Contec ECH-PCI-DE-H4D Reference guide

Type
Reference guide

This manual is also suitable for

Reference Manual
CONTENTS
PC-HELPER Series
PCI Bus Expansion Chassis
Short size, 4-Slots, Silver
ECH-PCI-DE-H4D
Introduction .................................................................. 4
Safety Precautions .................................................... 12
Setup ............................................................................. 18
Connection and Installation ................................. 33
Appendix ...................................................................... 38
Customer Support and Inquiry ............................ 42
2
Table of Contents
Introduction ...................................................................... 4
1. Related Manuals ......................................................................................................................................................5
2. About the Product ..................................................................................................................................................6
3. Features ......................................................................................................................................................................7
4. Product Configuration List ..................................................................................................................................8
5. Expansion Adapter (Optional product) ..........................................................................................................9
6. Combinations of Expansion Adapters and Expansion Chassis .......................................................... 10
7. Restrictions ............................................................................................................................................................. 11
Safety Precautions ......................................................... 12
1. Safety Information ............................................................................................................................................... 13
2. Handling Precautions ......................................................................................................................................... 14
1. FCC PART 15 Class A Notice ...................................................................................................................... 15
3. Usage limitation ................................................................................................................................................... 16
4. Environment ........................................................................................................................................................... 16
5. Inspection ............................................................................................................................................................... 17
6. Storage ..................................................................................................................................................................... 17
7. Disposal ................................................................................................................................................................... 17
Setup ............................................................................... 18
1. What is Setup? ...................................................................................................................................................... 19
2. Step 1 Preparation ............................................................................................................................................... 20
1. Configuration image .................................................................................................................................... 20
2. Items to be prepared ................................................................................................................................... 20
3. Product Nomenclature................................................................................................................................ 21
3. Step 2 Setting Up the Hardware .................................................................................................................... 23
1. Attaching the FG............................................................................................................................................ 23
4. Step 3 Installing the Expansion Card ........................................................................................................... 24
5. Step 4 Connecting the Connection Cable .................................................................................................. 26
1. Connecting the Connection Cable to the Expansion Adapter .................................................... 26
2. Connecting the Connection Cable to the Expansion Chassis ...................................................... 26
3. Connecting the Power Supply.................................................................................................................. 27
4. Turning off the Power Supply .................................................................................................................. 28
6. Step 5 Installing the Expansion Adapter Card .......................................................................................... 29
7. Step 6 Setting Up and Checking .................................................................................................................... 30
1. Starting the System ...................................................................................................................................... 30
8. Setup Troubleshooting ...................................................................................................................................... 32
1. Symptoms and Actions ............................................................................................................................... 32
3
Table of Contents
Connection and Installation .......................................... 33
1. Installation Method ............................................................................................................................................. 34
1. Desktop Installation ..................................................................................................................................... 34
2. Mounting on a DIN Rail .............................................................................................................................. 35
3. Installation Conditions ................................................................................................................................ 37
Appendix ........................................................................ 38
1. Hardware Specification ..................................................................................................................................... 39
2. Physical Dimensions ........................................................................................................................................... 41
Customer Support and Inquiry ..................................... 42
1. Services .................................................................................................................................................................... 43
4
Introduction
This section provides necessary information of the product
such as the outline, bundled items and manuals before
actual use.
Introduction
ECH-PCI-DE-H4D Reference Manual
5
1. Related Manuals
The manuals related to the product are listed below.
Read them as necessary along with this document.
Must Read the Following Manuals.
Name
Purpose
Contents
How to get
Setup Guide
Must read this after
opening the package.
This lists the product
configuration and describes
the precautions.
Included in the package
(Printed matter)
Reference Manual
(This Document)
Read this when
operating the product.
This describes the hardware
aspects such as functions
and settings.
Download Manuals
Download the manuals accordingly from the following URL.
Download
https://www.contec.com/download/
Introduction
ECH-PCI-DE-H4D Reference Manual
6
2. About the Product
This product is an expansion chassis that adds PCI bus slots to a PC. Connecting an optional
expansion adaptor (EAD-DE-LPE) can add PCI bus slots onto the PC.
Installable card is a short-type PCI card (176.5(L) x 107(H) mm).
It is easy to install the product within the panel or device using DIN rail mounting jigs.
Introduction
ECH-PCI-DE-H4D Reference Manual
7
3. Features
PCI bus (5V/32bit 33MHz) slots can be added to your
PC.
Four PCI bus (5V/32bit 33MHz) slots can be added to your PC.
This expansion chassis is connected to a PC using an optional expansion adapter.
Short-type PCI bus cards can be connected.
You can connect up to four short-type [176.5 (L) x 107 (H) mm] PCI bus cards.
The product can install within the panel or the device
DIN rail mounting mechanism is equipped as standard with the product, making it easy to install the product within the panel or the
device.
Steel chassis with cooling fan
Steel chassis with cooling fan suitable for use in fields.
A wide range of power supplies (10.8 - 31.2VDC)
supported
As the product supports a wide range of power supplies (10.8 - 31.2VDC), the chassis can be used in a variety of power environments.
Introduction
ECH-PCI-DE-H4D Reference Manual
8
4. Product Configuration List
The product consists of the items listed below.
Check, with the following list, that your package is complete.
If you discover damaged or missing items, contact your retailer.
Product…1
Setup Guide…1
Warranty Certificate…1
Serial Number Label…1
Rubber Feet…4
Rubber Feet Fixed
Screw…4
Slot Cover…3
Standard Size Bracket…1
Power Connector…1
Contact…4
CAUTION
For operating this product, power supply (12 - 24VDC) is required separately.
For more details on the power supply, refer to “DC Power Input Connector: DC-IN (page22)”.
Introduction
ECH-PCI-DE-H4D Reference Manual
9
5. Expansion Adapter (Optional product)
Expansion Adapter for PCI Express Slot : EAD-DE-LPE
Check the CONTEC’s Web site for more information on the expansion adapter.
Website
https://www.contec.com/
Introduction
ECH-PCI-DE-H4D Reference Manual
10
6. Combinations of Expansion Adapters
and Expansion Chassis
The expansion adapters and expansion chassis can be used in the following combinations:
Expansion
adapter
Expansion chassis
ECH-PCI-DE
Expansion
chassis
ECH-PE-DE
-H2B
-F2B
-H4B
-F4B
-H4D
-H13A
-H2B
EAD-DE-LPE
*1
*1 The ECH-PCI-DE-H4D has no linkage function with the PC power-ON/OFF.
Expansion Chassis
ECH-PCI-DE-H2B
ECH-PCI-DE-F2B
ECH-PCI-DE-H4B
ECH-PCI-DE-F4B
ECH-PE-DE-H2B
ECH-PCI-DE-H4D
ECH-PCI-DE-H13A
Expansion Adapter
EAD-DE-LPE
Introduction
ECH-PCI-DE-H4D Reference Manual
11
7. Restrictions
This product is used in a combination with the optional expansion adapter. The following restrictions
apply to the situation when the expansion adapter is connected to the expansion chassis.
This product has restrictions on the types of PCs and cards that can be used.
Be sure to check the following restrictions before use.
< Restrictions of PC>
This product use the PCI-to-PCI Bridge to extend the bus.
The PCI cards plugged in PCI slots in this product are recognized if the PCI-to-PCI bridge is
recognized by the BIOS in the PC used. Ask the PC vendor for whether the BIOS recognizes the PCI-
to-PCI bridge.
< Restrictions on transfer rate >
When the expansion chassis accommodates a card that performs high-speed transfer such as bus
mastering, the overall transfer rate may be lower than that of PCI bus slots in the main unit of a
desktop PC.
This is caused by bus extension by the PCI-to-PCI Bridge.
The transfer rate may vary with the system configuration and the type of the PC.
< Restrictions of PCI card>
None of the following types of cards can be used in any expansion slot in the expansion chassis of
PCI bus.
Video display card (VGA card)
Card to connect a PCI bus expansion chassis
Card explicitly stated not to be used with the PCI-to-PCI Bridge
12
Safety Precautions
Understand the following definitions and precautions to
use the product safely.
Never fail to read them before using the product.
Safety Precautions
ECH-PCI-DE-H4D Reference Manual
13
1. Safety Information
This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
Signal word used to indicate a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION
Signal word used to indicate a potentially hazardous situation which, if
not avoided, could result in minor or moderate injury.
Safety Precautions
ECH-PCI-DE-H4D Reference Manual
14
2. Handling Precautions
DANGER
Do not use the product in locations exposed to a flammable or corrosive gas. It may cause
explosion, fire, electrical shock, or malfunction.
CAUTION
Do not connect this product to anything other than the optional expansion adapter. Also, use
only the connection cable that came with the expansion adapter.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.
Do not plug or unplug any card into or from an expansion slot with the PC or this product
powered. Doing so may result in a malfunction, overheating, or fault.
Be sure to turn off the PC or this product and unplug their power cables before plugging or
unplugging any expansion card.
Do not install this product to the expansion slot and do not plug or unplug the cables which
are connected to this product while the PC or expansion chassis is still turned on. Otherwise,
this product may malfunction, overheat, or cause a failure. Be sure that the personal computer
power is turned off.
Do not turn on or off the power switch of this product with the PC powered. Doing so may
result in a malfunction.
The total current consumption by the cards installed in the expansion slots in this product
must not exceed the maximum power capacity of its power supply.
Failure to supply ample power to expansion cards could result in a malfunction, overheating,
or fault.
The external supply voltage or drive current must not exceed the rating.
If a specific expansion slot is recommended for a card, plug the card into that slot. Failure to
do so may result in a malfunction, overheating, fault, or damage.
When plugging or unplugging the power cable, be sure to hold it by the plug itself.
The chassis has ventilating slits to prevent it from overheating. Avoid using the chassis with
the ventilating slits blocked or in an ill-ventilated place.
It is very dangerous to use the chassis with water, liquid, or metal (conductive) chips left
inside. Be careful not to let such foreign matters in the chassis.
Do not strike or bend this product. Otherwise, this product may malfunction, overheat, cause
a failure or breakage.
This product contains precision electronic elements and must not be used in locations subject
to physical shock or strong vibration. Otherwise, this product may malfunction, overheat,
cause a failure or breakage.
Safety Precautions
ECH-PCI-DE-H4D Reference Manual
15
Do not use or store this product in high temperature or low temperature surroundings, or do
not expose it to extreme temperature changes. Otherwise, this product may malfunction,
overheat, cause a failure or breakage.
Do not use or store this device where it is exposed to direct sunlight or near stoves or other
sources of heat. Otherwise, this product may malfunction, overheat, cause a failure or
breakage.
Do not use the product in the vicinity of devices that generate strong magnetic force or noise.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.
Do not touch this product's metal plated terminals (edge connector) with your hands.
Otherwise, this product may malfunction, overheat, or cause a failure. If the terminals are
touched by someone's hands, clean the terminals with industrial alcohol.
As this product contains components that are designed to operate at high temperature,
please do not touch this product when it is in use.
Do not touch the external connector when the power is on. Otherwise this may malfunction,
cause a failure due to static electricity.
The specifications of this product are subject to change without notice for enhancement and
quality improvement. Even when using the product continuously, be sure to read the manual
and understand the contents.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
When disposing of the product, follow the disposal procedures stipulated under the relevant
laws and municipal ordinances.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(Including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
1. FCC PART 15 Class A Notice
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Safety Precautions
ECH-PCI-DE-H4D Reference Manual
16
3. Usage limitation
This product has not been developed or manufactured to be used in systems including the
equipment which is directly related to human lives *1 or the equipment which in-volves human safety
and may significantly affect the maintenance of public functions *2. Therefore, do not use the product
for such purposes. Use outside The U.S. may conflict with radio laws and regulations of the country
concerned. Please do not use outside The U.S.
*1 Medical devices such as life-support equipment and devices used in an operating theater.
*2 Main control systems at nuclear power stations, safety maintenance systems at nuclear facilities,
other important safety-related systems, operation control systems within group transport
systems, air-traffic control systems, etc.
4. Environment
Use this product in the following environment. If used in an unauthorized environment, this product may overheat,
malfunction, or cause a failure.
Operating temperature
0 - 50ºC
Humidity
20 - 80%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive
Safety Precautions
ECH-PCI-DE-H4D Reference Manual
17
5. Inspection
Inspect the product periodically as follows to use it safely.
6. Storage
When storing this product, keep it in its original packing form.
Put this product in the storage bag.
Wrap it in the packing material, and then put it in the box.
Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
7. Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws
and municipal ordinances.
18
Setup
This section explains how to set up this product.
Refer to the Reference Manual of expansion adapter as
required.
Setup
ECH-PCI-DE-H4D Reference Manual
19
1. What is Setup?
Setup means a series of steps to take before the product can be used.
Taking the following steps in this section sets up the product.
Step 1 Preparation (page20)
Step 2 Setting Up the Hardware (page23)
Step 3 Installing the Expansion Card (page24)
Step 4 Connecting the Connection Cable (page26)
Step 5 Installing the Expansion Adapter Card (page29)
Step 6 Setting Up and Checking (page30)
If setup fails to be performed properly, see the Setup Troubleshooting (page32)section at the
end of this section.
Setup
ECH-PCI-DE-H4D Reference Manual
20
2. Step 1 Preparation
1. Configuration image
2. Items to be prepared
PC
Expansion adapter
Expansion adapter card…(a)
Connection cable…(b)
Expansion chassis
Chassis…(c)
Power cable
Expansion card to be installed (PCI bus-compliant card)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Contec ECH-PCI-DE-H4D Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI