COMPRO IP60 User manual

IP60

Intelligent Megapixel/HD

H.264 Network Camera

User’s manual

IP60 IP Camera User’s Manual

2

www.comprousa.com

may be copied or reproduced in any form or by any means without the prior

written consent of Compro Technology, Inc.

Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are

trademarks of Compro Technology, Inc. Other names and marks are

trademarks of their respective owners.

COMPRO makes no warranties with respect to this documentation and

disclaims any implied warranties of merchantability, quality, or fitness for any

particular purpose. The information in this document is subject to change

without notice. COMPRO reserves the right to make revisions to this

publication without obligation to notify any person or entity of any such

changes.

Compro Technology, Inc.

www.comprousa.com

Tel. +886 2 2918 0169, Fax +886 2 2915 2389

4/F, No.12, Alley 6, Lane 45, Pao Shin Road Hsintein City, Taipei, Taiwan.

Support e-mail: support@comprousa.com

IP60 IP Camera User’s Manual

3

Table of Contents

Important Safety Notice............................................................................... 4

Product Overview ........................................................................................ 5

Package Contents ..................................................................................... 5

Product Description .................................................................................. 6

Key Features ............................................................................................. 7

Specifications ........................................................................................... 7

System Requirements .............................................................................. 9

Hardware Installation ................................................................................ 10

Hardware Overview (Name of Each Part) .............................................. 10

Connect Your IP Camera ........................................................................ 11

Wireless Connection .............................................................................. 12

Disassembly and Assembly the Camera Stand ....................................... 13

Mounting on the Wall or Ceiling ............................................................... 14

Software Installation .................................................................................. 16

Controls the IP camera in Internet Explorer ......................................... 30

Configuring the IP camera ..................................................................... 32

Access the IP Camera via iPhone/mobile device .................................... 45

Access the IP Camera via 3GPP Mobile Phone ....................................... 46

The Internet Setting ................................................................................... 47

DDNS Setup and Port Forwarding ............................................................ 48

Firmware Update........................................................................................ 52

Troubleshooting ........................................................................................ 53

Initial Hardware / Software Setup .......................................................... 53

Trouble with the ActiveX Client ............................................................. 55

Remote Viewing via Internet Explorer ................................................... 57

IP60 IP Camera User’s Manual

4

Important Safety Notice

Please follow the steps below to protect your IP camera:

 Please place the IP camera on a level surface and out of direct sun shine.

 Please keep the IP camera inside house and away from water, dust,

humidity or magnetic products.

 Please do not drop the IP Camera body to the floor; it may cause the

damage to main parts.

 Please do not disassemble or remodel the product, it may cause damage

or fire.

 Do not shake, move or disturb the IP camera when it is in operation, as

such actions may result in the malfunction of the device.

 Power off the IP Camera as soon as it is found smoking or smelt unusual.

 Please do not place the IP Camera around the heat sources, such as

television or microwave oven.

IP60 IP Camera User’s Manual

5

Product Overview

Package Contents

Please check the package contents on your hand, if anything is missing,

please don’t hesitate to contact with your local distributor.

Important!

Please do not use the adaptor that not from Compro technology, it may cause

damage of your IP camera.

IP60

Network Camera RJ-45 LAN

Cable

Power Adaptor

(5V, 2A)

Installation CD

Installation Guide Screw for Ceiling

Mount x 3

Screw Mount x 3

IP60 IP Camera User’s Manual

6

Product Description

IP60 provides an easy-to-install way for the indoor fixed camera solution.

Combined with the H.264/MPEG-4/MJPEG video compression formats,

superior performance and high video quality are achieved with much smaller

recording file size, which means much lower costs for data storage. Utilizing

smart motion detection, with built-in 2-way audio for fast and easy

communications, IP60 ensures instant responses when security is

compromised. In addition, the IP60 built-in the compact MicroSD slot for local

image storage.

High Quality Megapixel/HD Image

Utilizing Megapixel/HD technology enables IP60 to view detail and identify

people and objects at least three times better than the conventional CCTV

camera. Combining with dual H.264 and MPEG-4 or MJPEG streams to

enable optimization of different bandwidth of networks and various image

sizes of devices from PC to mobile phone.

Smart Video and Audio Analytic

IP60 provides two-way audio support of a built-in microphone and speaker,

allowing remote listening of the area via direct voice communication or

pre-recorder audio clips. It also comes with a suite of special professional

grade intelligent video analytic features such as smart video detection, smart

audio detection, and active scene change alarm for proactive surveillance

applications.

Easy Wireless Network Installation

802.11 b/g/n wireless LAN is supported via the WL150 USB upgrade module

with a simple and easy wireless installation process. (Optional Accessory)

Total Surveillance Solution for Home and Business

IP60 bundles a full range of applications to provide an intelligent surveillance

total solution - iWizard is a smart installer to turn the complicated network

camera installation to a simple and fast process; WebVUer is an intuitive IE

based video management software includes all the key features for

trouble-free monitoring home surveillance; ComproView is a powerful feature

rich 32 channels professional grade multi-camera video management solution

for business surveillance.

IP60 IP Camera User’s Manual

7

Key Features

 1/4" CMOS Megapixel sensor

Supports real-time H.264, MPEG-4 and MJPEG compression (Triple

Codec)

 Supports dual streams simultaneously

 Support 4x digital zoom

 Video resolution is up to 1280 x 1024 pixels

 Image frame rate is up to 30 frames under 640x480 or 15 frames under

1280 x 1024

 Smart motion detection

 Two way audio with built-in MIC and speaker

 Support UPnP (universal plug and play)

 Support 10/100 802.3/Ethernet

 802.11b/g/n WLAN on applicable model (Optional wireless adaptor)

 Digital I/O for External Sensor and Alarm (2 In/1 Out)

 Supports local storage (MicroSD), Snapshot

 Easy to Install with VideoMate IP camera Wizard

 Remote Monitoring from 3GPP Mobile or Phones with web browser

(e.g. iPhone/BlackBerry)

 Bundle with powerful 32-channel IP video management software ---

VideoMate ComproView

Specifications

Camera

Image Sensor

1/4" CMOS Megapixel sensor

Lens  Focal Length: 4.5 mm

 Max Aperture Ratio: F2.0



Fixed iris

Zoom

4x digital zoom

Angle of View 46° horizontal

Focusing Range

0.5m ~ INF

Minimum

Illumination

Color Mode: 1.0 lux

Shutter Time

1/5 ~ 1/16000 Sec

Video

Compression

 H.264 ( MPEG-4 Part 10)

 Motion JPEG



MPEG-4 Part 2

IP60 IP Camera User’s Manual

8

Resolutions

160x120, 320 x 240, 640 x 480, 1280 x 1024

Frame Rate  Up to 30 frames at 640 x 480



Up to 15 frames at 1280 x 1024

Video Streaming

Dual H.264, MJPEG or MPEG-4 video streams

Image Settings  Adjustable image size and quality

 AGC, AWB, AES



Configurable brightness, saturation and

sharpness

Audio

Communication

Two-way audio with built-in MIC (S/N ratio 58

dB, 50-10000hz ) and speaker (660mv)

Audio

compression

G.711 PCM 64Kbit/sec

Audio input /

output

MIC input / Audio out

Network

Security

User ID / Password protection

Supported

Protocols DDNS (iDDNS) / PPPoE / HTTP Server / DHCP

Client /NTP Client /DNS Client / FTP Client / SMTP

Client / ARP / ICMP/IPV4/ UDP / TCP/IP

Firmware

Firmware  Support UPnP



Support online firmware update

Software

ComproView  Multiple channel management



iDDNS service for dynamic IP and desktop

shortcut creation

 Recording search and playback

 Scheduled and event driven management



Smart Detection

Web Browser

Internet Explorer

(ActiveX)

 Monitor the current condition of the monitor area

via Internet Explorer

 Capture a still image and save it in JPG format on

PC



Alarm and event management: FTP, I/O alarm,

server notification and email

Supported

Devices

 PC, Laptop, Nettop, MID with IE/ActiveX support.



Mobile phone, iphone/ipod, PDA support in

IP60 IP Camera User’s Manual

9

MJPEG mode.

Mobile Phone

MJPEG Mode

Viewing of camera image via phone browsers

3GPP Mode Viewing of camera image via 3G phones

(3GPP Streaming)

General

Operating

Condition

5 °C ~ 40 °C

Power Supply

DC 5V/2A

System

Requirements

 Computer with 1.7GHz

processor and 512 MB

memory or above



Supported Operating Systems: Windows XP

SP3, Vista SP1, Windows 7 x86/x64

Included

Accessories

 Software CD (Manual included)

 Start up Guide

 Power adaptor

 Network cable

 Screws for ceiling mounting



Screw mount

Dimensions

84 x 124.5 x 91.5 mm (including bracket)

System Requirements

 Computer with 1.7GHz processor and 512 MB memory or above

 Supported Operating Systems : Windows XP SP3, Vista SP1, Windows 7

x86/x64

 Supported Web Browsers (ActiveX): Internet Explorer 6 or later

IP60 IP Camera User’s Manual

10

Hardware Installation

Hardware Overview (Name of Each Part)

Lens

Speaker

Microphone

LED Light

Wireless Adaptor

Connector

(USB type)

LAN Port

Microphone Input

Power

Audio Output

I/O port

(2 in / 1 out)

Reset Button

MicroSD card slot

(On the right side)

IP60 IP Camera User’s Manual

11

Connect Your IP Camera

The picture below shows the basic connection of IP60 camera:

1. LAN cable from hub/router to PC: If your LAN cable from PC has been

connected to the Cable/ADSL MODEM before, please re-connect it to the

LAN port of your hub/router.

2. LAN port on camera: Using the bundled RJ-45 LAN cable to connect IP

camera with the LAN port of your hub/router.

3. Wireless adaptor (Optional accessory): If you have purchase the

Compro USB wireless adaptor for wireless connection upgrade, please

plug it into the USB port of IP camera for wireless reception.

4. Power: Attach the power adaptor to the camera’s power socket and

connect it to the power outlet.

Important!

The wireless connection port only supports the wireless adaptor from Compro;

please do not use other USB adaptor on Compro IP camera.

To

MODEM

IP60 IP Camera User’s Manual

12

Wireless Connection

With the IP60 wireless adaptor, you also have the option of using the wireless

connection method. Please keep in mind that you can only have one active

connection only, via LAN or wireless.

If user connects the IP camera on the intranet, then the same group of user

can share that IP camera to use. Please ensure that the wireless adaptor had

been securely fastened, otherwise it could lead to unstable connection.

Important!

1. The operation of the IP60 wireless network may be interfered should there

be other 2.4GHz devices working in the vicinity, e.g. microwave oven,

digital cordless camera, etc. You may experience slow frame rate or drops

in connection; up on such situation, we suggest that you try to move the IP

camera around the area or try to shut off other appliances.

2. Since wireless cameras cause interferences during transmission, you may

encounter erratic behaviors when there are more than 10x operating in

close proximity.

3. The default wireless connection method is via 802.11n standard and you

should experience a stable connection of up to 20 meters between the

access point and the camera unit. Your wireless performance may vary

depending on the operating environment, building material, etc.

IP60 IP Camera User’s Manual

13

Disassembly and Assembly the Camera Stand

The camera stand is already install to the camera when it out from Compro, if

you need to disassemble and assemble the stand, please follow the picture

below to disassemble and assemble it.

Disassembly (Please use the slotted screwdriver to disassemble it.)

Assembly

IP60 IP Camera User’s Manual

14

Mounting on the Wall or Ceiling

If user wants to set IP60 on the wall or ceiling, please use the screws to fix the

bracket on the flat surface. After the bracket is fixed on the wall, please try to

adjust the angle to the desire position.

Important!

If the power cable (IP60) and the network cable (IP60) are not securely

fastened, it could lead to unstable connection.

IP60 IP Camera User’s Manual

15

IP60 Digital I/O Connector Block

The I/O connector on the back of the IP60 provides a central interface

between your home security system and various output devices.

The two digital inputs are normally used with security sensors, e.g. passive

infrared sensor (PIR), smoke detector, door/window open sensor, etc. This

input works by detecting a change in the state, open and closed circuit. You

can check the status of the circuit by going to the Setup > Event Setup > I/O

Status.

The output port is normally used to trigger external audio or visual indicators,

e.g. sirens or strobe lights, etc.

Pin Name Specification Note

1 – 4 Digital Input Ports

1 & 2

Max 5VDC,

60mA

Floating, TTL

5 - 7 Digital Output Port Max 24VDC, 1A

or

Max 125VAC, 1A

You can only use either

the normally open (NO) or

normally closed (NC) at

any given time.

Important!

The above output scenario is where the siren will only sound when it the input had

been triggered. Should you wish to use the other way where the output device is

always on when it had not been triggered, please use NC.

IP60

IP60 IP Camera User’s Manual

16

Software Installation

Before Compro software installation, user has to make sure the IP Camera is

beside you. The wizard of ComproView Installer on the installation CD will help

you to step-by-step install IP camera hardware and software on your system.

1. Insert the Compro software

installation CD to CD-ROM drive,

the installer will automatic start for

installation, please select the

display language at first.

2. Please click “IP Camera Setup”

and select IP60 to install your IP

camera. Also, you can select other

icons to open the related

documents, browse CD contents,

or exit.

3. Step1: Connect your camera as

the picture shown, or you can click

to watch the tutorial video. After

connect all the network and power

cables, please click “Next”.

If you already connect your IP

camera cables, you can skip this

step and click “Next” to continue.

IP60 IP Camera User’s Manual

17

4. Check the LED light of IP camera is

working properly. And click “Next” to

searching your camera.

5. If you see the Windows Security Alert

while searching your camera, please

click “Unblock”.

6. Step2: The wizard will searching all

the available cameras from your local

network.

7. You can select your camera from the

list on the left side, and it will display

video live view and camera

information on the right side.

(You can double check the device

name with the MAC ID, the MAC ID

will be print in the serial number

sticker on the back side of IP camera

or in the package box)

IP60 IP Camera User’s Manual

18

8. Step3: We recommend you input

the new password to protect your

system. Or you can click “Next” to

pass this process.

(The default password is “admin”)

9. Please check the camera name, date

and time settings.

10. Select your IP address

configuration by DHCP (Obtain IP

address automatically) or you can

manually input IP address

information, allows iWizard to auto

configuration your firewall, setup

connection port, and frequency of

your local power.

11. Step4: If you already connect the

Compro wireless adaptor on your IP

camera, please click “Yes” and it

will search for the available SSID of

wireless AP/router, please select

the AP/router you want.

IP60 IP Camera User’s Manual

19

12. (For Wireless connection only.) Select

the encryption method and input

passphrase, then select the IP

address configuration.

13. Step5: If you want to use iDDNS

service, please click “Yes” and input

the address name you desire, then

click “Check Availability” to check

the input address name is not being

used by others. When success, you

can click “Create Shortcut” to create

the shortcut on your desktop for more

convenient use.

Important!

The iDDNS is a free DDNS (Dynamic Domain Name Service) service from

Compro. If you are using floating IP, you need to apply the DDNS service to

create a hostname that points to your home or office IP address, and provides

easy-to-remember URL for quick access in anytime, anywhere. After

succeeded create the iDDNS address name, you only need to using http://xxx

(input by yourself).iddns.org to access your IP camera from browser.

If your local LAN and router have setup firewall to prevent attack from outside,

you have to setup the http port from your router.

For example, if you are setting the http port “2001” for your IP camera, your IP

camera address will be

http://xxx (input by yourself).iddns.org:2001

IP60 IP Camera User’s Manual

20

14. Step6: Here will display the old and

new settings, if ok, please click “Next”,

or click ”Previous” back to previous

settings.

15. Step7: System will saving and reload

the new settings on your camera.

16. Step8: The iWizard will running

network diagnostics on your network

settings and warning the inappropriate

settings.

17. Step9: You can click the link on the

screen to direct access the web page

of your IP camera, and if you want to

setup another IP camera, please click

“Yes”, or click “No” to install the

ComproView software.

Page is loading ...

COMPRO IP60 User manual

COMPRO IP60 User manual

Related papers

Other documents