2. Global Direct
  3. 21950

Global Direct 21950 Installation guide

  • Hello, I have reviewed the assembly instructions for the lamp 21950. This document details the steps required to assemble your new lamp, including instructions for attaching the glass shade, rods, and canopy. I'm ready to answer any questions you may have regarding the assembly process.
  • What is the first step in assembling the lamp?
    What should you check before starting the installation?
    How do you secure the glass shade onto the socket?
STYLE# 21950
Careful unpack all lamp parts from the carton.
1.Take the lamp carefully out of the Carton,
and place it on a flat surface.
2. Be sure the power to the installation point is power off.
3.Place the Glass Shade onto the Socket. Secure by threading
the Socket Collar onto the Socket. Hand tighten until snug.
4.Thread the Rods onto the Coupling on the top of
Glass Assembly until snug.
5.Place the Ceiling Canopy over the Mounting Screws
and thread Mounting Balls onto the Mounting Screws
to secure it , Hand tighten until sung.
6.Install bulbs (not included).See label located at socket
area for type and maximum allowed wattage.
ASSEMBLY INSTRUCTIONS
/