A UTC Fire & Security Company
This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes
no responsibility for the product’s suitability for a particular application. The product must be
properly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.
Kidde Fire Systems
A UTC Fire & Security Company
400 Main Street
Ashland, MA 01721
Ph: 508.881.2000
Fax: 508.881.8920
www.kiddefiresystems.com
K-87-016 Rev AB © 2007 Kidde-Fenwal Inc. Printed in USA
Effective: May 2007
K-87-016
°
Wet Chemical
Mechanical, Remote Manual Release
P/N: 875572
DESCRIPTION
The Mechanical, Remote Manual Release is provided as
a means of manually actuating the system from a remote
location. The Mechanical, Remote Manual Release is
used only with the Mechanical or Electric Control Heads
and cannot be used with the KRS-50 Control Box. The
Mechanical, Remote Manual Release is attached to the
primary control head with 1/16-inch cable. To actuate the
system at the Mechanical, Remote Manual Release, pull
out the ring pin and pull hard on the handle.
Each manual release is supplied with a separate name-
plate. This nameplate must be attached to the mounting
surface 1-inch above or below the pull station.
A second manual release may be installed with the use
of the Tee Pulley Kidde
®
P/N 843791.
