Panasonic Arbitrator 360 Installation guide

Arbitrator 360
Panasonic
Brand
Panasonic
Model
Arbitrator 360
Type
Installation guide

Panasonic Arbitrator 360 is an advanced video surveillance solution designed to provide comprehensive security monitoring and management. With its powerful features and capabilities, it offers users an exceptional level of control and visibility over their surveillance systems. Here are some of the key features and use cases of Panasonic Arbitrator 360:

  • Centralized Monitoring: Arbitrator 360 allows users to monitor multiple cameras and video feeds from a single, centralized location. This enables efficient surveillance and quick response to security incidents.

  • Remote Access: With Arbitrator 360's remote access capabilities, users can securely access and control their surveillance system from anywhere with an internet connection.

Panasonic Arbitrator 360 is an advanced video surveillance solution designed to provide comprehensive security monitoring and management. With its powerful features and capabilities, it offers users an exceptional level of control and visibility over their surveillance systems. Here are some of the key features and use cases of Panasonic Arbitrator 360:

  • Centralized Monitoring: Arbitrator 360 allows users to monitor multiple cameras and video feeds from a single, centralized location. This enables efficient surveillance and quick response to security incidents.

  • Remote Access: With Arbitrator 360's remote access capabilities, users can securely access and control their surveillance system from anywhere with an internet connection.

Panasonic Arbitrator
SI Installation Manual
SI Version 1.9.0
Arbitrator-SI 1.9 InstallManual-Rev1.doc 2
Installing the Arbitrator SI 1.9.0
In order to simplify the installation process, the new
Arbitrator SI software will automatically install the
required software components during it’s installation.
If those components are already installed, the
application will skip those core required components
and move onto the software installation.
The following steps detail how to install and configure
the Arbitrator SI 1.9.0
1. Launch the Arbitrator SI 1.9.0 .exe from your
desktop.
2. An InstallShield Wizard will launch initiating the
install process, select “Next” to begin.
3. The next step in the installation process is defining
the destination of the install path. You can manually
change it by selecting the “Change” button, or you
can keep the default path. Select “Next” when
ready to proceed.
4. Once the destination has been set and the user has
moved to the next step you can begin the actual
installation by selecting “Install”. A status bar will
begin to display the state of the installation and the
progress it has made.
5. When the status bar has reached the end, a window
will pop up requiring the IP address of the recorder
unit the software is trying to interface with.
6. After the information has been entered into the IP
window, an InstallShield Wizard completion window
will appear. Select “Finish” to finalize the
installation.
7. A shortcut will be created on the desktop allowing
for quick software access.
Note: The IP address is configured to upload to any
CMS server transmitting a wireless beacon. To upload
video to one specific CMS server, input the IP address
of the desired CMS server.
Arbitrator-SI 1.9 InstallManual-Rev1.doc 3
Disclaimer
By providing this document, Insight Video Net, LLC,
makes no representations regarding the corrections
and completeness of its contents and reserves the
right to alter this document at any time without
notice. All marks referenced herein with R or TM
symbol are registered trademarks or trademarks of
Insight Video Net LLC or it’s subsidiaries. All rights
reserved. All other marks are trademarks of their
respective owners.
Copyright 2008 Insight Video Net, LLC.
Email: Support@InsightVideoNet.com
Phone: 909. 373.1800
Website: www.InsightVideoNet.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Panasonic Arbitrator 360 Installation guide

Arbitrator 360
Panasonic
Brand
Panasonic
Model
Arbitrator 360
Type
Installation guide

Panasonic Arbitrator 360 is an advanced video surveillance solution designed to provide comprehensive security monitoring and management. With its powerful features and capabilities, it offers users an exceptional level of control and visibility over their surveillance systems. Here are some of the key features and use cases of Panasonic Arbitrator 360:

  • Centralized Monitoring: Arbitrator 360 allows users to monitor multiple cameras and video feeds from a single, centralized location. This enables efficient surveillance and quick response to security incidents.

  • Remote Access: With Arbitrator 360's remote access capabilities, users can securely access and control their surveillance system from anywhere with an internet connection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents