BABYTREND Go Gear™ Kid Café 5-in-1 High Chair Owner's manual

Type
Owner's manual

This manual is also suitable for

HC38F
Go Gear™ Kid Café 5-in-1 High Chair
Instruction Manual
Manual de Instrucciones
Manuel d’instruction
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND
FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend
®
warranty covers workmanship defects within the rst 180 days of
purchase. Any product which has been subjected to misuse, abuse, abnormal use,
excessive wear and tear, improper assembly, negligence, environmental exposure, alteration
or accident, or has had its serial number altered or removed invalidates all claims against
the manufacturer. Any damage to property during installation is the sole responsibility of the
end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday
through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior
to returning product(s) to Baby Trend
®
. Warranty only valid in North America.
GARANTIA
NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND
PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.
La garantía de Baby Trend
®
cubre defectos de fábrica dentro de los primeros 180 días de
la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,
desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o
accidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos
contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva
responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser
contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00am y 4:30pm (PST).Un numero
de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend
®
.
Garantia válida sólo en América del Norte.
GARANTIE
NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY
TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.
La garantie Baby Trend
®
couvre les vices de fabrication dans les 180 jours suivant l'achat du
produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure
excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la
modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes
les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de
la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)
328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant
de retourner le produit à Baby Trend
®
. Garantie valable uniquement en Amérique du Nord.
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
Baby Trend, Inc.
1607 S. Campus Ave.,
Ontario, CA 91761
www.babytrend.com
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Lea todas las instrucciones ANTES de armar y USAR el producto.
CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.
Lisez toutes les instructions du manuel AVANT l’assemblage
ou L’UTILISATION de ce produit. CONSERVEZ CES
INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.
www.babytrend.com
HC38xxxF_3L_102618
WARNING
2
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
PARTS
1
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Check that you have all the parts for this model before assembly.
Upper Frame Assemblies (X2)
Booster Seat
Harness Covers (X2)
Seat Pad
Tray InsertTray
Legs (X2) Casters (X4)
Footrest
Height Adjuster
WARNING: The tray is not
designed to hold the child in the chair.
WARNING: It is recommended
that the booster seat be used in the
upright position only by children
capable of sitting upright unassisted.
WARNING:
Always secure the Booster Seat on
a chair using the bottom and back
attachment straps. Never use this
Booster Seat on a stool or bench that
does not have a seat back. Minimum
adult chair size: Width: 16.1inch,
depth: 16.9inch, backrest height:
4.7inch.
NEVER lift this product with your child in it.
DO NOT use this product if it is damaged or broken.
BOOSTER SEAT TO CHAIR
WARNING: Children have suffered head injuries,
including skull fractures, after falling with or from booster seats.
• Check that booster seat is securely attached to adult
chair before each use.
ALWAYS use restraints until child is able to get in and out of
booster seat without help. (about 2 1/2 years old)
Adjust to t snugly.
NEVER allow child to push away from table.
NEVER lift and carry child in booster seat.
STAY NEAR and watch your child during use.
ALWAYS check security of t to adult chair before each use and
limitation of the product.
NEVER use this product on a stool or bench that does not have
a seat back.
WARNING: Prevent serious injury or death. Do not
use in motor vehicles.
Min 16.9"
Min.
4.7"
Min 16.1"
WARNING
3
WARNING
4
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING:
Failure to follow these warnings and
the instructions could result in serious injury or death.
WARNING: Prevent serious injury or death
from falls or sliding out. Always use the restraint
system.
• NEVER leave child unattended. Always keep your
child in view while in this product. Never allow a child
to push away from tables
STRANGULATION HAZARD:
Do not place High Chair in any location in any location
where there are cords, such as a window blind cords,
drapes, phone cords etc.
WARNING: The child should be secured in
the high chair at all times by the 5-point restraining
system, either in the reclining, semi-reclining or upright
position. The tray is not designed to hold the child
in the chair. It is recommended that the high chair be
used in the upright position only by children capable of
sitting upright unassisted. See page 9 for instructions
on proper use of restraint system.
ONLY approved Snap Fit™ products can be used on
the frame.
• Other accessory items may change the balance
of the high chair and cause hazardous unstable
conditions, use approved Baby Trend SNAP TECH™
products only.
• Be certain the high chair is fully erect and latched in
the open position before allowing the child near the
high chair.
• Use of the high chair with a child weighing more than
40 pounds will cause excessive wear and stress on
high chair.
NEVER allow your high chair to be used as a toy.
FALL HAZARD Never move or lift the high chair
with a child in it.
NEVER use this product if there are any loose or
missing fasteners, loose joints, broken parts, or torn
mesh/fabric. Check before assembly and periodically
during use. Contact Baby Trend Customer Service
at 1-800-328-7363 for replacement parts, repair or
instructions. NEVER substitute parts.
5
6
ASSEMBLY ASSEMBLY
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ASSEMBLE FRAME
WARNING:
Do not sit
on the frame when the seat is
not attached. Do not use frame
as a foot stool.
1) • Take the left and right Upper Frame
Assemblies, push the legs apart until
fully open and locked. Push downward
on fold levers (left and right) to ensure
frame is locked open (Fig. 1a).
• Insert the front tube of the right and left
side Upper Frame Assemblies into the
Height Adjuster (Fig. 1b). The front tube
is easily distinguished from the rear
tube by the array of holes located on the
backside of the front tube.
IMPORTANT!
To ensure safe operation of your product, please follow
these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges. NEVER
use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
IMPORTANT! Always check that the high chair is locked in the open
position before using.
Fig. 1a
Fig. 1b
ATTENTION:
Carefully remove parts from box. Check that you have all the parts for this model
before assembling the high chair.
Push
Push down
to lock open
2) • Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 2).
3) • Insert the legs into the ends of the Front
tube of both the right and left Upper
Frame Assemblies (Fig. 3a).
NOTE: Legs are properly connected
when the locking pins are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the
locking pins are engaged before use.
• Insert the other Legs into the ends of
the Rear tube of both the right and left
Upper Frame Assemblies (Fig. 3b).
NOTE: Legs are properly connected
when the locking pins are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the
locking pins are engaged before use.
4) Attach each of the Casters to the high
chair leg (Fig. 4). Snap casters into
bottom of the leg. Check that all four
Casters are securely fastened to the
high chair.
Release Handle
Fig. 2
Fig. 3a
Fig. 3b
Fig. 4
7
8
ASSEMBLY ASSEMBLY
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ASSEMBLE BOOSTER SEAT
ONLY approved Snap Fit™ products can be
used on the frame.
5) • Slide Footrest posts into the front of the
Seat until it clicks into place (Fig. 5a).
• Connect the Seat and lock into place (Fig.
5b). Pull up and make sure it’s locked
rmly in place before use (Fig. 5c).
TO ATTACH TRAY
WARNING:Always
check that the high chair is
locked in the open position
before using.
WARNING: The tray
is not designed to hold the
child in the chair. The child
must be secured in the high
chair at all times by the
5-point restraining system,
either in the reclining, semi-
reclining or upright position.
Do not force the tray against
the child.
6) • To attach the Tray, line up the Grooves
on the bottom of the Tray with the
armrests of the high chair. Squeeze the
front release handle and slide the Tray
onto the armrests (Fig. 6a).
Fig. 5a
Fig. 5b
Fig. 5c
The Tray has a 3-position adjustment.
To adjust the position, squeeze the front
release handle located underneath
the Tray and reposition the Tray to the
desired position. Release the Tray’s
handle. Make sure the Tray is securely
locked in its new position before use.
ATTENTION:
Never leave the tray in a position where the
warning signs are visible (Fig. 6b).
TO ATTACH INSERT TRAY
7) • The dishwasher safe Tray Insert snaps
onto the High Chair Tray and is held in
place by tabs on the sides of the Tray.
When installing the Tray Insert make sure
that it snaps into place to prevent the child
from removing the Tray Insert. To remove
Insert unsnap tabs from the Tray (Fig. 7a).
• The Tray may be stored on the back legs
of the High Chair. Align the holes in the
rear of the tray with the small pegs on the
back legs (Fig. 7b).
Fig. 6a
Fig. 6b
Release Handle
Groove
Fig. 7a
Fig. 7b
9
10
OPERATION OPERATION
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO USE SAFETY BELT
WARNING: It is
recommended that only children
capable of sitting upright
unassisted use the high chair in
the upright position.
WARNING: Prevent
serious injury or death from
falls or sliding out. Always use
the restraint system. The child
should be secured in the high
chair at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
The Tray is not designed to hold the child in
the chair. Always keep child in view while in
high chair.
NEVER leave child unattended.
8) • The shoulder straps of the 5-point
harness have 2 attachment positions.
Select the position that places the
shoulder strap level with, or below, the
top of the child’s shoulder (Fig. 8a).
Carefully place the child in the seat and
position the safety harness around the
child’s waist and over the shoulders.
Place the crotch strap between the
child’s legs. Insert the male end of each
shoulder/waist belt into the buckle on the
crotch strap. Tighten the harness to be
snug around the child’s waist and over the
child’s shoulders (Fig. 8b).
Fig. 8a
Fig. 8b
Adjust for a snug t
TO RELEASE THE CHILD
9) • To release the harness, push Button on
Center Clasp, the two Harness Buckles
will pop free (Fig. 9).
RECLINE SEAT
10) • Squeeze recline lever on back of the
seat and adjust to the preferred recline
or upright position (Fig.10).
Use caution not to trap arms, hands and
ngers when adjusting recline positions.
TO ADJUST SEAT HEIGHT
WARNING:
Do not adjust
seat height with child in seat.
Adjust seat height before placing
your child in the high chair.
WARNING: Always
check that the height adjustment
bracket is level and both left and
right sides locked before placing
child in the high chair.
WARNING: Never rest
the height adjustment bracket
on the locking pins.
11) • Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 11a) and adjust to the
ideal position (Fig. 11b).
DO NOT adjust with child in the seat.
Fig. 11a
Fig. 11b
Release
Handle
Fig. 10
Fig. 9
Center Clasp
Highest Position
Lowest Position
11
12
OPERATION OPERATION
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ATTENTION:
Make sure the Height Brackets lock on the
lowest position. DO NOT rest Height Adjustment
Brackets on the Locking Pins (Fig. 11c).
ADJUSTING THE FOOTREST
12) • Press the buttons on both sides of the
Footrest to adjust the Footrest up or
down (Fig. 12).
BRAKES
13) • To engage brakes, apply downward
pressure to the brake tabs. Check that
the High Chair will not move and that
brakes are properly applied. To release,
lift up on the brake tabs (Fig. 13).
Fig. 12
Fig. 13
Fig. 11c
TO FOLD HIGH CHAIR
The High Chair may be folded with the seat in
any of the height positions.
14) • Place seat in the desired height position.
Place Seat Back in the most upright
position (Fig. 14).
15) • Squeeze the Tray release handle and
slide the tray out (Fig. 15).
16) • Hang the Tray on the pegs located on
the back of the rear leg (Fig. 16).
17) • Pull upward on the release levers
(located on the sides of the frame) and
push the rear legs in the direction of the
front legs until folded (Fig. 17). Chair is
now ready to put away.
This is not a toy. DO NOT allow your
child to play around a folded high chair.
TO UNFOLD HIGH CHAIR
Reverse steps above.
Fig. 14
Fig. 15
Fig. 17
Fig. 16
Release Handle
14
OPERATION
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING
13
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING: Prevent serious injury or death from
sliding out, falls or tipping over.
- Always secure child in the restraint until child is able to get in and out of the booster
seat without help (about 2 1/2 years old).
- NEVER leave child unattended.
- NEVER allow a child to push away from table.
- Always secure the product on a chair using the bottom and back attachment straps.
- NEVER use this product on a stool or bench that does not have a seat back.
WARNING: Prevent serious injury or death. Do not
use in motor vehicles.
WARNING: Until child is able to get in and out of
the booster seat without help (about 2 1/2 years old), the
child should be secured in the booster seat at all times by
the restraining sytem. The tray is not designed to hold the
child in the chair.
WARNING: It is recommended that the booster
seat be used in the upright position only by children
capable of sitting upright unassisted.
NEVER lift this product with your child in it.
DO NOT use this product if it is damaged or broken.
TO ATTACH BOOSTER SEAT TO CHAIR
TO ATTACH BOOSTER SEAT
TO CHAIR
WARNING: Always
secure the Booster Seat on a
chair using the bottom and back
attachment straps. Never use
this Booster Seat on a stool or
bench that does not have a
seat back.
18)
Detach Seat from Upper Frame Assembly
by pushing both center buttons on each
side of the seat and lifting seat upwards
(Fig. 18).
NOTE: For the high chair seat only:
DO NOT remove with child in the high
chair seat.
19) • Remove Footrest by pushing the release
button on each side of the seat and pulling
Footrest out of the Seat (Fig. 19).
20) • Turn Booster Seat over. Slide Strap
Compartments open on the bottom of the
Booster Seat (Fig. 20a).
• Pull the straps out of the Compartment
(Fig. 20b). Then place the Booster Seat
onto a chair that has a seat back with no
armrests. Make sure there are not extra
paddings or cushions on the chair.
Release Buttons
Fig. 20a
Fig. 20b
Fig. 18
Fig. 19
15
16
OPERATION OPERATION
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO REATTACH SEAT PAD
22) • Thread non-buckle end of Harness
Straps called Harness Attachment
Tabs through the provided slots in the
Seat Fabric, Seat Back (Fig. 22a), and
Seat Base (Fig. 22b). When Harness
Attachment Tabs are through the
provided slots, rotate the Harness
Attachment Tabs 90 degrees. Make sure
that the straps are rmly in place.
23) • Loop the ap on the back of the pad
over the top of the Seat Back (Fig. 23a).
Connect the Seat Pad to the Seat Back
with the two Elastic Loops. These t
over the Attachment Tabs located near
the top harness slots (Fig. 23b).
• Insert the Harness Covers through the
Harness Straps (Fig. 23c).
TO REMOVE SEAT PAD
Reverse steps above.
• Wrap the back straps around the back of
the chair. Buckle the straps making sure
you hear the buckle *CLICK* closed
(Fig. 20c).
• Pull the free ends of the strap to rmly
tighten the Booster Seat to the chair
(Fig. 20d).
Wrap bottom straps around the bottom of
the chair. Buckle the straps making sure
you hear buckle *CLICK* closed (Fig.
20e).
• Pull the free ends of the straps to rmly
tighten the Booster Seat onto the chair
(Fig. 20d).
Check that the Booster is tightly installed
by attempting to move the Booster Seat
from side-to-side and up. The Booster
Seat should not move more than 1 inch.
TO REMOVE BOOSTER SEAT
FROM CHAIR
21) • Unbuckle the back and bottom straps
(Reference Step 20). Turn Booster Seat
over. Slide Strap Compartments open
on the bottom of the Booster Seat (Fig.
21a).
• Fold the straps and put them in
the compartment, then slide the
Compartment Door closed (Fig. 21b).
Fig. 20c
Fig. 20d
Fig. 20e
Fig. 21a
Fig. 21b
Fig. 23a Fig. 23c
Fig. 22a
Fig. 22b
Fig. 23b
17
18
INFANT CAR SEAT INFANT CAR SEAT
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH CAR SEAT
25)
Connect the Car Seat and lock into place
(Fig. 25a). Make sure its locked rmly in
place before use (Fig. 25b).
TO REMOVE CAR SEAT
26) • Detach Car Seat from Upper Frame
Assembly by pushing both center
buttons on each side of the seat and
lifting seat upwards (Fig. 26).
INFANT CAR SEAT
WARNING: To avoid
serious injury from falling or
sliding out, always use the Infant
Car Seat harness.
ONLY approved Snap Fit™ products can be used
on the frame.
TO ADJUST THE CAR SEAT HEIGHT
WARNING:
Do not adjust
car seat height with child in seat.
Adjust seat height before placing
your child in the car seat.
WARNING: Always
check that the Height Adjustment
Bracket is level and both left and
right sides locked before placing
child in the car seat.
WARNING:
Never use
the car seat mode at any of the
higher positions. Always use the
car seat at the lowest position.
WARNING: Never rest the
height adjustment bracket on the
locking pins.
24)
Squeeze both left and right Release
Handles of the Height Adjustment Bracket
and adjust to the lowest position (Fig. 24a).
DO NOT adjust with child in the seat.
ATTENTION:
The Height Adjustment Bracket must be set at the
lowest postion before placing car seat (Fig. 24b).
Fig. 24b
Fig. 24a
Release Handle
Lowest Position
Fig. 25a
Fig. 25b
Fig. 26
20
MAINTENANCE
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
19
INFORMATION
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ONLY approved SNAP TECH
TM
products can be used on the frame.
CAR SEAT MODE
Face in either direction,
front or backwards.
CARE AND MAINTENANCE
WARNING: Harness Straps and Basket are NOT
washable.
Dishwasher Safe Tray Insert:
The Tray Insert is dishwasher safe to 160º F (71º C).
Do not use scouring pads on the Tray Insert as they will damage the surface and
the Tray Insert will become more difcult to clean.
High Chair/Tray: Use mild soap and wash with damp cloth. Please use only a
soft bristle brush, sponge or cloth to clean the surface or remove particles of food.
DO NOT submerge High Chair and Tray in water. Surface clean only.
Seat Pad:
To remove the seat pad: Remove Harness Straps by pushing Harness Attachment
Tabs through the Harness slots on the Seat Back, Seat Base and Seat Pad.
Remove Elastic Loops from Attachment Tabs on Seat Base and Seat Back.
To attach the seat pad: Carefully follow the instructions outlined in Step 22 on how
to correctly re-thread the safety harness.
(To clean the Seat Pad, Body Insert and Harness Covers, please refer to the care
label on the Seat Pad).
Non-Washable Seat Pad: Use mild soap and wipe with damp cloth. NOT
MACHINE WASHABLE.
Washable Seat Pad: Machine Wash COLD DELICATE CYCLE with non-
chlorine based Laundry Detergent. DO NOT USE BLEACH. HANG DRY.
DO NOT MACHINE DRY.
Infant car seat sold separately
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

BABYTREND Go Gear™ Kid Café 5-in-1 High Chair Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI