Socomec DIRIS A60 Operating instructions

DIRIS A60

Operating instructions

F GB

D I

NL E P

2

DIRIS A60 - Ref.: 536 418 A GB

DANGER AND WARNING _______________________ 3

PRELIMINARY OPERATIONS ____________________ 4

PRESENTATION ________________________________ 5

INSTALLATION _________________________________ 6

PROGRAMMING ______________________________ 12

OPERATION __________________________________ 43

CONNECTION TEST FUNCTION ________________ 48

ASSISTANCE _________________________________ 52

TECHNICAL CHARACTERISTICS ________________ 53

GLOSSARY OF ABBREVIATIONS _______________ 56

Contents

3

DIRIS A60 - Ref.: 536 418 A GB

This equipment must be mounted only by professio-

nals.

The manufacturer shall not be held responsible for

failure to comply with the instructions in this manual.

Risk of electrocution,

burns or explosion

• the device must be installed and serviced only by

qualiﬁed personnel

• prior to any work on or in the device, isolate the

voltage inputs and auxiliary power supplies and

short-circuit the secondary winding of all current

transfromers (PTI SOCOMEC)

• always use an appropriate voltage detection device

to conﬁrm the absence of voltage

• put all mechanisms, door and covers back in place

before energising the device

• always supply the device with the correct rated vol-

tage

Failure to take these precautions could cause serious

injuries.

Risk of damaging device

Chek the following :

• the voltage of the auxiliary power

• the frequency of the distribution system (50 or

60 Hz)

• the maximum voltage across the voltage-input ter-

minals, (V1, V2, V3 and VN) 500 V AC phase-to-

phase or 289 V AC phase-to-neutral

• a maximum current of 6 A on the current-input ter-

minals (I1, I2 and I3)

DANGER AND WARNING

4

DIRIS A60 - Ref.: 536 418 A GB

DANGER AND WARNING

For personnel and product safety please read the

contents of these operating instructions carefully

before connecting.

Check the following points as soon as you receive

the package:

• the packing is in good condition,

• the product has not been damaged during transit,

• the product reference number conforms to your

order,

• the packaging included a product ﬁtted with deta-

chable terminal strips,

• operating instructions.

5

DIRIS A60 - Ref.: 536 418 A GB

PRÉSENTATION

1. Key-pad with 6 dual-function keys (display or pro-

gramming)

2. Backlit LCD display

3. Phase

4. Values

5. Unit

6. Activity indicator on the communication bus

7. Energy metering indication

8. Hour meter and energy display

9. Alarm relay 1

10. Alarm relay 2

6

DIRIS A60 - Ref.: 536 418 A GB

INSTALLATION

• avoid being close to systems generating elec-

tromagnetic disturbances,

• avoid vibrations involving accelerations greater

than 1 G for frequencies lesser than 100 Hz.

RECOMMENDATIONS

CUT-OUT DIAGRAM, MOUNTIG

3.62

+0.03

in

92

+0,8

mm

0

3.62

+0.03

in

92

+0,8

mm

0

Max. 0.31 in

Max. 8

mm

ni 87.3

mm 69

3.82 in

97 mm

ni

4

5

.

3

mm 09

0.94 in

24 mm

ni 02.2

mm 65

ni 51.3

mm 08

ni 28.0

mm 12

3.54 in

90 mm

7

DIRIS A60 - Ref.: 536 418 A GB

CONNECTION

Each CT’s secondary winding must be

short-circuited when disconnecting the

DIRIS. This can be done automatically using

one of Socomec’s catalogue products: the

PTI. Please contact us for further informa-

tion.

DIRIS A60

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

DIRIS A60

INSTALLATION

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN

1

2

81

71

+

-

Input Synchro

10...30 V DC

0.24 in / 6 mm

Flat 3,5

0,5 mm² - 2,5 mm²

0.27 in / 7 mm

Flat 5,5

Pozidriv 1

0,5 mm² - 6 mm²

7lb-in / 0.8Nm

3.5lb-in / 0.4Nm

8

DIRIS A60 - Ref.: 536 418 A GB

INSTALLATION

MODULES OPTION

DIRIS A60 can be ﬁtted with optional modules:

- JBUS/MODBUS communication;

ref: 4825 0092:

RS485 JBUS/MODBUS serial port in RTU

mode with a speed from 2400 to 38400 baud.

(Operating instructions ref: 536 103).

- PROFIBUS-DP Communication;

ref: 4825 0205:

RS485 PROFIBUS-DP serial port with a speed

from 9,600 baud to 12 Mbaud.

(Operating instructions ref: 535 749).

- Pulse outputs; ref: 4825 0090:

2 pulse outputs connected to the metering of

energy in kWh, kvarh and KVAh.

(Operating instructions ref: 536 045).

- Analogue outputs; ref: 4825 0093:

2 analogue outputs 4/20 mA or 0/20 mA conﬁ-

gurable for measures performed by the DIRIS

A60. 2 modules can be installed, a maximum

of 4 outputs.

(Operating instructions ref: 536 048).

- Inputs/Outputs; ref: 4825 0094:

2 outputs allocated for alarms, for voltage, cur-

rent, power, power factor and THD, or remote

control.

2 inputs for the metering of pulses or control-

ling position.

(Operating instructions ref: 536 047).

- Ethernet; réf : 4825 0203 :

Link with RJ45 connector.

Protocol MODBUS/TCP or JBUS/

MODBUS RTU with TCP. WEB-ser-

ver for configuration of the product, dis-

play of the main quantities and diagnosis.

(Operating instructions ref.: 535 748).

- Ethernet/gateway RS485; ref: 4825 0204:

Link with RJ 45 connector.

Master gateway function MODBUS with 3

points link RS485.

Protocol MODBUS/TCP or JBUS/MODBUS

RTU with TCP. WEB-server for the conﬁgura-

tion of the product, display of the main quan-

tities and diagnosis.

(Operating instructions ref.: 535 748).

- Temperature; ref: 4825 0206.

PT100 Technology:

4 temperature indicators :

- 1 internal

- 3 external (PT100 input)

(Operating instructions ref.: 535 750).

- Operating earth; ref.: 48250087

(Operating instructions ref.: 536 423).

DIRIS 343 A

9

DIRIS A60 - Ref.: 536 418 A GB

DIRIS 272 E

UNBALANCED THREE-PHASE NETWORK

(4NBL)

UNBALANCED THREE-PHASE NETWORK

(3NBL)

DIRIS A60

INSTALLATION

DIRIS 278 D

DIRIS 280 DDIRIS 276 C

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

P1

S1

P1

S1

L1

(

R

)

L2

(

S

)

L3

(

T

)

P1

S1

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

2

1

2

L1

(

R

)

L2

(

S

)

L3

(

T

)

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

P1

S1

P1

S1

2

1

L1

(

R

)

L2

(

S

)

L3

(

T

)

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

P1

S1

P1

S1

2

1

2

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

10

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

INSTALLATION

BALANCED THREE-PHASE NETWORK (3BL/4BL)

The solution using one CT, with the 3rd phase

current calculated via vectoral summation, results

in an 0.5% reduction in phase accuracy.

P1

S1

L1

(

R

)

L2

(

S

)

L3

(

T

)

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

2

1

2

DIRIS 282 D

1

2

L1

(

R

)

L2

(

S

)

L3

(

T

)

S2 S1 S2 S1 S2S1

I2 I3I1

N

P1

S1

V1 V2 V3 VN AUX

2

DIRIS 679 B

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

11

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

INSTALLATION

TWO-PHASE NETWORK (2BL)

SINGLE-PHASE NETWORK (1BL)

DIRIS 284 D

N

P1

S1

L1

(

R

)

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

2

1

2

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

AAA

aaa

L1 (R)

L2 (S)

L3 (T)

V1 V2 V3

1

2

DIRIS 680 B

VOLTAGE TRANSFORMER

P1

S1

L1

(

R

)

L2

(

S

)

S2 S1 S2 S1 S2S1

I2 I3I1

V1 V2 V3 VN AUX

2

1

2

DIRIS 285 D

Å Aux.: IEC / CE 110 … 400 V AC

120 … 350 V DC

12 … 48 V DC

Ç Fus.: 0.5 A gG / BS 88 2A gG / 0.5 A class CC

12

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

ACCES TO PROGRAMMING MODE (COdE 100)

x 1

conﬁrm

x 1

3 sec

13

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

NETWORK (Example : NET = 3NBL)

x 1

x 1(1BL)

x 2 (2BL)

x 3 (3BL)

x 4 (3NBL)

x 5 (4BL)

x 6 (4 NBL)

x 1

conﬁrm

14

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

x 1

conﬁrm

NOMINAL VOLTAGE OF THE NETWORK (phase/phase) (Example: 4NBL: U=390V)

This value is used for calculating the sliding

reference voltage (Ureg) for the detection of the

voltage dips and interruption, as well as voltage

swell.

15

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

CURRENT TRANSFORMERS (Example : CT = 1500 / 5A).

Maxi 10000/5 ou 10000/1

x 2

x 1

conﬁrm

16

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

VOLTAGE TRANSFORMER (Example : Vt = YES)

x 1

conﬁrm

17

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

VOLTAGE TRANSFORMER PRIMARY (Example : PR = 20 000 V)

x 2

x 1

conﬁrm

18

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

VOLTAGE TRANSFORMER SECONDARY (Example : SE = 110 V)

x 1

x 1 (110)

x 2 (115)

x 3 (120)

x 4 (173)

x 5 (190)

x 6 (60)

x 7 (100)

x 1

conﬁrm

19

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

INTEGRATION PERIOD OF AVERAGE AND MAXIMUM CURRENTS

(Example : tIME 4I = 20 min)

x 1

x 1 (20 min)

x 2 (30 min)

x 3 (60 min)

x 4 (2 sec)

x 5 (10 sec)

x 6 (5 min)

x 7 (8 min)

x 8 (10 min)

x 9 (15 min)

x 1

conﬁrm

20

DIRIS A60 - Ref.: 536 418 A GB

DIRIS A60

PROGRAMMING

INTEGRATION PERIOD OF AVERAGE AND MAXIMUM VOLTAGES

(Example : tIME U/V = 20 min)

x 1

x 1 (20 min)

x 2 (30 min)

x 3 (60 min)

x 4 (10 sec)

x 5 (5 min)

x 6 (8 min)

x 7 (10 min)

x 8 (15 min)

x 1

conﬁrm

Page is loading ...

Socomec DIRIS A60 Operating instructions

This manual is also suitable for

Socomec DIRIS A60 Operating instructions

Related papers

Other documents