING

LA86**, LA960*

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

1

2

3

1

2

Stand Base

M4 x L16, 4EA

(Only LA86**)

3

M4 x L14

4EA

LA79**

Stand Base

Stand Body

Front

M4 x L14

4EA

M4 x L20, 4EA

(Only LA960*)

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

LA97**

3

1

Stand Base

M4 x L14

4EA

2

NOTE

y

The stand screws are already attached

at the back of the TV. Please use these

attached screws to assemble the TV and

stand. (Only 65LA97**)

2

1

Stand Base

3

M4 x L14

4EA

LA965*

NOTE

y

Be sure to attach the upper mounting

hole first, and then attach the lower

connection second.

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

1 2

19

ENGENGLISH

ASSEMBLING AND PREPARING

LA98**

2

3

Front

M5 x L16

6EA

Stand Body

Front

Stand Base

1

4

CAUTION

y

When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

y

Make sure that the screws are fastened

completely. (If they are not fastened

securely enough, the TV may tilt forward

after being installed.)

Do not fasten the screws with excessive

force otherwise they may be worn out

and become loose.

NOTE

y

Remove the stand before installing the

TV on a wall mount by performing the

stand attachment in reverse.

M4 x L20

4EA

20

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from

the wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

y

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

Adjusting the angle of the TV to suit view

(This feature is not available for all models.)

Swivel 15 degrees to the left or right and adjust

the angle of the TV to suit your view.

(Only LA79**)

1515

Swivel 10 degrees to the left or right and adjust

the angle of the TV to suit your view.

(Only 42/47LA86**)

1010

Swivel 8 degrees to the left or right and adjust

the angle of the TV to suit your view.

(Only 55/60LA86**)

88

Swivel 7 degrees to the left or right and adjust

the angle of the TV to suit your view.

(Only LA98**)

77

CAUTION

y

When adjusting the angle of the product,

watch out for your fingers.

»

Personal injury may occur if hands or

fingers are pinched. If the product is tilted

too much, it may fall, causing damage or

injury.

Page is loading ...

LG 55LA965Y Owner's manual

This manual is also suitable for

LG 55LA965Y Owner's manual

Related papers

Other documents