VIETA VHP-WB600 User manual

Brand: VIETA

Model: VHP-WB600

Type: User manual

Page is loading ...

VIETA AUDIO S.A. guarantees its products for a period of 24 months. The guarantee period starts on the date of purchase

of brand new products that have never been used by the ﬁrst end user.

This guarantee covers any possible manufacturing ﬂaws for any Vieta products sold on Spanish territory by authorised

distributors. Vieta products acquired in other countries will be covered by the guarantee supplied by the local distributor.

This guarantee will only be valid when accompanied by an invoice for the product that includes the client’s name, the

distributor and the date of purchase. VIETA AUDIO S.A. agrees to repair any product with a problem occurring during

normal use as detailed in the user’s manual and when being used for the purpose for which it was designed.

The guarantee will not be extended because a component is changed or the product is replaced.

INCIDENTS THAT ARE EXEMPT FROM GUARANTEE:

1. The guarantee period exceeds the stipulated time.

2. When the product has been handled by centres or personnel that are not authorised by VIETA AUDIO S.A.

3. When the product has been damaged by incorrect handling or use for purposes other than those it is intended for and

that are not contemplated in the user’s manual, or when it has broken pieces, scratches, cracks, wear and tear, damage

produced by particles of paint, sand, water or food within the unit..

4. This guarantee does not cover expenses or damages caused by transport.

5. Loss, robbery or accidents produced by ﬁre, liquid, chemical substances, excessive heat, inadequate ventilation,

vandalism, electrical storms, incorrect or excessive power supply, lightening, impact, other external forces, radiation.

6. Any additional cost related to installing or uninstalling the product.

7. Products purchased outside Spanish territory or from distributors that are not authorised.

8. The data contained on our products (photo ﬁles, music, digital support, etc.) are not covered by the guarantee under

any circumstance; it is the client’s responsibility to make back-up ﬁles before giving us the product. Likewise, any incorrect

conﬁguration or installation of software or incompatibility issues with hardware belonging to other equipment, including

drivers and controllers.

9. Maintenance, repairs or parts replacement due to use and wear and tear.

10. Rechargeable and/or disposable batteries (life cycle depends on usage frequency).

11. Small faults or variations in the quality of the product that do not affect its value or the purpose for which it was created.

12. Negligence.

13. Accessories:

 Plugs and cases.

 Connector cables.

 Headband.

 Eartip and sleeve kits.

 Decorative ﬁnishes.

14. Any issue detected on receipt of the goods must be notiﬁed to customer care 902.367.607 or sat@vieta.es. In

accordance with article 366 of trade law, VIETA AUDIO S.A. will not accept any claims regarding broken goods, impacts or

missing packages 24 hours after the goods have been delivered.

ENGLISH

Contents

Introduction

....................................................................................................... 10

Packaging

.......................................................................................................... 10

Features

............................................................................................................. 10

Component Identication

................................................................................ 10

Pairing

............................................................................................................... 10

Charging

............................................................................................................ 11

Telephone Call

.................................................................................................. 11

Line-In

............................................................................................................... 11

Technical Specications

.................................................................................. 12

Trouble Shooting

.............................................................................................. 12

WARNINGS

........................................................................................................ 13

TERMS OF GUARANTEE

CUSTOMER CARE / Tel. 34 902 367 607 / Fax. 34 93 574 26 83 / www.vieta.es

ENGLISH

Bluetooth NFC Stereo Headphone

Introduction

This Bluetooth wireless headphone applies the BT 2.1 wireless technology platform that enables you

to enjoy music and video and cell phone handsfree calling anywhere inside or outside your home.

Packaging

1. Bluetooth stereo headphone

2. 2.5mm to USB charging cable

3. 3.5mm to 3.5mm audio cable

Features

1. Bluetooth 2.1 Platform

2. A2DP proﬁle

3. Hands free telephone calling

4. Stereo music

5. Operating distance up to 10 meters

6. Auto Shut-Off

7. Operation time up to 10 hours (median volume

level)

8. Line-in function for wired headphone

application

Component Identiﬁcation

1. Power LED Indicator

2. Power / Pair / Talk

3. Volume+, Volume -

4. 3.5mm Audio In Jack

5. 2.5mm Charge in Jack

6. Microphone

7. NFC

Pairing

1. Press the Power button, the LEDs indicator

light will be on. Keep pressing the power button

until the LED ﬂashes in blue.

2. Enable your Bluetooth device such as cell

phones, tablets or other BT media, and make

sure it is at searching mode.

3. Choose “Vieta VHP-WB600BK /

VHP-WB600WH” in the list shown in the BT

device, enter “0000” if password is required.

4. When Bluetooth connection is made, the LED

will ﬂash slowly.

5. Listen your music or make/take your telephone

call on the headphone

6. The transmission is approx. 10 meters.

When the paired receiver is out of range

from BlueTooth device, it will disconnect. The

transmission will be resumed by pressing the

power button on the receiver within the

operating range.

Alternatively, pairing by One-touch

connection with Near Field Communications

(NFC)

1. Press the power button and keep pressing

until the blue LEDS ﬂashes, the headphone will

enter pairing mode immediately.

2. Enable your Bluetooth device such as cell

phones, tablets or other Bluetooth media.

3. Make sure the NFC is enabled in your device.

4. Use your NFC enabled device and touch

the NFC logo on the speaker (as shown in the

diagram) , a “beep” sound indicates pairing is

successfully done.

5. When Bluetooth connection is made, blue LED

will ﬂash slowly.

Note: To re-enter to pairing mode after the

headphone is on, you need to switch off the

headphone and restart it by doing step 1.

Charging

1. Make sure the headphone is fully charge

before initial use.

2. Connect headphone with your PC by the

supplied 2.5mm to USB cable for charging.

3. Charging is workable to connect with other

power adapter with USB jack at 5V 500mA

speciﬁcations.

4. The charging LED will illuminate when

charging is under processing. Charging will be

ﬁnished when LED becomes Green.

Telephone Call

1. If there is an incoming call when streaming

music on headphone, the music will be muted

and ring tone will be heard.

2. Take your call by pressing the Power/Pair/Talk

button. Press once again when ending the call.

Music will come out again automatically.

3. To make a call, simply dialing at your cell

phone, and talk at the headphone.

*Check the instruction manual for your cell

phones, if getting any process different from the

above.

Line-In

1. Connect the headphone with your audio

device directly by the supplied 3.5mm cable

2. The Bluetooth wireless music will be by pass

after line-in connection is made

ENGLISH

Bluetooth NFC Stereo Headphone

Technical Speciﬁcations

WARNINGS

1. Do not covering the ventilation.

2. No naked ﬂame sources, such as lighted

candles, should be placed on the apparatus.

3. Battery shall not be exposed to excessive heat

such as sunshine, ﬁre or the like.

4. No objects ﬁlled with liquids, such as vases,

shall be placed on the apparatus.

5. The apparatus shall not be exposed to

dripping or splashing.

6. The On/Off switch is a secondary functional

switch and not for disconnection of the mains

supply.

7. Do not dispose of electrical products in the

general waste and ensure the used product or

batteries are disposed safely according to your

local authority and regulations.

8. No replaceable parts inside, repair work

should be carried out by manufacturer or

authorized agent.

9. The risks of hearing impairment due to

exposure to music or other sounds may be

reduced by listening at lower volumes and for

shorter durations.

Carrier Frequency: Blue Tooth 2.1

Battery Capacity: 3.7V 470mA via built-in Lithium

rechargeable battery

Frequency Response: 20Hz – 20KHz

Distortion: 0.5%

S/N Ratio: 65dB (typical)

Channel Separation: 50dB (Typical)

Operation Distance: Up to 10 meters (open area)

Trouble Shooting

NO SOUND



Ensure the headphone is charged and with enough power for operation



Ensure the headphone is switch ON.



Ensure BT device is ON.



The volume of speaker is too low, adjust the volume to an appropriate level.



Unable to connect with Blue Tooth device, RESET the headphone by pressing and holding the

Power/Pair/Talk for 12 seconds.

Battery warning

Caution: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Safety warning

Battery shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

10. Warning: Listening at high volumes from

earphones and headphones can cause hearing

loss.

11. Caution: Danger of explosion if battery is

incorrectly replaced. Replace only with the same

or equivalent type.

Page is loading ...

VIETA VHP-WB600 User manual

Brand: VIETA

Model: VHP-WB600

Type: User manual

Download PDF

report

in other languages

français: VIETA VHP-WB600 Manuel utilisateur
español: VIETA VHP-WB600 Manual de usuario
Deutsch: VIETA VHP-WB600 Benutzerhandbuch

VIETA VHP-WB600 User manual

VIETA VHP-WB600 User manual

in other languages

Related papers

Other documents