2. Graco
  3. 3A1701A

Graco 3A1701A, 3A1701A - CleanShot Replacement Kit for Fine Finish Hand-Held Sprayers Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Graco 3A1701A Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3A1701A
Operation
CleanShot Replacement Kit for
Fine Finish Hand-Held Sprayers
IMPORTANT SAFETY INSTRUCTIONS
For complete warnings and safety
instructions, see sprayer manual.
ENG
ti17030a
CleanShot Replacement Kit 24J433
Pressure Relief Procedure
1. Engage trigger lock.
2. Put prime/relief valve UP to release pressure.
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the front of the sprayer.
For example, do not try to stop the paint flow with any
part of the body.
This sprayer builds up an internal pressure of 1700 psi
during use. Follow this Pressure Relief Procedure
whenever you stop spraying and before cleaning,
checking, servicing, or transporting equipment to
prevent serious injury.
ti16699a
ti16700a
Replacement Instructions
2 3A1701A
Replacement Instructions
1. Perform Pressure Relief Procedure, page 1.
2. Remove Tip/Guard Assembly.
3. Place CleanShot tool onto socket wrench with
1/4 in. extension.
4. Use four-flute end of supplied tool to remove old
CleanShot valve.
NOTE: If CleanShot valve has been broken, use four-pin
end of supplied tool to remove old CleanShot.
5. Install new CleanShot valve, make sure o-ring
between pump and valve is installed. Torque valve
to 150 in-lb.
ti17029a
Use this end only if
CleanShot is broken
ti17031a
ti17032a
NOTICE
IT IS CRITICAL that the four-pins of the socket be
FULLY inserted into the four holes of the broken valve,
and the rachet be pushed into the valve as it is being
removed. If the socket is not fully inserted, the pins may
break and the tool will be destroyed.
ti17033a
ti17034a
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A1701
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2011, Graco Inc. is registered to ISO 9001
www.graco.com
Revision A, 03/2011
/