2. ROOMS TO GO
  3. 40403329

ROOMS TO GO 40403329 Assembly Instructions

  • Hello! I've reviewed the Assembly Instruction document for the 8033 chair. It outlines a straightforward, three-step process for assembly, emphasizing the need for assistance due to the weight of the components. The document lists all parts with identifiers to guide you through the steps ensuring a safe and efficient setup. I'm ready to answer your questions about the assembly process or the included parts.
  • What is the first step of assembly?
    When should I tighten the bolts?
    What is the final step?
PARTS MRP# DESCRIPTION
Q'TY
A
B
C
D
E
Bolt(5/16"*1-3/4")
Bolt(5/16"*2-1/4")
Allen wrench(5mm)
Flat washer(5/16*12mm)
4
4
1
8
8
MODEL: 8033 Fun Chair
Flat washer(5/16*19mm)
C
B
D
E
C
D
E
CAUTION: PLEASE READ ALL INSTRUCTIONS BEFORE STARTING THE ASSEMBLY OF
THIS PRODUCT. THESE PIECES ARE HEAVY. IN ORDER TO PREVENT PERSONAL
INJURY AND ENSURE THAT THIS PRODUCT IS NOT DAMAGED DURING THE
ASSEMBLY PROCESS, IT IS STRONGLY RECOMMENDED THAT YOU ENLIST THE
ASSISTANCE OF ONE OR MORE PEOPLE.
ATTENTION : VEUILLEZ LIRE TOUTES LES INSTRUCTIONS AVANT DE COMMENCER
L’ASSEMBLAGE DE CE PRODUIT, LES PIEOCES SONT LOURDES. POUR
EUVITER TOUTE BLESSURE ET POUR VOUS ASSURER QUE LE PRODUIT N’EST
PAS ENDOMMAGE’ PENDANT L’ASSEMBLAGE， NOUS VOUS RECOMMANDONS
DE FAIRE APPEL AO UNE OU PLUSIEURS AUTRES PERSONNES .
CUIDADO: FAVOR DE LEER TODAS LAS INSTRUCCIONES ANTES DE ENSAMBLAR SU
PRODUCTO. ESTAS PIEZAS SON PESADAS. PARA PREVENIR HERIDAS
PERSONALES Y ASEGURAR QUE SU PRODUCTO NO SEA DAN ADO MIENTRAS
ES ENSAMBLADO, SE RECOMIENDA LA ASISTENCIA DE UNA O MAUS
PERSONAS.
STEP 1
Unzip the zipper from the seat frame.
Attach rear legs to the seat frame as shown.
Do not tighten before Step 2.
STEP 2
Attach front legs to seat frame and
tighten all bolts at this step.
Zip back the zippers after all bolts are
tightened.
STEP 3
Turn the chair up right.
Assembly is complete.
ASSEMBLY INSTRUCTION
/