Ferm GSM1001 Owner's manual

Ferm B.V. • P.O. Box 30159 • 8003 CD Zwolle-NL • www.ferm.com 0405-13

Art.nr. GSM1001

FGS-2400

UK

D

NL

F

E

P

I

S

SF

N

DK

H

CZ

SL

PL

USERS MANUAL 3

GEBRAUCHSANWEISUNG 6

GEBRUIKSAANWIJZING 9

MODE D’EMPLOI 13

MANUAL DE INSTRUCCIONES 16

ISTRUÇÕN A USAR 20

MANUALE UTILIZZATI 23

BRUKSANVISNING 27

KÄYTTÖOHJE 30

BRUKSANVISNING 33

BRUGERVEJLEDNING 36

HASZNÁLATI UTASÍTÁS 39

NÁVOD K POUŽITÍ 42

NOVODILA ZA UPORABO 46

INSTRUKSJĘ OBSŁUGI 49

êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà 52

O  56

RU

GR

www.ferm.com

TÜV

Rheinland

Product Safety

Page is loading ...

62 Ferm

GARDEN SHREDDER FGS-2400

TECHNICAL SPECIFICATIONS

The numbers in the following text are correspon-

ding with the pictures at page 2

PRODUCT INFORMATION

Figure 1

1. Inlet

2. Cover securing knob

3. On/off switch

4. Power connection

5. Leg

6. Ejection port

7. Housing

CONTENTS OF PACKING

1 Main body

1 Leg

4 Bolts

4 Washers

4 Spring washers

1 Axle

1 Large spacer

2 Small spacers

2 Washers

2 Split pins

2 Wheels

2 Wheel caps

1 Allen key

1 Operating instruction

1 safety instruction

1 Warranty card

Check the machine, loose parts and accessories for

transport damage.

EXPLANATION OF SYMBOLS

Read operator’s manual

Danger - Rotating blades. Keep hands and

feet out of openings while machine is run-

ning.

Keep bystanders away

The blades will continue to rotate after

the machine has been switched off.

Beware of objects being flung out.

Wear eye and ear protection

Sound power level

Remove the plug from the wall socket before

carrying out any kind of maintenance.

SAFETY INSTRUCTIONS

Please read these instructions carefully and thorough-

ly before using this appliance and keep them for futu-

re reference. It is very important that you understand

how to use this appliance safely so please take the time

to familiarise yourself with the requirements as outli-

ned in these instructions.

If you are in any doubt what so ever about using this

appliance, we strongly recommend that you employ

the services of a suitably qualified person.

• Keep children and pets well away from the work

area and never allow children to use this appliance

or touch the main power cord or extension cord

at any time. When not in use, keep this appliance

stored in a safe place out of reach of children.

• Wear ear protection and safety glasses at all times

while operating the machine

• Only operate the machine in open space (e.g. not

close to a wall or other fixed object) and on a firm,

level surface.

• Do not operate the machine on a paved or gravel

surface where ejected material could cause injury.

• Before starting the machine, check that all screws,

nuts, bolts, and other fasteners are properly secu-

red and that guards and screens are in place.

Replace damaged or unreadable labels.

• Only use a waterproof, fully unwound extension

cable suitable for outdoor use.

• This appliance is for outdoor use only

• Do not expose this appliance to rain.

• Keep the work area well lit.

• Never leave the appliance unattended.

• Do not use the appliance in an area where it could

cause an explosion or fire - keep it away from flam-

mable liquids and gases.

Art.nr. GSM 1001

Voltage 230 V

Frequency 50 Hz

Power S6 2400 W (40%)

No load speed 2880/min

Max. capacity Ø 40 mm

Feeding capacity 120 kg/h

Weight 23,5 kg

Sound power level 107 dB(A)

IP Class IPX 4

Ferm 3

Ferm 61

• Dress sensibly for the job in hand - no loose clot-

hing that could get caught in the moving parts of

the appliance.

• Always wear safety goggles and a dust mask when

using this appliance.

• Always wear heavy-duty outdoor gloves when

using the appliance.

• Pull long hair back out of the way and wear a pro-

tective hat.

• Guard against electric shock - prevent body con-

tact with earthed or grounded surfaces i.e. metal

gates, posts or other metal objects in the work

area.

• Never pull the appliance by its power cord. Wheel

it or carry it with two hands.

•Do not allow the power cord to lay on or across

sharp objects that might pierce the outer insula-

tion. Carry out a visual inspection of the power

cord before use and if it is damaged, have it

replaced by a specialist service centre. Do not use

the appliance if the cord is damaged.

• Keep the power cord away from heat, frost, oil,

solvents or any sharp objects or edges.

Do not use this appliance if you are on strong medica-

tion, unwell or have been drinking alcohol.

ELECTRICAL INFORMATION

Check that the mains power supply corresponds

to the voltage printed on the appliance rating

plate.

IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN

All electrical connections e.g. extension cable, must be

of an approved waterproof type for outdoor use and

marked accordingly. Extension cables must be three-

core, one of which is EARTH.

Always fully unwind extension cables before use.

ASSEMBLY (fig. 3+4)

Step 1. Attach the legs to the shredder using 4 hex

bolts and tighten with allen key supplied.

Step 2. Attach wheels to legs. Feed spindle through

legs, add spacers at both ends and attach wheels using

a spring clip and washer.

Step 3. Place upright and push-fit wheel caps.

GENERAL USE

WARNING!

NEVER ATTEMPT TO PUT YOUR HAND INSIDE

THE SHREDDER INLET CAVITY. IF YOU WANT TO

PUSH MATERIAL INTO THE CUTTING CHAMBER

USE A SUITABLE STRONG STICK!

• Before starting the machine, look into the feeding

chamber to make certain that it is empty.

• Keep your face and body away from the feed inta-

ke opening.

• Do not allow hands or any other part of the body

or clothing inside the feeding chamber, discharge

chute, or near any moving part.

• Keep proper balance and footing at all times.

Do not overreach. Never stand at a higher level

than the base of the machine when feeding material

into it.

• Always stand clear of the discharge zone when

operating this machine.

• When feeding material into the machine be extre-

mely careful that pieces of metal, rocks, bottles,

cans or other foreign objects are not included.

• If the cutting mechanism strikes any foreign objects

or if the machine should start making any unusual

noise or vibration, shut off the power source and

allow the machine to stop (electric unit disconnect

from supply):

•inspect for damage

• check for and tighten any loose parts

• have any damaged parts replaced or repaired

with parts having equivalent specifications

• Do not allow processed material to build up in the

discharge zone; this may prevent proper discharge

and can result in kickback of material through the

feed intake opening.

•If the machine becomes clogged, shut-off the

power source (electric unit disconnect from sup-

ply) before clearing debris. Keep the power source

clear of debris and other accumulations to prevent

damage to the power source or possible fire.

Remember that operating the starting mechanism

on engine powered machines will still cause the

cutting means to move.

• Keep all guards and deflectors in place and in good

working condition

• Do not tamper with the power source governor

settings; the governor controls the safe maximum

operating speed and protects the power source

and all moving parts from damage caused by over-

speed. Seek authorised service if a problem exists.

• Do not transport this machine while the power

source is running.

• Shut off the power source and disconnect from

supply whenever you leave the work area.

• Do not tilt the machine while the power source is

running.

Your shredder must be placed on firm, level ground.

Never lay the shredder on its back, front or sides -

keep it upright at all times.

Do not overload the shredder - feed it slowly and let

it work at its own pace.

Before use, ensure the inlet cavity is empty. Do not

start the shredder with material in the shredder.

Unless there is an emergency, do not switch the

shredder off until it is completely empty of material.

Remove stones or other hard objects from plant roots

before shredding.

4 Ferm

60 Ferm

Hold large twigs or fine branches firmly when feeding

them into the shredder.

Do not allow the outlet to get covered or blocked at

any time (see ‘Blockages).

BLOCKAGES (fig. 2)

If your shredder gets blocked up at any

time, switch it off at the mains and remove

the plug from the power socket.

Turn the hood knob anti-clockwise until the hood

become loose. Pull it up and away from you to reveal

the inside of the shredder. Clear any blockages, (be

careful not to touch the sharp blades, replace the hood

and re-tighten by turning the hood knob fully clockwi-

se.

Changing a blade

If you suspect your blades need replacing, switch the

shredder off at the mains and remove the plug from

the power socket.

Turn the hood knob anti-clockwise until the hood

become loose. Pull it up and away from you to reveal

the inside of the shredder.

The blades have two edges so they can be turned

around to make use of the unused edge of the blade.

If this has already been done you will need to order

new blades.

Contact your local dealer for new blades.

MAINTENANCE

These appliances are designed to function without dif-

ficulty for a long time and to require minimum mainte-

nance. You will prolong the appliance’s life by cleaning

it regularly and using it correctly.

• When the machine is stopped for servicing, inspec-

tion, or storage, or to change an accessory, shut off

the power source (electric unit disconnect from

supply), make sure that all moving parts have come

to a complete stop and, where a key is fitted remo-

ve the key. Allow the machine to cool before

making any inspections, adjustments, etc.

• When servicing the cutting means be aware that,

even though the power source will not start due to

the interlock feature of the guard, the cutting means

can still be moved by a manual starting mechanism.

Cleaning

Clean the housing regularly with a soft cloth, prefera-

bly every time it is used. Keep the air vents free of dust

and dirt. Remove stubborn dirt with a soft rag moiste-

ned in soapy water. Do not use any solvents such as

petrol, alcohol, ammonia, etc. as such substances can

damage the plastic parts.

Lubrication

The appliance does not need any extra lubrication.

Faults

If a fault arises through wear in an element, please con-

tact the service address shown on the warranty card.

A drawing of the spare parts that may be obtained is

included at the end of these operating instructions.

ENVIRONMENT

To prevent damage during transport, the appliance is

delivered in a solid packaging which consists largely of

reusable material. Therefore please make use of

options for recycling the packaging.

WARRANTY

Read the terms of warranty on the separate warranty

card which is enclosed.

Please contact the service address if you have any

questions regarding accessories and/or batteries.

We take sole responsibility for confirming that

this product conforms with the following standards

or related documents:

EN13683, EN55014-1, EN55014-2,

EN61000-2-3, EN61000-3-3

in compliance with the provisions of the Directives:

98/37/EEC

73/23/EEC

89/336/EEC

from 01-03-2004

ZWOLLE NL

W. Kamphof

Quality department

It is our policy to continuously improve our products

and we therefore reserve the right to change the pro-

duct specification without prior notice.

CE

ı

DECLARATION OF CONFORMITY

(

UK

)

Ferm 5

Page is loading ...

Ferm GSM1001 Owner's manual

This manual is also suitable for

Ferm GSM1001 Owner's manual

in other languages

Related papers

Other documents