Page is loading ...
MODEL: 2WDP001
2.4GHz WIRELESS DUAL-WAY
DIGITAL DOORPHONE
FEATURES.................................. .1.........
OUTDOOR UNIT.......................... 1...........
INDOOR UNIT........... . 1............. ................
INSTALLATION......................................2
OPERATING INSTRUCTIONS.................4
ACCESSORIES................................ .4....
WARNING.................................. .4..........
Version 1.1
350.001UK
* Works within 150m range
* Adjustable ringer volume
* Weatherproof outdoor unit (IP44 rated)
* Supplied complete with adaptor, fixing screws, wall plugs and
mounting brackets
Features
Outdoor unit
Working temperature:
oo
-10 C 50 C
Dimension:
112 W X162(H)X68(D)mm
SPEAKER
NAME PLATE
CALL BUTTON
MICROPHONE
RAIN SHADE
1
Installation
A.Outdoor unit
Fasten the rain shade on the wall 1.4~1.7m above the ground.
Remove the screws on the bottom of outdoor unit. Take down
the decorating bar and open the panel.
Room number
Insert 4x AA batteries.
Take down the name plate and then write down family name
or room number .
2
This wireless door phone system allows you to talk to your visitors
before opening the door. No wires required between the door bell
and the phone, making this system very easy to install. Good for
security and helpful for the elderly or less mobile.
VOLUME
SWITCH
Indoor unit
HANDSET
POWER JACK /
OUTLET
INDICATOR
LIGHT
-10 ~50
Input:
AC100-240V~50/60Hz
output:
DC12V/0.5A or DC12V/1.1A
Working temperature:
Data of switch power:
Fasten the outdoor unit on the rain shade with screws.
Cover the panel.
B.Indoor unit
Operating instructions
Accessories
Warning
Do not fix the indoor unit near the wireless telephone.
Do not fix the indoor unit in a place with high temperature
or high humidity.
Use a soft cloth to clean the units, corrosive and volatile
liquids must not be used
Keep the units away from direct sunlight and damp
environments where possible
Do not drop the units or subject them to any forceful
blows.
Do not take the units apart without professional advice.
When the power indicator flickers on the units please
replace the batteries immediately
3
4
Fasten the bracket of indoor unit on the wall.
Open the battery cover.
Hang the indoor unit on the bracket.
Insert 4x AA batteries and then replace the cover.
Plug the power supply into a mains socket.
Insert the power jack into the socket on the indoor unit.
When the CALL button is pressed on the outdoor unit the chime
will sound on the indoor unit and the indicator light will come on.
You are then able to speak with your visitor for a maximum of
one minute.
After hanging up on your visitor another chime will be heard and
the indicator light will blink every 3 seconds.
Install the decorating bar and then fasten the screws on the
bottom of the unit.
One rain shade
One power supply
One fixing bracket Fixing screws
Errors and omissions excepted.
Copyright? 2017. AVSL Group Ltd
350.001UK User Manual
/
