Oricom pro800 DECT User manual

Oricom
Brand
Oricom
Model
pro800 DECT
Category
Telephones
Type
User manual

This manual is also suitable for

Professional Series
User Guide
Pro800 DECT Digital Cordless Telephone
with Answering System
Pro600 DECT Digital Cordless Telephone
Keep this user guide for future reference.
Pro_600_800.indd 3 2008-11-11 16:17:29
TABLE OF CONTENTS
Warnings and Safety Information ......................................................................................................1
Getting Started .................................................................................................................................2
Operating the Telephone ...................................................................................................................6
Telephone .........................................................................................................................................8
Using the menu ..............................................................................................................................12
Phone Book ....................................................................................................................................19
Caller ID ..........................................................................................................................................21
Using the Answering Machine (Pro800 Only) ...................................................................................23
Using Remote Access (Pro800 Only) ................................................................................................26
Advanced Setting ............................................................................................................................28
Troubleshooting ..............................................................................................................................30
Default settings ..............................................................................................................................31
Technical Properties........................................................................................................................32
Maintenance/Guarantee ..................................................................................................................33
Index ..............................................................................................................................................34
Pro_600_800.indd 4 2008-11-11 16:17:29
1
Warnings and Safety Information
• Thistelephone complies with applicable safety requirementsfor
exposure to radio waves (EMR). The mean power of this telephone
doesnotexceed20mWlimitatwhichpointtestingisrequired.
• Theearpieceofthehandsetmayattractsmallmetalobjectssuchas
staplesandpins.Careshouldbetakenwhenplacingthehandsetnear
these items.
• Thistelephoneisnotdesignedformakingemergencytelephonecalls
whenthemainspowerfails.Alwayshaveacordedphoneavailableto
beabletomakeandreceivecallstoemergencyservicesifthemains
power fails.
• Donotuseyourtelephoneduringanelectricalstormthunderstormas
itispossibletogetanelectricshock.Refertoinformationcontainedin
White pages directory.
• ThisphoneisdesignedforconnectiontoaPSTNtelephonelineoran
analogue extension port of a PBX system. If you connect this device to
a digital extension of a PBX, damage may result to the PBX.
Use only the mains adaptors supplied with this product. Incorrect
adaptor polarity or voltage can seriously damage the unit.
Adaptorforbaseunit:
Input:100~240VAC50/60Hz680mA
Output:12VDC670mA
Thistelephoneiscapableofproducingveryhighvolume
levels when the "Boost" is switched on and the volume
controlissettomaximum.Extremecautionshouldbetaken
ifthehandsetistobesharedbetweenuserswithnormal
hearing and those with hearing impairments.
!
CAUTION
IMPORTANT
• Personswithpacemakersshouldseekadvicefromtheirdoctorbefore
using this product.
• Avoidexposureofthistelephonetomoistureorliquid.
• Topreventelectricshock,donotopenthehandsetorbasecabinet.
• Avoidmetalliccontact(e.g.metalclips,keys)betweenthebattery
contacts and charging conductors.
• Thereisaslightchancethatthetelephonecouldbedamagedbyan
electrical storm. It is recommended that users unplug the phone from
themainssupplyandtelephonesocketduringastorm.
• Donotusethehandsetinanexplosivehazardareasuchaswhere
thereisgasleaking.
• Followthelocalregulationsregardingthedisposal of yourpacking
materials,exhaustedbatteriesandusedphone.Whereverpossible,
recycle those materials.
• Weadvisethatthisphoneshouldnotbeusednearintensivecaremedical
equipment.
• Cleanwitha dry,soft,lint-free cloth.Never use cleaning agents,
particularly aggressive solvents.
• Becausethe phoneworksby sendingradiosignalsbetween base
station and handset, wearers of hearing aids may experience
interference in the form of a humming noise. The telephone is
compatiblewithmostpopularhearingaidsonthemarket.However,
duetothewiderangeofhearingaidsavailable,thereisnoguarantee
thatthetelephonewillfunction"problemfree"witheverymodel.
•
Yourphonecaninterferewithelectricalequipmentsuchasansweringmachines,
TVandradios,clockradiosandcomputersifplacedtooclose.Itisrecommended
thatyoupositionthebaseunitatleastonemetrefromsuchappliances.
Pro_600_800.indd 1 2008-11-11 16:17:30
2
Getting Started
Installation and Charger
1. Connectthemainsadaptor(supplied)tothesocketon
thebackofthebaseunitandtothewallmainssupply.
2. Connectthetelephonecordtothephonesocketonthe
backofthebaseunitandintothewallphonesocket.
3. Insert 2 rechargeable Ni-MHAAA
1.2V800mAhbatteries(included),
observingthe correct polarity, into
the battery compartment on the
handset.Slidethebatterydoorrmlyintoplace.
4. Placethehandsetonthechargingcradleandchargethe
batteriesforafull15hoursbeforeusingitforthersttime.
Select your country
After the phone is fully charged you will need to select
your country. The phone will display Welcome. Press
[ ]. Scroll [ ] or [ ]toselectAustraliaorNew
Zealand. Press [ ]againtoconrm.
Note:
Itmaytakesometimeforthecordlesshandsettopowerup,
and it may get warm during initial charge. This is normal.
It is good practice to put the cordless handset on the charging
cradle when it is not in use to ensure that the handset is always
fully charged.
DO NOT USE STANDARD/ALKALINE BATTERIES INTHIS
PRODUCT,ASTHERE ISA RISK OFEXPLOSIONAND/OR
INJURY.USE ONLYNI-MHRECHARGEABLE BATTERIESAS
SPECIFIEDINTHIS USER GUIDE. CONTACT ORICOM FOR
REPLACEMENTBATTERIES.
RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN
INCORRECTTYPE.
Neverusenon-rechargeablebatteries.Use recommended
type supplied with this product.
•Neverusealkalineorlithiumbatteries.
•Do not dispose of thebatteries ina fire,asthey can
explode.
•Donotopenormutilatethebattery.Releasedelectrolyteis
corrosiveandcancausedamagetotheeyesorskin.Itcan
betoxicifswallowed.
•Avoid contact with metal objects when handling the
battery.Theseobjects couldshort outthe batteriesor
causetheconductortooverheatresultinginburns.
•Donotattempttorechargethebatterycellbyheatingit.
Suddenreleaseofbatteryelectrolytecancauseburnsor
irritationtotheeyesorskin.
•Observetheproperpolarity,ordirection,ofanybattery.
Reverseinsertionofthebatterycellcanresultinleakage
or explosion.
•Removethebatteriesifyoudonotplantousetheproduct
for several months at a time.
•Followthelocalregulationsregardingthedisposalofyour
packingmaterials,exhaustedbatteriesandusedphone.
Whereverpossible,recyclethosematerials.
WARNING
Pro_600_800.indd 2 2008-11-11 16:17:30
3
Getting Started
Pack contents
Depending on themodel you have purchased this pack
shouldcontainthefollowingitems:
If any of these are missing, please contact Oricom directly.
Pro600-1/Pro800-1 Pro600-2/Pro800-2
Base units 1 1
Cordless handsets 1 2
Charging cradle 0 1
Power adaptors 1 2
Modular adaptor plug 1 1
Line cord 1 1
User guide 1 1
Handset
Rechargeable AAA
Ni-MH Batteries (1.2V
800mAh)
2 4
Handset Battery cover 1 2
Important:
Do YoU HaVE BroaDBanD/aDSL?
Ifyoudo,youmustconnectaninlinelter(notsupplied)
betweenthetelephonesocket andyourPro600/800
basetoensurethatyourbroadbandandPro600/800
willworkproperly.Ifyoudonotinstallthelteryouwill
experienceinterferenceon the Pro600/800andyour
Broadbandmaysufferdropouts.Pleaserefertotheuser
guideoftheinlinelterforinstallation.
Purchasing additional handsets
YoumayexpandyourPro600/800byaddingmorehandsets
(PROHS).These can be purchased separately from the
reseller where you purchased the product, or directly from
Oricom(Australia).ThePro600/800canaccommodate a
totalof4cordlesshandsets.
Pro_600_800.indd 3 2008-11-11 16:17:30
4
Getting Started
Pro800
Pause (long press 0)
Microphone
Incoming call light
Memory1/Userprole1
30 dB Boost
Display
Menu/Mute/Delete
Internal call
Externalcall/Handsfree
*/Ringeron/off
IncomingCall/Charging/LineinUse
PINCode(underbase)
RingDelay(underbase)
Play/Pause/OK
Rewind
Fastforward/Memo
Delete
Volumedown
Volumeup
Date/Time
Answeron/off/Stop/AnswerMode
OGM
#/Keylock
Alphanumeric
keypad
End call
Down/Callslist
PhoneBook
Headsetsocket(Headsetnotincluded)
Recall
Up/Redial
Memory2/Userprole2
Volumeup/down&Equaliser
Pro_600_800.indd 4 2008-11-11 16:17:31
5
Getting Started
Pro600
Incoming call light
Volumeup/down&Equaliser
Memory2/Userprole2
Up/Redial
Headsetsocket(Headsetnotincluded)
PhoneBook
Recall
End call
Down/Callslist
#/Keylock
Findhandset
IncomingCall/Charging/LineinUse
Memory1/Userprole1
30 dB Boost
Display
Menu/Mute/Delete
Internal call
Externalcall/Handsfree
Alphanumerickeypad
*/Ringeron/off
Pause (long press 0)
Microphone
Pro_600_800.indd 5 2008-11-11 16:17:33
6
Operating the Telephone
Operating the Telephone
The instructions throughout this guide are forboth the
telephone baseandthecordlesshandset,unlessstated
otherwise.
Display and explanation of operation sequences.
Enter digits or letters
Pressthebuttonshown,briey
2 x Pressthebuttonshown,twicebriey
2 sec Pressthebuttonshownfor2seconds
Press and hold Pressandholdthebuttonshown
Release Releasebuttonshown
Handsetrings
Base station rings
Cordlesshandsetexternalcallbutton
Endacalland/orreturntostandbyon
the cordless handset
VOLUME1or Text or icon in the display
Icons in the handset display
Icon Description
PhoneBookmode
< There is previous page to view on the left
> There is next page to view on the right
Battery status
Ringer off
Keylockison
Handsfreemode
Call in progress
Boost receiver volume is on
Handsetmicrophoneismuted
You have new calls
When steady indicates that the handset is in range
ofthebase.Whenashingindicatesthatthe
handsetisoutofrangeofthebase.
Internal call in progress
Message waiting
Note:Indicatesamessagefromyournetwork
operatorsservice.Subscriptioncharges
and access fees may apply.
Pro_600_800.indd 6 2008-11-11 16:17:33
7
Operating the Telephone
Navigating in the menu
Allthehandsetfunctionscanbeaccessedviathe
menu.Pleasereferto"Usingthemenu"onpage12for
information on how to access each function.
All descriptions in this operating manual assume that
thehandsetisinStandbymode.
Open the main menu
or Selectthesubmenurequired
Openthesubmenu
or Selectthefunctionrequired
Open the function
or Selectthesettingrequired
Enterdigitsorlettersusingtherelevantkeys
orSave Conrmtheentries
Cancelandreturntostandbymode
Every process is automatically cancelled if there is no
input within 20 seconds. The handset will return to
standbymode.
Creating phone book entries - example
This example explains how to navigate and create
entriesinthephonebook.Proceedasinthisexamplefor
all the settings.
Openthephonebook
Option, Select"Newentry"
Save Enterthename(max.16letters)andconrmit
Save Enterthephonenumber(max.24digits)and
conrmit
or ,SaveSelectandconrmaringingmelody
Storing a quick dial entry
M1orM2 Presstherequiredquickdialbutton
Option, Select"Newentry"
Save Enterthename(max.16letters)andconrmit
Save Enterthephonenumber(max.24digits)and
conrmit
Ifyouseea<or>icon,therearemoredigitstobe
viewedthancanbeshownonthedisplay.Pressthe<
or>keytoviewthedigits.
Pro_600_800.indd 7 2008-11-11 16:17:34
8
Telephone
Making a call
 Enterthephonenumber(max.24digits)
Followingincorrectinput,presstodelete
the last digit
Dialthephonenumber
Itisalsopossibletopresstheexternalcallbuttonrst
toobtaindiallingtone.Thedigitsenteredwillthenbe
dialledimmediately.Itisnotpossibletocorrectwrong
digits individually using this dialling procedure.
End a call
End the call
Take a call
or Takethecall
Redial
Yourtelephonestoresthelast10telephonenumbers
dialled(max.24digitseach).
Open the redial list
or , or Selectanentryanddialthenumber
Calling back missed calls
Your telephone stores the last 30 incoming calls in the
calls list.
Open the calls list
or , or Selectanentryanddialthenumber
Dialling phone numbers from the phone book
Theremustbephonenumbersstoredinthephonebook.
Seepage19.Yourtelephonecanstoreupto200name
andnumberentriesinthephonebook.
Openthephonebook
or , or Selectanentryanddialthenumber
Quick dial
Phonenumbersmusthavebeenstoredasquickdial
numbers.Seepage7.
M1orM2 Presstherequiredquickdialbutton
or Dialthenumber
Telephone
Pro_600_800.indd 8 2008-11-11 16:17:34
9
Chain dialling
This feature is used for more complex telephone
services,egfortelephonebankingorcallingcard
procedures.Severalnumbersstoredinthephone
bookcanbedialledsuccessivelywhenaconnection
hasalreadybeenmade.Itisalsopossibletocombine
numbersfromthephonebookwithnumbersentered
manually.Numbersstoredinthephonebookcanbe
chainedandtransmittedasrequired.
Openthephonebookwhenaconnection
hasbeenmade
or , or Selectthephonebookentryand
transmitthenumber
Adjusting the receiver volume
The receiver volume of your telephone is louder than
with a standard telephone. Push up or down and release
for each volume step.
Wheninacall,adjustthesettingwith
the side switch
Boosting the receiver volume
When in a call, you can increase the loudness of each
volumesettingifyoupressthe30dBbutton.
Pressthebutton,aniconashesinthe
display
Handsfree
UseHandsfreetolistentoyourcallerviatheloudspeaker.
2X, Switch on handsfree mode
Deactivate handsfree mode
Adjusting the Handsfree volume
Thereare5handsfreevolumelevelsavailable.The
"30dB"featureisnotavailableinhandsfreemode.
Adjustthevolumewiththesideswitch.
Talk time display
The duration of each call is displayed in minutes and
seconds during the call.
Telephone
Pro_600_800.indd 9 2008-11-11 16:17:35
10
Muting the microphone
Themicrophonecanbeactivatedanddeactivatedduring
a telephone conversation when you are in handset or
handsfree mode.
, Mute On Switches the microphone off (Mute).
, Mute Off Switches the microphone on
Ringer on/off
Youcanturnthebelloftheringeronandoff.
2 sec Switchesthebellringeroff
2 sec Switchesthebellringeron
Keylock
Callscanstillbeansweredinthenormalwaywhenthe
keylockison.
2 sec , Locksthekeypad
,# Unlocksthekeypad
Making internal calls
Theremustbetwoormorehandsets(HS1,HS2)
registeredtoabasestationinordertomakeinternal
calls free of charge.
HS1:<INT, ,eg2 Dialtheinternalcallnumberofthe
requiredhandset
HS2: Accept the internal call on the other
handset
HS1/HS2: End the internal call
Transferring external calls internally
HS1:<INT, , eg 2 During an external call, dial the
numberoftherequiredhandset
HS2: Accept the internal call on the other
handset
HS1: External call is transferred to the other
handset
Ifthecalledhandsetdoesnotanswer,youcantakethe
callbackbypressingthe
button.
Telephone
Pro_600_800.indd 10 2008-11-11 16:17:35
11
Conference calls
Youcanholdaconferencecallbetween1externaland2
internal callers.
HS1:<INT, , eg 2 During an external call, dial the
numberoftherequiredhandset
HS2: Accept the internal call on the other
handset
HS1:Conf Activatesconferencecall
HS1orHS2: End conference call
Handset registration
Youonlyneedtoregisterahandsetthathasbecome
deregisteredfromthebaseorifyouhavepurchaseda
new handset.
Newadditionalhandsetsmustbefullychargedbefore
you attempt to register them.
At the base
10sec , Activate registration mode
At the handset
, or , Openthemenu,select"Handset"
or , , Select "Registration", "Register"
or , , Select1,2,3or4
, , EnterthePINcodeandconrm
Handset deregistration
Youwillonlyneedtode-registerahandsetifyoudecide
that you have too many handsets registered or your
handset develops a fault and you need to replace it.
, or , Openthemenu,select"Handset"
or , , , Select"Registration","De-register"
, , EnterthePINcodeandconrm
, Enterthehandsetnumberandconrm
Telephone
Pro_600_800.indd 11 2008-11-11 16:17:36
12
Using the menu
Using the menu
Answering Machine (Pro800 Only) (see page 23)
Phone book (see page 19)
Priority/Default Setting
If you are the main user of this telephone you should
change the settings in the menu so that they are
justrightforyou.Thesesettingswillbememorised
automaticallywheneveryouwishtomakeoranswera
call.
Theuserprolefeaturecanbeusedbyothersin
thehouseholdwhosepreferencesforvolume,boost
andEqualiserwillalsobememorisedandappliedas
indicatedbelow.
User Proles
Youcanstore2differentuserproles,eachwith
differentsettingsforthe"Volume","Boost"and
"Equaliser"features.Youcanalsopersonaliseeach
Prolebynamingit(Max10letters).
Changing the Prole name
Youcanpersonaliseeachprolebynamingit.
, or , OpentheMenu,select"Prole"
or , Select"Prole1or2"
or , Select"Name"
Delete the current name
Save Enterthenewnameandconrmit(max.
10letters).
Changing the Prole Handset Volume
Thereare5volumesettingsavailable.
or , Select"Volume"
3 The current setting is shown
or , save Selectandconrmthehandsetvolume
Changing the Prole "Boost" setting
or , Select "Boost"
Off The current setting is shown
or , Selectandconrm"On"or"Off"
Pro_600_800.indd 12 2008-11-11 16:17:36
13
Using the menu
Changing the Prole "Equaliser" setting
or , Select"Equaliser"
or ,save Selectandconrm
Press the keytoreturntostandby.
Copy a User Prole
Youcancopyauserproletoanothercompatible,
registered handset.
, or , OpentheMenu,select"Prole"
or , Select"Prole1or2"
or , Select "Copy"
<>2,3,4 Select the handset
or Conrmorcancel
Selecting a Prole for use
Incoming calls
Whenyoureceiveanincomingcallandbeforeyou
answerthetelephone,presstheM1orM2keyforthe
proleyouwishtouse.
Thedisplaywillconrmtheprolethathasbeen
selected and you can answer the call as normal.
Outgoing calls
Whenyouwishtomakeanoutgoingcall,pressandhold
theM1orM2keyfortheproleyouwishtouse.The
displaywillconrmtheprolethathasbeenselected
andyoucannowmakeyouroutgoingcallasnormal.
UserprolescannotbeselectedinHandsfreemode.
If you do not dial your outgoing call within 30 seconds
ofpressingtheM1orM2key,theselectedprolewill
timeoutandthedefaulttelephonesettingswillbeused
for the call.
Pro_600_800.indd 13 2008-11-11 16:17:36
14
Using the menu
Handset
Handset Ringing melody
Thereare10differentringingmelodiesavailable.
, or , OpentheMenu,select"Handset"
Select "Ring tone"
or , Select "External" or "Internal (intercom)"
Melody 8
(External)
,
Melody 8
(Internal)
The current setting is shown
or , Save Selectandconrmaringingmelody
Handset Ringing volume
Thereare5ringingvolumesettingsavailableand"OFF".
, or , OpentheMenu,select"Handset"
, Select "Ringer volume"
Volume3 Thecurrentsettingisshown
or , Save Selectandconrmaringingtonevolume
or"OFF"
Equaliser
UsetheEqualiserfeaturetoadjustthetoneandhigh
frequenciesuntiltheyarerightforyou.
, or , OpentheMenu,select"Handset"
or , Select"Equaliser"
or , Save Adjustthesettingsandconrm
Youcanalsoadjusttheequalisersettingswhenyou
are in a call. Press the middle of the
keyto
switchbetweenthevolumecontrolandtheEqualiser.
Whentheequaliserscreenisdisplayed,usetheupor
down of the
keytoadjustthesetting.
Boost Memory
With this feature set to "On" if you use the , button,
yourhandsetwillrememberanduseyourlastBoost
setting for each call.
, or , OpentheMenu,select"Handset"
or , Select "Boost memory"
Off The current setting is shown
or , Selectandconrm"On"or"Off"
Pro_600_800.indd 14 2008-11-11 16:17:37
15
Using the menu
Handset name
Youcanpersonaliseyourhandsetbynamingit(max.12
letters).
, or , OpentheMenu,select"Handset"
or , Select"Handsetname"
Delete the current name
, Save Enternewnameandconrmit
Keypad Beep
, or , OpentheMenu,select"Handset"
or , Select "Keypad Beep"
On The current setting is shown
or , Selectandconrm"On"or"Off"
Contrast
Thereare5differentcontrastlevelsavailablesothatyou
cansetthedisplaytohowyounditmosteasytoread.
, or , OpentheMenu,select"Handset"
or , Select "Contrast"
Level3 Thecurrentsettingisshown
or , Selectandconrmthecontrastsetting
Auto talk
With this feature set to "On", your handset will
automaticallyanswerthecallwhenyoupickupthe
handsetfromthebase.
, or , OpentheMenu,select"Handset"
or , Select"Autotalk"
Off The current setting is shown
or , Selectandconrm"On"or"Off"
Backlight time
Youcanselectthenumberofseconds10,20,30or40
beforethebacklightturnsoff.
, or , OpentheMenu,select"Handset"
or , Select"Backlighttime"
10S Thecurrentsettingisshown
or , Selectandconrm
Pro_600_800.indd 15 2008-11-11 16:17:37
16
Using the menu
Conrm beep
, or , OpentheMenu,select"Handset"
or , Select"Conrmbeep"
On The current setting is shown
or , Selectandconrm"On"or"Off"
Select base
(This allows the handset to work on multiple bases)
, or , OpentheMenu,select"Handset"
or , Select"Selectbase"
Auto The current setting is shown
or , Selectandconrm"Auto"or"Manual"
Language
Thereare5languagesavailable,English,German,
French,SpanishandItalian.
, or , OpentheMenu,select"Handset"
or , Select"Language"
English The current setting is shown
or , Selectandconrmalanguage
NZ Caller ID
, or , OpentheMenu,select"Handset"
or , Select"NZCallerID"
Off The current setting is shown
or , Selectandconrm"On"or"Off"
Pro_600_800.indd 16 2008-11-11 16:17:38
17
Using the menu
Base settings
Base Ringing melody
Thereare10differentringingmelodiesavailable.
, or , Open the Menu, select "Base settings"
Select "Ring tone"
3 The current setting is shown
or , save Selectandconrmaringingmelody
Base Ringing volume
Thereare5ringingvolumesettingsavailableand"OFF".
, or , Open the Menu, select "Base settings"
, Select "Ringer volume"
Level3 Thecurrentsettingisshown
or , save Selectandconrmaringingtonevolume
or "Off"
Shaker
Youcanplugashakeraccessory(VIB100notincluded)
intothesocketonthebackofthebase.Thiscanbe
purchased separately from the reseller where you
purchased the product, or directly from Oricom (Australia).
Withthisfeatureturned"ON"theshakerwillvibratewhen
you receive an incoming call.
, or , Open the Menu, select "Base settings"
, Select"Shaker"
On The current setting is shown
or ,save Selectandconrm"On"or"Off"
System PIN
, or , Open the Menu, select "Base settings"
or , Select"SystemPIN"
, EntertheoldPINandconrmit
2x , EnterthenewPINandconrmit
Pro_600_800.indd 17 2008-11-11 16:17:38
18
Using the menu
Time
Date/Time
, or , Open the Menu, select "Time"
Select "Date and Time"
, save Enter the day, month and year, followed
bythetimein24hourclockandconrm.
Set Time Format
, or , Open the Menu, select "Time"
, Select "Set time format"
24Hour Thecurrentsettingisshown
or , Selectandconrm"12hour"or24hour"
Alarm
Set Alarm
, or , Open the Menu, select "Alarm"
Select "Set alarm"
or , SelectOnce,EveryDay,MontoFriorOff
, save Enterthealarmtime(24hourclock)and
conrm
, save Selectthealarmmelodyandconrm
Night Light
, or , Open the Menu, select "Alarm"
or , Select"Nightlight"
On The current setting is shown
or ,save Selectandconrm"On"or"Off"
Pro_600_800.indd 18 2008-11-11 16:17:38
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Oricom pro800 DECT User manual

Oricom
Brand
Oricom
Model
pro800 DECT
Category
Telephones
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents