APPLICATION INSTRUCTIONS
GacoRoofTape
Self-Adhesive Seam Tape 2" x 50'
GACOROOFTAPE APPLICATION INSTRUCTIONS
Surface must be COMPLETELY CLEAN AND DRY before applying GacoRoofTape. Cut tape to desired length and peel off release liner. Center
tape over seam and firmly press into place, removing all buckles and bubbles. If applying over fasteners, press tape over all sides to conform
tape to the shape of the fastener. If more than one piece is going to be used, overlap any adjoining pieces of tape by a minimum of ½".
GacoRoofTape must not be left exposed; coat with a GacoFlex silicone coating. If necessary, any tools may be cleaned with GacoFlex Silicone
Solvent or 100% pure mineral spirits.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Chicago Electric Model 94849 User manual
-
Gardner 4602-GA User manual
-
BLACK JACK 9086-1-75 User manual
-
Huber 777198 Operating instructions
-
SoterraSlate HDS3460-76DS-MCE Installation guide
-
Ella 6030 BF 5P 1.0 R-WH ELW User manual
-
IVC C3950.195C890P158 Installation guide
-
Bondera Countertop Roll Installation guide
-
SIG SIGCL19 User manual
-
Kohler K-97630-0 Installation guide
