Pioneer NC-50DAB User manual

Page is loading ...

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 5

Display .................................................................................... 6

Install

Connect the Speakers ............................................................ 7

Connecting the antennas and power cord, etc. ...................... 8

Initial Setup

Power On & Initial Setup ........................................................ 9

Playback

Playing CDs .......................................................................... 12

USB Storage Device/HDD .................................................... 14

Internet Radio ....................................................................... 16

Spotify ................................................................................... 17

Listening to the FM Radio ..................................................... 18

Listening to DAB Digital Radio ........................................................ 20

BLUETOOTH

®

..................................................................... 21

AirPlay

®

................................................................................ 23

Playing audio from a turntable .............................................. 24

Playing audio from other external device ............................. 25

Music Server ......................................................................... 27

Entering text, adjusting sound quality, etc. ........................... 29

Supplementary information

Supplementary information for player functions .................... 30

Advanced Setup

Advanced Settings................................................................. 31

Firmware Update .................................................................. 35

Others

Troubleshooting .................................................................... 37

General Specifications .......................................................... 40

License and Trademark Information ..................................... 42

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

NETWORK CD RECEIVER

NC-50DAB

Instruction

Manual

2

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

What's in the box

Before Start

0 The power cord must be connected only after all other cable connections are completed.

0 Connect speakers with 4 Ω to 16 Ω impedance.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future.

0 Specifications and appearance are subject to change without prior notice.

Main unit (1)

Remote controller (RC-946S) (1), Batteries (AAA/R03) (2)

Power cord (1)

DAB/FM wire antenna (1)

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

3

E

N

Front Panel

Part Names

1. Í STANDBY/ON button: Turns the unit on or to standby mode.

2. Power indicator: This lights blue when the unit is on.

3. Disc tray: Place discs here. 8-cm discs can also be used.

4. < button: Open or close the disc tray.

5. INPUT button: Switches the input to be played.

6. Display (ÄP6)

7. VOLUME dial: Adjust the volume. Adjust between 0 and 50.

8. Remote control sensor

9. PHONES jack: Connect stereo headphones with a standard plug (ø6.3 mm).

10.

USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.

0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port

(maximum 5 V/1 A) on the rear of the unit.

11.

Play button:

∫

: This button stops playback.

1

/; : This button pauses the playback.

:6

: Return to the beginning of the track being played. Press and hold to rewind the

track quickly. (CD)

Move to the previous track. (USB, Music Server)

59

: Move to the next track. Press and hold to fast-forward through the track. (CD)

Move to the next track. (USB, Music Server)

0 Depending on the input, the operation may not start.

 



 

4

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Rear Panel

1. AC IN: Connect the supplied power cord.

2. Speaker terminals: Connect speakers with speaker cables.

3. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled

device. Adjust their angles according to the connection status.

4. DIGITAL IN OPTICAL jack: You can play the digital audio from an external device such as

a television connected with a digital optical cable.

5. DIGITAL IN COAXIAL jack: You can play the digital audio from an external device such as

a television connected with a digital coaxial cable.

6. SIGNAL GND terminal: Connect if the turntable connected to the PHONO (MM) IN jack

has a ground wire.

7. DAB/FM ANTENNA jack: Connect the supplied DAB/FM wire antenna.

8. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.

9. NETWORK jack: Connect to the network with an ethernet cable.

10.

SUBWOOFER PRE OUT jacks: Connect a subwoofer with built-in amplifier.

11.

LINE IN jack: You can play the audio from an external device such as a television

connected with an analogue audio cable.

12.

PHONO (MM) IN jacks: Connect a turntable (MM cartridge).









 



180°

90°



> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

5

E

N

Remote Controller

1. Í STANDBY/ON button: Turns the unit on or into standby mode.

2. INPUT SELECTOR buttons: Switches the input to be played.

3. Play buttons:

:: Return to the beginning of the track being played. (CD)

Move to the track before the one being played. (USB, Music Server)

X/;: Play or pause play.

9: Move to the next track.

22: Rewind the track quickly. (CD only)

∫: Stop playback.

11: Fast-forward the track. (CD only)

0 Depending on the input, the operation may not start.

PRESET i/j buttons: Used to select stations that have been registered or to give names

to stations.

TUNE i/j buttons: Used to select radio stations.

4. MEMORY button: Used to register favorite radio stations.

5. SHUFFLE/REPEAT button: Set repeat play and shuffle play.

6. MODE button: Used for program play of CDs.

7. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

8. SETUP button: Displays the Setup menu.

9. VOLUME i/j buttons: Adjust the volume. Adjust between 0 and 50.

10.

SOUND button: Adjust the sound quality.

11.

DIMMER button: Switch the display off or adjust the brightness of the display in three

steps.

12.

CLEAR button: Used when entering text, etc.

13.

(NOW PLAYING) button: Switches the information on the

display.

14.

RETURN button: Returns the display to the previous state.

15.

MUTE button: Temporarily mutes audio. Press again to

cancel muting.































30° 30°

Approx.7 m

6

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Display

1. The input mode is displayed.

(USB Front / USB Rear / CD / Bluetooth / Network / Digital In 1 / Digital In 2 / Line /

Phono / Tuner DAB / Tuner FM)

2. The name of the file, artist, album, station, etc., is displayed.

3. Displays the play status.

4. Displays file format, sampling frequency, and quantization bit information.

5. The file play status is displayed. This may not be displayed depending on the input or file.

6. This is displayed when muting is on.

7. Lights in the following conditions.

:

When the connection setting on the unit is

"

Wired

"

and the unit is connected to the network.

:

When the connection setting on the unit is

"

Wired

"

and the unit is not connected to the network.

:

When the connection setting on the unit is

"

Wi-Fi

"

and the unit is connected to the network.

:

When the connection setting on the unit is

"

Wi-Fi

"

and the unit is not connected to the network.

8. If an album jacket is recorded for the file being played, it is displayed here.

9. Lights in the following conditions.

: When all track repeat play is on

: When one track repeat play is on

: When shuffle play is on

FLAC

44.1

kHz/24bit

USB Front

Song

Artist

Album

















1

7

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connect the Speakers

Install

1

2 3

a

Use the illustration as a reference to connect your own

speakers.

After inserting the speaker cables, tighten the terminals

firmly by turning to the right. Also make sure the exposed

wires of the speakers do not stick out of the speaker

terminals when connecting. If the exposed wires of the

speakers touch the rear panel or the i and s wires touch

each other, the protection circuit may be activated and the

power may turn off.

You can also connect a subwoofer with a built-in amplifier to

boost bass playback even more. Use a subwoofer cable for

connection.

a Speaker cable

8

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connecting the antennas and power cord, etc.

a

b

1

2

Antenna Hookup

Move the antenna around while playing the radio to find the

position with the best reception.

Power Cord Hookup

This model includes a removable power cord.

The power cord must be connected only after all other

connections are completed. Make sure you first connect the

power cord to AC IN terminal of the unit and then connect to

the outlet. Always disconnect the outlet side first when

disconnecting the power cord.

To connect to the network with an ethernet cable, use the

NETWORK jack. When using Wi-Fi connection, make

settings in initial settings (ÄP9). You can enjoy features

such as internet radio and AirPlay by connecting to the

network.

a DAB/FM wire antenna, b Power cord

9

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Power On & Initial Setup

Initial Setu p

1

3

2

Starting up: When you press Í STANDBY/ON, the power

indicator on the main unit slowly blinks blue, then "Hello" is

displayed on the display about 20 seconds later. After this,

the display goes blank, then after the Pioneer logo is

displayed, you can start operating the unit.

Wi-Fi connection settings

When you first turn the power on, the initial setup screen is

displayed automatically, allowing you to easily make Wi-Fi

connection settings.

To set, select the item with the cursors on the remote

controller and press ENTER to confirm. To return to the

previous display, press RETURN.

Initial Setup

Wired (Exit)

Wi-Fi

Selects the method of network

connection

10

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

To make Wi-Fi settings, select "Wi-Fi". If you have

connected with an ethernet cable, select "Wired(Exit)" and

confirm. If you select "Wi-Fi", select the method for setting

in the next screen (for example "Scan Networks").

0 To redo the initial settings, press SETUP on the remote

controller, select "Wi-Fi" in "Network Setting" -

"Connection", then select "Wi-Fi Setup".

Scan Networks

From the list of SSID for access points such as wireless

LAN routers, select the required SSID and make the

settings.

1. Select the SSID of the access point you want to connect

and then confirm.

2. Select either "Enter Password" or "Push Button" and

confirm. If the access point has an automatic setting

button, by selecting "Push Button" you can connect

without entering a password.

3. If you select "Enter Password", enter the password of the

access point and press ENTER. For details on how to

enter text, refer to "Entering text" (ÄP29).

If you select "Push Button", then after pressing and

holding the automatic setting button on the access point

for the required amount of time, press ENTER on the

remote controller.

4. is displayed when the settings are complete.

Use iOS Device

Set by sharing the iOS device's Wi-Fi settings with this unit.

1. Connect the iOS device by Wi-Fi.

2. Select this device in the "SET UP NEW AIRPLAY

SPEAKER..." item on the screen of the iOS device and

select "Next".

0 This unit is displayed as "Pioneer NC-50DAB

XXXXXX".

3. After establishing the connection, select "Done" on the

screen of the iOS device.

4. is displayed on the display of the unit when the

settings are complete.

Enter SSID of the access point

Set by entering the SSID of the access point you want to

connect.

1. Enter the SSID. For details on how to enter text, refer to

"Entering text" (ÄP29).

2. Select and confirm the authentication method.

0 If you select "None", proceed to step 3. If you select

"WEP", "WPA", or "WPA2", enter the password and

confirm.

3. is displayed when the settings are complete.

Wireless

Input SSID

Use iOS Device

Scan Networks

Wireless

ddddddddddddddddd

ccccccccccccccccccc

bbbbbbbbbbbbbbbbb

aaaaaaaaaaaaaaaa

Wireless

Push Button

Enter Password

Password

A

Delete One Character[CLEAR]

Change Text[REPEAT]

SSID

A

Delete One Character[CLEAR]

Change Text[REPEAT]

Security Method

WPA2

WPA

WEP

None

11

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

12

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Playing CDs

Playback

a

1

2 b

c

This unit can also play CD-R recorded with MP3 or WMA

format files, along with commercially available music CDs.

0 The supported sampling rates for MP3 files are 8 kHz to

48 kHz, and supported bitrates are between 64 kbps and

384 kbps.

0 The supported sampling rates for WMA files are 32 kHz,

44.1 kHz, and 48 kHz, and supported bitrates are

between 64 kbps and 320 kbps.

0 Play of CDs not conforming to the CD standards, such as

copy control CDs, is not guaranteed.

Playing music CDs

1. Turn the unit on.

2. Press CD to change input to CD.

3. Press < on the main unit to open the disc tray.

4. Put the disc on the tray, then press < to close the tray.

5. Press

X/; (a) on the remote controller to start play. Use

other play buttons (b) to stop play or choose tracks to

play. If you press (NOW PLAYING) (c), you can

switch the display to show the elapsed time or remaining

time of the track.

13

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Playing MP3/WMA discs

1. Turn the unit on.

2. Press CD to change input to CD.

3. Press < on the main unit to open the disc tray.

4. Put the disc on the tray, then press < to close the tray.

5. When reading of the disc is complete, the numbers of

folders containing MP3/WMA files and track numbers are

displayed.

0 If MP3/WMA files are stored in two or more folders,

each folder is automatically allocated a number.

6. To start play, press X/; (a) on the remote controller. To

select a folder to play, press w/x (f) to select the folder.

Play starts automatically when you select a folder.

0 Folders that do not contain music files this unit can

play are skipped.

0 A maximum of 255 folders can be read. This includes

folders that contain files this unit cannot play.

Repeat play/Shuffle play

1. Repeatedly press SHUFFLE/REPEAT (c) to display ,

, or on the display.

: Repeat play of all tracks.

: Repeat play of the selected individual track.

: Play tracks randomly.

To cancel repeat or shuffle play, press SHUFFLE/

REPEAT (c) several times until the icons disappear.

Program play (Music CDs)

You can program up to 32 tracks to play.

1. Press MODE (e).

2. The track number (T--) flashes on the display.

3. Press

:/9 (b) to select the track to register and

press ENTER (g). Repeat this step to register other

tracks. The last track in the program is deleted if you

press CLEAR (d).

4. Press

X/; (a) to start play.

0 If you press MODE (e) again while play is stopped, the

entire program is cleared.

0 Shuffle play and 1 track repeat play cannot be used

while playing a program.

f

g

a

b

d

e

c

F019 T159

CD

1

PROGRAM

P-01<T--

CD

14

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

USB Storage Device/HDD

a

c

d

2

1

b

e

Basic operations

You can play music files by connecting a USB storage

device or HDD (hard disk drive) to the USB port on the front

or rear of the unit.

0 The USB port on the front supports a maximum 5 V/0.5 A

power supply. If the HDD requires more than this,

connect to the USB port (maximum 5 V/1 A) on the rear

of the unit.

1. Turn the unit on.

2. Press USB to select either "USB Front" or "USB Rear".

3. Plug your USB storage device or HDD into the USB port

on the front or rear.

4. Folders and music files are displayed on the display

when loading is complete. Press ENTER (d).

5. Select the folder or music file with the cursors (c) of the

remote controller and press ENTER (d) to confirm. To

return to the previous display, press RETURN (e).

6. Use play buttons (a) to stop play or choose tracks to play.

0 The display of album name, artist name, and album art is

supported with MP3/WMA/Apple Lossless/FLAC/AAC/

USB Front

No Storage

USB

USB Front

USB Storage

USB

15

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

DSD (DSF only) format music files. The formats for

embedded images are JPEG and PNG.

0 Characters that cannot be displayed by this unit appear

as "

¢

".

0 The USB port of this unit conforms with the USB 2.0

standard. The transfer speed may be insufficient for

some content you play, which may cause some

interruption in sound.

Repeat/Shuffle

1. Repeatedly press SHUFFLE/REPEAT (b) during play to

display , or on the display.

: Repeat play of all tracks.

: Repeat play of the selected individual track.

: Play tracks in a folder randomly.

To cancel repeat or shuffle play, press SHUFFLE/

REPEAT (b) several times until the icons disappear.

USB Storage / HDD Device Requirements

0 Note that operation is not guaranteed with all USB

storage devices or HDD.

0 This unit can use USB storage devices that comply with

the USB mass storage device class standard. (However,

there are still devices that cannot be played by this unit

even if they comply with the USB mass storage class

standard.)

0 The unit is also compatible with USB storage devices

using the FAT16 or FAT32 file system formats. Other

formats such as exFAT, NTFS, and HFS cannot be

played by this unit.

0 If the USB storage device has been partitioned, each

section will be treated as an independent device.

0 Up to 20,000 tracks per folder can be displayed, and

folders may be nested up to 16 levels deep.

0 USB hubs and USB storage devices with hub functions

are not supported. Do not connect these devices to the

unit.

0 USB storage devices with security function are not

supported on this unit.

0 If the USB storage device or HDD comes with an AC

adapter, we recommend that you use its AC adapter to

power it.

0 Media inserted to the USB card reader may not be

available in this function. Furthermore, depending on the

USB storage device, proper reading of the contents may

not be possible.

0 We accept no responsibility whatsoever for the loss or

damage to data stored on a USB storage device when

that device is used with this unit. We recommend that you

back up your important music files beforehand.

Supported Audio Formats

For server playback and playback from a USB storage

device, this unit supports the following music file formats.

Note that sound files that are protected by copyright cannot

be played on this unit.

MP3 (.mp3/.MP3):

0 Supported formats: MPEG-1/MPEG-2 Audio Layer 3

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

WMA (.wma/.WMA):

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 5 kbps and 320 kbps and

VBR.

0 WMA Pro/Voice/WMA Lossless formats are not

supported

WAV (.wav/.WAV):

WAV files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.aifc/.afc/.AIFF/.AIF/.AIFC/.AFC):

AIFF files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/

.3G2):

0 Supported formats: MPEG-2/MPEG-4 Audio

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

FLAC (.flac/.FLAC):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF):

0 Supported formats: DSF/DSDIFF

0 Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

1

16

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Internet Radio

Basic operations

When this unit is connected to a network, you can listen to

TuneIn or other preregistered Internet radio services.

Depending on the internet radio service, the user may need

to register from their computer first.

1. Turn the unit on.

2. Press NETWORK.

3. Select "TuneIn Radio" with the cursors (a) of the remote

controller and press ENTER (b) to confirm. After

switching the display to the internet radio service, you

can select stations with the cursors (a) on the remote

controller and press ENTER (b) to confirm. To return to

the previous display, press RETURN (c).

TuneIn

You can register a station you have played as a favorite.

1. Press ENTER (b) while playing TuneIn.

2. Select "Add to My Presets" on the display and confirm.

3. To play a favorite, in the top screen of TuneIn, select the

registered station in "My Presets" and confirm. To delete

favorites, press ENTER (b) during play, select "Remove

from My Presets" and confirm.

a

b

c

1

Network

TIDAL

Deezer

Spotify

TuneIn Radio

17

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Spotify

b

a

c

d

1

4

3

2

Basic Operation

Spotify Connect play is possible by connecting this unit to

the same network as a smart phone or tablet. To enable

Spotify Connect, install the Spotify application on your

smartphone or tablet and create a Spotify premium account.

1. Connect the smartphone to the network that this unit is

connected to.

2. Click the Connect icon in the track play screen of the

Spotify app.

3. Select this unit.

0 This unit is displayed as "Pioneer NC-50DAB

XXXXXX"

4. This unit turns on automatically and the input selector

changes to NETWORK and streaming of Spotify starts.

0 If "Option Setting" - "Power Off Setting" - "Network

Standby" is set to "Off" in the Setup menu, manually

turn the unit on and then press NETWORK on the

remote controller.

0 Refer to the following for Spotify settings:

www.spotify.com/connect/

0 The Spotify software is subject to third party licenses

found here:

www.spotify.com/connect/third-party-licenses

The following remote controller operations are also

possible.

(a) This button plays the previous track.

(b) Pressed during play this button pauses playback.

Pressed while paused, and it restarts play.

(c) This button plays the next track.

(d) Start Repeat or Shuffle play. Pressing this button

repeatedly cycles through the repeat/shuffle modes.

18

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Listening to the FM Radio

Tuning Automatically

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner FM.

3. When you press TUNE i/j (b) on the remote controller,

automatic tuning starts, and searching stops when a

station is found. "Tuned Stereo" or "Tuned Mono" is

displayed when FM stations are being received.

When FM broadcasts are difficult to receive: Perform the

procedure for "Tuning Manually". If the "Tuning Mode" is set

to "Manual", the reception for FM broadcasts will be

monaural rather than stereo, irrespective of the sensitivity of

the reception.

Tuning Manually

You will need to change the initial settings. Press SETUP

(g) on the remote controller and select "Option Setting" -

"Tuner Setting" - "Tuning Mode" - "Manual" on the display

and confirm. Press SETUP (g) to finish the settings.

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner FM.

3. Select the station you want to listen to while pressing

TUNE i/j (b) on the remote controller.

0 The frequency changes by 1 step each time you press

the button. The frequency changes continuously if the

button is held down and stops when the button is

released. Tune by looking at the display.

Registering a station

You can register a maximum of 40 stations.

1. Tune into the radio station you want to register.

2. Press MEMORY (d) on the remote controller so that the

preset number on the display flashes.

3. While the preset number is flashing (about 8 seconds),

repeatedly press PRESET i/j (a) on the remote

controller to select a number between 1 and 40.

4. Press MEMORY (d) on the remote controller again to

register the station. When registered, the preset number

stops flashing.

1

f

h

g

a

b

e

d

c

AUTO

Tuner FM

19

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Selecting registered stations

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select

a preset number.

To delete a registered station

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select

the preset number you want to delete.

3. Press CLEAR (e) on the remote controller to delete the

preset number.

To give a name to a registered station

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select

a preset number.

3. Press SETUP (g) on the remote controller.

4. Press y/z (f) on the remote controller to select "Option

Setting" - "Tuner Setting" - "Preset Name" and press

ENTER (h).

5. Enter a name for the station. For details on how to enter

text, refer to "Entering text" (ÄP29).

Using RDS

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals. In regions using RDS,

the radio station name is displayed when you tune into a

radio station broadcasting program information. When you

press MODE (c) on the remote controller in this state, you

can use the following functions.

Displaying text information (Radio Text)

1. While the name of the station is being displayed on the

display, press MODE (c) on the remote controller once.

Radio Text (RT) broadcast by the station is displayed

scrolling across the display. "Not RDS" is displayed when

no text information is available.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a

malfunction. Also, if the signal from a station is weak,

information may not be displayed.

Search for stations by Program Type

1. While the name of the station is being displayed on the

display, press MODE (c) on the remote controller twice.

2. Press the PRESET i/j (a) on the remote controller to

select the Program Type you want to find, then press

ENTER (h) to start the search.

The Program Types displayed are as follows:

None

News (News reports)

Current affair

Information

Sport

Education

Drama

Cultures

Science (Science and technology)

Varied speech

Pop music

Rock music

Easy listening

Light classics

Serious classi (Serious classics)

Other music

Weather & metr

Finance

Children's pro (Children's programmes)

Social affairs

Religion

Phone in

Travel & touri

Leisure & hobb

Jazz music

Country music

Nation music

Oldies music

Folk music

Documentary

0 The information displayed may sometimes not match

the content being broadcast by the station.

3. "FINISH" is displayed when a station is found and the

frequency display flashes. Press ENTER (h) while this is

happening to start receiving that station. If you don't

press ENTER (h), the unit continues to search for

another station.

0 If no stations are found, the message "Not Found" is

displayed.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a

malfunction. Also, if the signal from a station is weak,

information may not be displayed.

20

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Listening to DAB Digital Radio

Tuning

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner DAB.

0 The very first time you select Tuner DAB, the Auto

Tuning function automatically scans the DAB Band 3

for the multiplexes (i.e., stations) available in your

area.

0 Once the scanning process is complete, the first

station that was detected is selected.

0 If a new DAB station is introduced, or you move to a

new area, press SETUP on the remote controller, then

use "DAB Scan" in "Option Setting" - "Tuner Setting".

3. Select the desired radio station with the cursors (b) on

the remote controller.

Changing the order stations are displayed

You can sort the abailable stations alphabetically or by

multiplex.

1. Press MODE (a) repeatedly to set the method for sorting

the display order from the following.

Alphabet (default setting) : Sort stations alphabetically.

Multiplex : Sort stations by multiplex.

Displaying DAB Radio Information

1. Press the (NOW PLAYING) button (c) repeatedly to

display more information about the selected DAB station.

DLS (Dynamic Label Segment) : When tuned to a

station that's broadcasting DLS text data, the text will

scroll across the display.

Program Type : Displays the type of program.

Bit Rate and Audio Mode : Displays the station's bit rate

and audio mode (Stereo, Mono).

Quality : Displays the signal quality.

0 - 59: Poor reception

60 - 79: Good reception

80 - 100: Excellent reception

Multiplex Name : Displays the name of the current

multiplex.

Multiplex Number and Frequency : Displays the

number and frequency of the current multiplex.

1

b

c

a

Scan: 100%

Tuner DAB

News

ABCD-Station

Tuner DAB

Page is loading ...

Pioneer NC-50DAB User manual

Pioneer NC-50DAB User manual

in other languages

Related papers

Other documents