2. Frame It All
  3. CFK-WGT

Frame It All CFK-WGT Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Frame It All CFK-WGT Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manufactured and Distributed by
Scenery Solutions, Inc., 222 Grace Church Street, Suite 302
Port Chester, NY 10573
Questions call: 800-914-9835 admin@frameitall.com
©2009 Frameitall All rights reserved
Cur ved Front
Planter
The Curved Front Planter Kit contains:
•5StraightCompositeTimbers
 each44.5”long
•1CurvedCompositeTimber44.5”long
•10StackingJoints(5twopacks)each
 containingtwolongStakes,four
 Brackets,twocapsandscrews.
•4FinishingSleeves.
Introducing the ‘Frame-It-All’ Curved Front Garden
Forgeneralassemblyyoucanndtheinstructionsinthe2PackofFrame-it-alljoints.
ECO-friendly
TheframeworkutilizesourCompositePlasticTimbers.Manufacturedfrom40%woodberand60%recycledpolyethylene,
theEco-friendlydurablecompositewoodgrainplastictimbersneverrot,warporsplinter.Thecuttosizetimbersconnectto
bracketswithourpatentedStackingJointsstakes.
Dimensions:
2’x4’
Installation Notes:
BeforestartingtoassembletheCurvedFrontGarden,refertothepartsdiagramtounderstandhowtoscrewthebracketsonto
thetimbers.RemovertheStackingjointsfromtheplasticbagsandlayouttheparts.Eachofthejointscomprisesastakecup
andtwobracketsplusscrewsneeded.
Tools Needed:
•Phillipsheadscrewdriver
 (electricalorbatteryoperatedpreferred)
•Hammer
Screw bracket onto
composite timber
Two screws are
required per bracket
(1 on each side).
Use a Finishing
Cap to complete
the top level.
Use an Anchor
or Stacking Joint
for ground level
frames or borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fit into
the tops of Anchor
Joints and other
Stacking
Joints
Diagram 2 Parts Identification
How the Joints Work
Parallel bracketed
Stacking Joint
Curved timber
P
P
Assembly Instructions
1)TaketwoofthestraightTimbersandcarefullyusingasetsquaredrawastraightlinedownthecenterofeachtimber(approx
22
1/4”)todividetheirlengthintotwoequalhalves.CarefullysaweachTimberintotwohalveswithahandsaworpowersaw.
2)Withascrewdriver,(apowerdriverwouldbehelpful)attachonebrackettoeachendofeachoftheCompositeTimbersas
shownindiagram(2)onthepreviouspage.
3)LayoutthebaselevelofthePlanterina
rectangularshape,withthecurvedtimber
facingfrontandinsertoneStakethroughthe
bracketsandintoeachofthefourcornersto
lockallsidesinplace.
4)AddthesecondlevelofthePlanterand
insertoneStakethroughthebracketsinto
theapertureonthetopofthestakebeneath
ittolockthesecondlevelinplace.Usetwo
oftheFinishingSleevesinsteadofbrackets
fortheupperlevelfrontcornersasshownin
diagram(3)
5)AddtheremainingTimbertotherear
wallofthePlanter,usingtwooftheFinish-
ingSleevesandlocatethelasttwoStakes
throughthebracketsintotheapertureonthe
topofthestakebeneath.
6)AddtheCapstoeachofthefourtopcor-
nerjointstonishoffthePlanter.Youcanalso
locateSolarLights(#SL-1025,soldsepa-
rately)asanaddedbeautyfeature.
Trim stake spike
with hacksaw
for use on hard
surfaces
Note:
If you plan to assemble the Kit for use on a hard surface, open two
packs of the Stacking Joints, remove the four stakes and with a
hacksaw, carefully cut the spike of each stake where indicated on
the diagram. Use these four cut down stakes for the four corners of
the base level of the planter.
Do not do this if you are locating the Planter outdoors on soil.
/