Currys Essentials C11DECT10 User manual

INSTRUCTION MANUAL

CORDLESS PHONE

2 HANDSET

C11DECT10

C22DECT10

Currys Essentials C11DECT10_A6_100513.indd 1 5/13/10 2:06 PM

UNPACKING �� 5

GETTING STARTED�� 7

Location �� 7

Talk / Standby Time �� 7

Battery Low Warning �� 8

Battery Performance �� 8

Handset Range �� 8

Signal Strength�� 8

INSTALLATION YOUR PHONE �� 9

Connecting the Base Unit �� 9

Installing and Charging the Batteries�� 9

Handling the Batteries ��10

GETTING TO KNOW YOUR PHONE �� 12

Handset Buttons ��12

Handset Display Icons ��12

OPERATION �� 13

Outgoing Calls �� 13

Making a Phone Call ��13

Call Setup with Dial Preparation ��13

Redial the Last Number Dialed - In Standby Mode ��13

Storing Redial Number to Memory ��14

Incoming Calls ��14

Ativate / Deactivate Hands-free Function ��14

Programming a Memory Number �� 15

Calling a Memory Number �� 15

Mute Function ��15

Setting the Volume �� 16

Setting the Pause��16

Flash �� 16

CONTENT

Currys Essentials C11DECT10_A6_100513.indd 2 5/13/10 2:06 PM

Setting the Flash time ��16

Setting the Ringer Volume and Melody ��17

Handset Melody ��17

Handset Ring Volume ��17

Keypad Lock ��18

CALL-ID FUNCTION (CLIP)�� 19

New Calls ��19

Consulting the Call List ��19

Calling a Number from the Call List ��20

Erasing a Number from the Call List ��20

Store a Number from the Call Log into the Phonebook Memory

��20

Add New Records to Phonebook Memory ��21

Review / Edit / Dial Stored Phonebook Records ��22

REGISTER / DE-REGISTER A HANDSET �� 23

Register Handset to Base ��23

De-Register Handset from Base��24

CALL TRANSFER & INTERCOM BETWEEN 2 HANDSETS �� 25

Call Transfer and Conference Call during an External Call ��25

Interal Call (Intercom) ��26

SPECIFICATION �� 27

SAFETY FIRST �� 28

CAUTION�� 30

Installation��30

Currys Essentials C11DECT10_A6_100513.indd 3 5/13/10 2:06 PM

Congratulations on the purchase of

your new Curry Essentials Cordless

Phone� We recommend that you spend

some time to read this Instruction

Manual in order to fully understand how

to install and operate it�

Read all the safety instructions carefully

before use and keep this instruction

manual for future reference�

Currys Essentials C11DECT10_A6_100513.indd 4 5/13/10 2:06 PM

GB-5

Before UseOperationSpecificationSafety WarningsCaution

Base Unit x 1

PN: 810+71001-82600-00

AAA Batteries x 2

PN: GP45AAAHC

Instruction manual x 1

PN: 703+07100-00100-00

Cordless Telephone x 1

PN: 800+71001-82600-00

Mains Adaptor x 1

PN: 5E-AD060050B

Telephone Line Cord x 1

PN: 108+05182-00000-00

UNPACKING

Remove all packaging from the unit� Retain the packaging�

If you dispose of it please do so according to local

regulations�

The following items are included:

INSTRUCTION MANUAL

CORDLESS PHONE

2 HANDSET

C11DECT10

C22DECT10

Currys Essentials C11DECT10_A6_100513.indd 5 5/13/10 2:06 PM

GB-6

Before Use Operation

Specification Safety Warnings Caution

(for C22DECT10 only)

If items are missing, or damaged please contact

Partmaster (UK only). Tel: 0870 6001 338 for assistance.

Charging Cradle x 1

PN: 880+71002-82600-00

Cordless Telephone x 1

PN: 800+71002-82600-00

AAA Batteries x 2

PN: GP45AAAHC

Currys Essentials C11DECT10_A6_100513.indd 6 5/13/10 2:06 PM

GB-7

Before UseOperationSpecificationSafety WarningsCaution

GETTING STARTED

Location

You need to place the base unit within 1�8 metres of the

mains power socket and telephone socket so that the

cables will reach�

Make sure it is at least 1 metre away from other electrical

appliances to avoid interference�

Your telephone works by sending radio signals between

the handset and the base unit� The strength of the signal

depends on where you site the base unit� Putting it as

high as possible can help to provide the best signal�

Talk / Standby Time

Under ideal conditions, the handset batteries should

give about 10 hours of talk time or 100 hours of standby

time on a single charge� (This does not mean you can

unplug the base or leave it for this length of time without

charging)�

Please note that new NiMH rechargeable batteries do not

reach full capacity until they have been in normal use for

several days�

Do not connect the telephone line cord to the telephone

line wall socket until the handset is fully charged and

only use the telephone line cord provided.

The base unit should be plugged into the mains power

socket at all times.

Currys Essentials C11DECT10_A6_100513.indd 7 5/13/10 2:06 PM

GB-8

Before Use Operation

Specification Safety Warnings Caution

Battery Low Warning

If the icon is ashing in the display and you hear a

warning beep every minute during a call, you will need to

recharge your handset before you can use it again�

Battery Performance

To keep the batteries in the best condition, leave the

handset o the base unit for a few hours at a time�

Running the batteries right down at least once a week will

help them last as long as possible�

After charging your handset for the rst time, subsequent

charging time for the batteries is approximately 6–8 hours�

The charge capacity of rechargeable batteries will reduce

with time as they wear out, thus reducing the talk/standby

time� Eventually they will need replacing�

Handset Range

The product has a range of up to 300 metres outdoors

when there is a clear line of sight between the base unit

and the handset� Any obstruction between the base unit

and the handset will reduce the range signicantly� With

the base unit indoors and the handset either indoors or

outdoors, the range will normally be up to 50 metres�

Thick stone walls can severely aect the range�

Signal Strength

The icon on your handset display indicates when you

are in range of the base unit� When it ashes and you hear

a warning beep, you are out of range and will need to

move closer to the base unit�

Currys Essentials C11DECT10_A6_100513.indd 8 5/13/10 2:06 PM

GB-9

Before UseOperationSpecificationSafety WarningsCaution

INSTALLING YOUR PHONE

Connecting the Base Unit

1� Plug the mains adaptor cable & telephone line cable

into the base unit�

2� Then plug the mains adaptor and telephone line cable

into their wall sockets�

3� Always use the cables provided in the box�

Installing and Charging the Batteries

1� Slide open the battery

compartment cover�

2� Place the two

batteries as indicated�

Follow the polarity

indicated on the

handset�

3� Slide the battery

compartment cover

back on�

Currys Essentials C11DECT10_A6_100513.indd 9 5/13/10 2:06 PM

GB-10

Before Use Operation

Specification Safety Warnings Caution

4� Put the handset on the base unit

to charge� Charge for 14 hours

the rst time you charge� A

beep indicates that the handset

is properly placed on the base

unit�

Use only base unit provided.

Use only NiMH rechargeable batteries.

Handling the Batteries

• Improper or incorrect use of batteries may cause

corrosion or battery leakage, which could cause

personal injury or damage to property�

• Install the batteries correctly by following the polarity

(+ and -) indications in the battery compartment�

• Use only the types of the batteries which are indicated

in this manual�

• Do not install new batteries with used ones and do not

mix dierent types of batteries�

• Do not dispose of the used batteries as domestic waste�

Dispose of them in accordance with local regulations�

Currys Essentials C11DECT10_A6_100513.indd 10 5/13/10 2:06 PM

GB-11

Before UseOperationSpecificationSafety WarningsCaution

Place charging cradle within

reach of a mains power wall

socket�

1� Plug the charging cradle into

the mains power wall socket�

2� Insert the 2 x AAA

rechargeable batteries

supplied, taking note of the

‘+’ and ‘-’ markings inside

the battery compartment,

then slide the battery

compartment shut�

3� Place the handset on the

charger� You should let the

batteries charge continuously

for at least 14 hours�

The display will show the time and the handset number, e.g.

2, to show it is registered to the base unit.

Your phone is now set up to make and receive calls.

Only use ShenZhen G.Credit Electronics Co., Ltd (5ESP) power

adaptor model number 5E-AD060050B for base unit.

Only use ShenZhen G.Credit Electronics Co., Ltd (5ESP) power

adaptor model number 5E-AD070042B for charging cradle.

Only use the GP rechargeable batteries GP4AAAHC.

(for C22DECT10 only)

Currys Essentials C11DECT10_A6_100513.indd 11 5/13/10 2:06 PM

GB-12

Before Use Operation

Specification Safety Warnings Caution

GETTING TO KNOW YOUR PHONE

1 TALK ON / OFF

2 LEFT / FLASH

3 CALLER ID /

RIGHT

4 PHONE BOOK

5 SPEAKER

6 INTERNAL CALL

7 MUTE / DELETE

8 RINGER ON /

OFF

9 KEYPAD LOCK

10 RECEIVER VOL /

RINGER TONE /

RINGER VOL

11 LNR / PAUSE /

FLASH LONG

SHORT

Handset

Display

1

3

6

7

9

11

2

4

5

8

10

Currys Essentials C11DECT10_A6_100513.indd 12 5/13/10 2:06 PM

GB-13

Before UseOperationSpecificationSafety WarningsCaution

OPERATION

Outgoing Calls

Making a Phone Call

1� Press the button� You will hear the dial tone�

2� Enter the desired telephone number�

3� Press the button again when you want to terminate

the call�

Call Setup with Dial Preparation

1� Enter the desired telephone number� An incorrect

number can be corrected by means of the button�

When you haven’t pressed a button for 10 seconds, the

number you’ve already entered will disappear and the

handset will return to standby mode�

2� Press the button� The number will be dialed

automatically�

3� Press the button again when you want to terminate

the call�

Redial the Last number Dialed – In Standby Mode

1� Press the button� The number you last called

appears on the display� If you would like to dial one of

the last 3 numbers dialed, press the or button

to select the desired number that appears on the

display� Press the button, the number shown on the

display is dialed automatically� After nishing your call,

press the button again to hang up�

Currys Essentials C11DECT10_A6_100513.indd 13 5/13/10 2:06 PM

GB-14

Before Use Operation

Specification Safety Warnings Caution

Remark: button can be used as the or

button to toggle the last 3 numbers dialed.

Storing Redial Number to Memory

1� Select your favour redial number that you want to store

2� Press and hold the button for 2 seconds

3� The space after the last digit of the redial number will

ash, and you can then edit the redial number�

4� After editing the redial number, press the button

again�

5� Enter the memory location (00 to 19) where you want

to store the number

6� Press the button again to conrm and to go back to

standby mode�

Incoming Calls

When a call comes in, the handset will start to ring� Press

the button to answer the incoming call�

Activate / Deactivate Hands-free Function

This function allows you to communicate without having

to pick up the handset� When you are on the phone, press

the button to activate the hands-free function� Press

the same button to deactivate the hands-free function�

Currys Essentials C11DECT10_A6_100513.indd 14 5/13/10 2:06 PM

GB-15

Before UseOperationSpecificationSafety WarningsCaution

Programming a Memory Number

You can program 20 indirect numbers (of max� 24 digits) in

the phone’s memory�

1� Press and hold the button until the icon ashes

on the display�

2� Enter the telephone number you wish to store�

3� Press the button again to conrm�

4� Enter the memory location (00 to 19) where you want

to store the number�

5� You will hear a conrmation tone and the icon will

disappear�

Calling a Memory Number

1� Press the button, followed by the number of the

memory location (00 to 19)�

2� Press the button� The memory number will be

dialed automatically�

3� Press the button again when you want to terminate

the call�

Mute Function

It is possible to deactivate the microphone during a

conversation� Now you can speak openly without being

heard by your caller�

1� Press the button during a conversation� The

Currys Essentials C11DECT10_A6_100513.indd 15 5/13/10 2:06 PM

GB-16

Before Use Operation

Specification Safety Warnings Caution

microphone will be deactivated� The icon appears on

the display� Press the button again when you want

to continue the conversation�

Setting the Volume

1� During a conversation you can set the volume by

pressing the button�

2� You can set the volume between and using

the button�

3� When you are calling in Handsfree mode and you want

to change the volume, press the button�

Setting the Pause

1� If you wish to insert a pause, press the button on

the location where you want a pause of 3 seconds�

Flash

When you press the button, also called ash or recall,

the unit generates a line interruption� It gives you the

possibility to use the special services of your telephone

provider and/or to transfer calls when you have a

telephone exchange�

Setting the Flash Time

1� Press and hold the button for 3 seconds�

Currys Essentials C11DECT10_A6_100513.indd 16 5/13/10 2:06 PM

GB-17

Before UseOperationSpecificationSafety WarningsCaution

2� The display will show: [S] or [L]�

3� The ash time setting will disappear after 2 seconds

from the display�

Setting the Ringer Volume and Melody

Handset Melody

1� Press and hold the button until the current

melody is heard�

2� Select the desired melody (1 to 9) by pressing the

and buttons�

3� Press the button again to conrm the setting�

Handset Ring Volume

1� Press the button in standby mode�

2� The handset will ring in the current volume�

3� Use the and buttons to select the desired

volume�

4� Press the button to turn the volume o and the

icon will be displayed�

NOTE: The Handsfree receiver volume is also

adjustable as described above!

You can turn the ringer volume of each individual

handset ON or OFF by simply pressing and holding

down the button while in standby mode. The

handset unit will never ring!

Currys Essentials C11DECT10_A6_100513.indd 17 5/13/10 2:06 PM

GB-18

Before Use Operation

Specification Safety Warnings Caution

Keypad Lock

When the keypad is locked, pressing any key will have no

eect during standby (except holding down the

button)�

1� Press and hold the button� The icon appears on

the display and the keypad is locked�

2� Press and hold the button again to un-lock the

keypad�

3� When there is an incoming call, you can still answer the

call by pressing the button�

4� During the call, the keypad functions as normal� When

the call has ended, the keypad will be locked again�

Currys Essentials C11DECT10_A6_100513.indd 18 5/13/10 2:06 PM

GB-19

Before UseOperationSpecificationSafety WarningsCaution

CALLER-ID FUNCTION (CLIP)

The phone displays the telephone numbers of incoming

calls� This function is only possible if you are subscribed to

a telephone operator that provides this service� Contact

your telephone provider for more information� When you

receive a call, the numbers are saved in a call list� This list

can hold 20 telephone numbers (each with a maximun of

23 digits)� If the number is longer than 12 digits, you can

press the button to show the other digits�

New Calls

When you’re received a new unanswered call, the icon

will ash on the display�

Consulting the Call List

1� Press the button� The last received call is shown on

the display�

2� If the list is empty, [NO] is shown on the display�

3� The following will be shown on the display:

4� Press the button to view the date and time of the

Caller ID�

12345678

Currys Essentials C11DECT10_A6_100513.indd 19 5/13/10 2:06 PM

GB-20

Before Use Operation

Specification Safety Warnings Caution

5� You can delete the Call List by pressing the button�

NOTE: On some networks with Caller ID, time and

date will not be displayed.

Calling a Number from the Call List

1� Press the button and then press the and

buttons to scroll through the Call List until the desired

number is shown on the display�

2� Press the button� The number will be dialed

automatically�

Erasing a Number from the Call List

1� Press the button and then press the and

buttons to scroll through the Call List until the desired

number is shown on the display�

2� Press and hold the button for 3 seconds to erase the

number�

3�

Store a Number from the Call Log into the

Phonebook Memory

Press the button and then press the and

buttons to scroll through the Call List until the desired

number is shown on the display�

Press and hold the button for 2 seconds�

The space after the last digit of the Caller ID will ash, and

you can then edit the Caller ID number�

Currys Essentials C11DECT10_A6_100513.indd 20 5/13/10 2:06 PM

Page is loading ...

Currys Essentials C11DECT10 User manual

Currys Essentials C11DECT10 User manual

Related papers

Other documents